Kraus UN-ISO-68-A Solid-Mount Isolated and Pullback Handlebar Risers Instruction Manual
- June 12, 2024
- Kraus
Table of Contents
Kraus UN-ISO-68-A Solid-Mount Isolated and Pullback Handlebar Risers
Product Information
Kraus Isolated Risers for
The Kraus Isolated Risers are designed for use with
Replacement Part List
| Item | Qty | Part No. |
|---|---|---|
| ISO Riser Mid Section | ||
| ISO Riser Top Clamp | ||
| ISO Riser Legs | ||
| Stainless Steel Socket Head Screw |
Medium Strength Grade Steel Hex Head Screw, Zinc Plated,
Partially Threaded|
Riser Bushing Washer|
Touring Polyurethane Riser Bushing|
Metal Sleeve for Poly Riser Bushing|
Medium Strength Grade Steel Hex Head Screw, Zinc Plated, Fully
Threaded|
Mounting Bushing Sets (Included, quantity depends on
fitment)| –| –
Torque Specs
Type| Apply Blue Loc Tite| Grade| Hex Head Screw| Zinc Plated| Threaded|
Torque (ft. lbs.)
---|---|---|---|---|---|---
Solid Mount Riser Bushing Touring/Up SF| Yes| –| Fully Threaded| –| –| <Torque
Value>
DYNA/FXR/Below SF Solid Riser Bushing| Yes| Medium Strength| Hex Head Screw|
Zinc Plated| Fully Threaded|
Kraus Dynamoto Solid Riser Bolt Washer No Bushing| No| Medium Strength| Hex
Head Screw| Zinc Plated| Fully Threaded|
Stainless Steel Socket Head Screw| No| –| –| –| –|
Medium Strength Grade Steel Hex Head Screw, Zinc Plated,
Partially Threaded| No| Medium Strength| Hex Head Screw| Zinc Plated|
Partially Threaded|
If you have any further questions or need assistance, please contact our support team at support@krausmotorco.com.
REPLACEMENT PART LIST
| ITEM | QTY | PART NO. | PART |
|---|---|---|---|
| 1 | 2 | UN-ISO-001/021 | ISO RISER MID-SECTION (1˝/1-1/8˝) |
| 2 | 1 | UN-ISO-002/022 | ISO RISER TOP CLAMP (1˝/1-1/8˝) |
| 3 | 2 | UN-RI-35/45/75/95 | ISO RISER LEGS 3.5″, 5.5″, 7.5″, 9.5″ |
| 4 | 8 | 1173462 | 18-8 STAINLESS STEEL SOCKET HEAD SCREW, 1/4-20 X 1 |
| 5 | 2 | 110120384 | MEDIUM-STRENGTH GRADE 5 STEEL HEX HEAD SCREW, ZINC-PLATED, |
1/2-13 X 2-1/2, PARTIALLY THREADED
6| 4| UN-RI-014| RISER BUSHING WASHER – TOURING
7| 4 EA.| UN-RI-004| POLYURETHANE RISER BUSHING
8| 2 EA.| UN-RI-004| METAL SLEEVE FOR POLY RISER BUSHING
A or B| 2| 13824| MEDIUM-STRENGTH GRADE 5 STEEL HEX HEAD SCREW, ZINC-PLATED,
1/2-13 X 3, FULLY THREADED
C| 2| 1113821| MEDIUM-STRENGTH GRADE 5 STEEL HEX HEAD SCREW, ZINC-PLATED,
1/2-13 X 2, FULLY THREADED
MOUNTING BUSHING SETS INCLUDED: DEPENDS ON FITMENT
- FITMENT: ALL TOURING MODELS AND 2018 & UP SOFTAIL
- FITMENT: ALL DYNA, FXR, AND 2017 & BELOW SOFTAILS
- FITMENT: ALL MODELS RUNNING A KRAUS DYNAMOTO INVERTED FRONT END
TORQUE SPECS
- (SOLID MOUNT RISER BUSHING – TOURING /18 & UP SF) APPLY BLUE LOC-TITE 243 TO 1/2-13 X2-1/2,
- GRADE 5 ZINC PLATED HEX HEAD SCREW, FULLY THREADED – 55 FT. LBS.
- (DYNA/FX/17-BELOW SF SOLID RISER BUSHING) APPLY BLUE LOC-TITE 243 TO MEDIUM-STRENGTH
- GRADE 5 STEEL HEX HEAD SCREW ZINC-PLATED, 1/2-13 X 3, FULLY THREADED – 55 FT. LBS.
- (KRAUS DYNAMOTO SOLID RISER BOLT & WASHER (NO BUSING)) MEDIUM-STRENGTH GRADE 5 STEEL HEX HEAD SCREW ZINC-PLATED, 1/2-13 X2 LONG, FULLY THREADED – 55 FT. LBS.
- #04 18-8 STAINLESS STEEL SOCKET HEAD SCREW, 1/4-20 X1 – 13 FT. LBS.
- #05 MEDIUM-STRENGTH GRADE 5 STEEL HEX HEAD SCREW, ZINC-PLATED, 1/2-13 X2-1/2, PARTIALLY THREADED – 55 FT. LBS.
KRAUS ISOLATED RISER LEG REPLACEMENT INSTALLATION
INSTALLATION GUIDE:
- Loosen but do not remove two ½ x 13 bolts on the bottom of the triple tree.
- Remove one bolt and swing riser assembly to one side of the motorcycle
- Use heat to loosen Loctite in the upper portion of the riser leg.
- Use impact gun and 5/8 Allen to loosen the riser leg.
- Apply blue Loctite 243 to the new riser leg inner threads
- Install new riser leg and torque to 55 fibs
- Repeat the process for the opposite side
- Reinstall two ½ •13 × 3 bolts with blue Loctite to the riser leg and torque to 55 ft-lbs.
TOOLS NEEDED
- ⅝ allen 3/8 or 1/2 drive
- ¾ socket 3/8 drive
- Impact gun air or electric
- Heat source map gas, heat gun
- support@krausmotorco.com
Documents / Resources
|
Kraus UN-ISO-68-A Solid-Mount Isolated and Pullback Handlebar
Risers
[pdf] Instruction Manual
UN ISO, UN RI X, UN-ISO-68-A, Solid-Mount Isolated And Pullback Handlebar
Risers, UN-ISO-68-A Solid-Mount Isolated And Pullback Handlebar Risers,
Isolated And Pullback Handlebar Risers, Pullback Handlebar Risers, Handlebar
Risers
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>