REDRAGON TRIDENT Wired 2.4 Bluetooth Gaming Mouse Instruction Manual
- June 12, 2024
- REDRAGON
Table of Contents
REDRAGON TRIDENT Wired 2.4 Bluetooth Gaming Mouse
Please scan here to download user manual
Wired/2.4G/BT Gaming Mouse Operating Instructions
Dear user
Thank you for choosing our product. To protect your rights and for better customer service, we ask that you note our warranty rules.
- Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included.
- Consumable parts (such as foot pad) and spare parts replacement are not included in our warranty.
OS Support
WindowsXP/Vista/Win 7/Win 8/Win 10/Win 11
Installation
- Plug Nano receiver to USB port on your computer.
- Make sure the switch on bottom of mouse was set as ON mode.
- Press any key to get mouse ready to work.
Charging your mouse
The battery indicator LED located under the scroll wheel key, it is flash slowly in RED while gaming mouse is out of power, please connect the mouse and computer with the type cUSB cable, the charging time is around 2 hours, it is workable while charging.
Wake up your wireless mouse
To save power, Mouse was program with a sleeping mouse when it is out of work
for 1 minutes, Please press any key to wake up the mouse.
Wired connecting
Find true type C -USB cable in the packaging, witch the mode button to OFF (Located at mouse bottom), plug the mouse to PC by cable for wired connection, it is charging at the same time.
Pairing in 2.4G mode
Find USB Nano receiver in packaging, switch the mode button(Located at mouse
bottom) to 2.4G, plug the receiver to PC USB port, press any key of mouse for
activity.
Reconnection
Both of mouse and Nano receiver has a built-in code, It can be setting one
mouse to one receiver, or few of mouse to one receiver. Mouse and receiver
need to reconnect under the condition of High temperature, high magnetic,
strong vibrate.
Plug off Nano receiver from USB port, and plug it on.
Keep the mouse in 50CM with receiver, re-store the battery, put the switch
OFF: press and hold right key and scroll key and left key for three seconds.
Connection completely.
Pairing in bluetooth mode
Switch the mode button to BT (located at bottom of mouse), press and hold
mouse pair button (Right next to mode button)for 3 seconds, scan the device on
PC/tablet/notebook/MAC, find the mouse device name BT 5.1 Mouse.
Button Instructions
- Left mouse button.
- Right mouse button.
- Scroll wheel (click as middle mouse button}.
- Side key, defaulted function: FORWARD key on the keyboard.
- Side key, defaulted function: BACKWARD key on the keyboard.
- DPI+ button (defaulted to speed up the cursor).
- DPI- button (defaulted to slow down the cursor).
- Teflon foot pads: Large wear-resistant materials let the mouse move more smoothly.
DPI adjustment Instructions
User mode Indicator light : Located below the Scroll Wheel key.
- Red—- Gear 1 (500 DPI)
- Blue—- Gear 2 (1000 OPI)
- Green — Gear 3 (2000 OPI)
- Purple — Gear 4 (3000 DPI)
- Yellow — Gear 5 (8000 DPI)
Software Instructions
User can adjust the following settings through the software after downloading’s and installing it.
- Adjust the DPI of the mouse at the user’s discretion. (range: 500-4000 DPI).
- Adjust the polling rate of the mouse at the user’s discretion. (range: 125HZ-250HZ-500HZ-1 OOOHZ).
- Macros: Record up to 59 actions and trigger with one key.
- Continuous keystroke function: Set the number of clicks and delay time.
- Customized 7 mouse buttons.
- Customized RGB backlight in patterns/brightness/speed.
FAQ
- If the mouse is not responding, please check whether the mouse is plugged correctly in the corresponding computers USB port, or try another USB ports.
- If the mouse is moving slowly, jumping or with delay, please try another surface. Dark. dirty, un-flat, bright surfaces may affect the performance of mouse. Mouse pad strongly recommended.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used In accordance with the Instructions, may
cause harmful Interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
California Proposition 65
WARNING: Risk of Cancer from [Name of one or more chemicals known to
cause
cancer] And Reproductive Harm From [Name of one or more chemicals known to
cause reproductive toxicity] Exposure –
www.P65Warnings.ca.gov.
BATTERY SAFETY GUIDELINES
DO NOT replace the battery with a different model.
DO NOT use this product if the battery shows signs of damage including, but
not limited to tearing, deformation, leakage, or the smell of electrolytic
material.
DO NOT touch the battery fi material is leaking and seek immediate medical
attention if any material comes into contact with your skin or eyes.
DO NOT expose the battery to liquid, heat sources, electricity (outside of the
product Itself), or other non-standard operating condition,
DO NOT remove the battery except for proper disposal and recycling as required
by local laws and regulations.
DO NOT impact, bend, alter, dissemble, or otherwise damage the battery as the
contents are volatile, hazardous, and can be harmful.
CAUTION
Failing to follow all safety guidelines may result product damage, explosion,
fire, and/or electric shock.
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.