NEXSENS CB-150 Instrument Offset Mount Instruction Manual
- June 12, 2024
- NEXSENS
Table of Contents
CB-150/450 INSTRUMENT OFFSET MOUNT
INSTALLATION INSTRUCTIONS
Figure 1:
NexSens CB-150/450 Instrument Offset Mount.
Overview
The NexSens instrument offset mount extends the top mounting plate for
attachment of sensors, beacons, and other topside hardware to the solar panel
array of a NexSens CB-150, CB-250, or CB-450 series data buoy.
What’s Included
- (1) CB-OFF-M Instrument mount
- (1) 3/8-16 x 1-5/8” stainless steel bolt
- (1) 3/8-16 lock washer
- (1) 3/8-16 flat washer
Installation on NexSens Solar Tower
-
Remove a bolt from the top of the NexSens solar tower using a 9/16” socket wrench.
-
Place the instrument mount so that it rests on the solar assembly and align the holes.
a. Fasten the mount using the included 3/816 x 1-5/8” stainless steel bolt, washer, and lock washer.
-
Utilize the opening on the offset mount for mounting additional top-side sensors.
Note: The addition of any instrument weight to the top of a NexSens data buoy must be offset by proper ballast for unit stability. Reference your buoy’s Quick Start Guide for more information concerning deployment and mooring.
2091 Exchange Court
Fairborn, Ohio 45324
937-426-2703
www.nexsens.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>