HUOER T60 Wireless Sport Bluetooth Earbuds User Manual
- June 12, 2024
- HUOER
Table of Contents
User Manual
Product description
Operating temperature: -5℃~40℃
Battery capacity: 45mA/h
Charging time: Approx. 90 minutes
Music time: Approx. 8 hours (moderate volume) Chip type: AC6976D4
Audio decoding: AAC, SBC
Speaker type: 13MM full-frequency composite film speaker
Frequency response range: 20Hz-20KHz
Standby time: 90 days
Connection distance: 12 meters
Model supported: It can be used in combination with bluetooth devices
supporting
AAC/HFP/HSP/AVRCP/A2DP protocol, such as mobile phones and computers to make a
call or listen to music, etc. Charge Box battery:650mA
Input current: 5V\300mA
Output current: 5V\50mA/h
Capacity of the battery in the battery case: 650mA/h Charge cycles: About 5
times
Function introduction
Power-on:
The earphone will be automatically turned on when the battery case is opened /
long press the power key for 3 seconds to turn on the earphone manually under
power-off status and the blue indicator light is kept on for 1 second, a pure
power-on prompt tone is eard, now the earphone is in a loop-connected status,
if there is a nearby device once connected and paired, the earphone will be
automatically loop-connected to such device, otherwise it will wait for about
7 seconds until the L main earphone is automatically paired and the blue
indicator light flashes to enter pairing mode.
Pair and connect to the device:
Turn on the mobile phone and bluetooth, search for “T60” device, click on
device icon to pair and upon successful connection, the L/R blue indicator
light will be kept on for 1 second and then goes out, now the connection
status of the earphone will be shown on the mobile phone.
Restore factory settings:
Power on
- Open the charging chamber, take out the earphone, and the earphone will turn on automatically.
- Manual long touch area 3 seconds power on Power-off:
Put the earphone into the battery case and close the cover, the earphone will be automatically turned off and be charged / long press the power key for 5 seconds to turn off the earphone manually under power-on status (the main and secondary earphone will be turned off at the same time), the blue indicator light will be kept on for 1 second and a pure power-off prompt tone will be heard.
Notes:
- If you want to use one earphone independently, you just need to put the other one into the battery case and the main earphone will be automatically switched to the one that you want to use, which will later be the main earphone by default; if you want to use the two earphones, take the other earphone out from the battery case and it will automatically be paired and connected to the main earphone.
Conventional functions:
Play/pause: Short master/slave earphone, prompt tone: Tone; Next song: Long
press the key on the right earphone for 2 seconds, prompt tone: Tone; Previous
song: Long press the key on the left earphone for 2 seconds, prompt tone:
Tone; Turn up the volume: Double press the right earphone, prompt tone: Tone;
Turn down the volume: Double press the left earphone, prompt tone: Tone;
Answer the phone: Short-press the left or right earphone when you receive a
call, prompt tone: Tone; Hang up the phone: Short-press the left or right
earphone on the phone, prompt tone: Tone; Reject the phone: Long press the key
on the left or right earphone for 2 seconds when you receive a call, prompt
tone: Tone;
Activate Siri: Triple-press the left earphone to activate Siri/Google;
Disconnect the device: Turn off the bluetooth, the main earphone is
automatically in the pairing mode and the blue indicator light of the main
earphone flashes; Automatic loop-connection: The main earphone will be
automatically loop-connected to the last device to be connected after the
cover of the battery case is opened and if such device is outside the range of
loop-connection, the main earphone will be automatically in the pairing mode
after 7 seconds;
Low power prompt: If the voltage is lower than 3.3V, you will hear a low-
power prompt tone: BatteryLow;
Automatic shutdown : The device will be automatically turned off if no
device is found to be connected within 5 minutes or the battery voltage is
lower than 3.2V;
Indicator status of the earphone:
Power-on: The device will be turned on after the blue LED indicator light is
kept on for 1 second; Power-off: The device will be turned off after the red
LED indicator light is kept on for 1 second; Pairing mode of the earphones:
The blue LED indicator lights on both earphones flash;
Connection waiting mode: The blue LED indicator light on the main
earphone flashes; Connection standby mode: The blue LED indicator light on the
L/R earphone will be kept on for 1 second after successful connection of the
device and then goes out; On the phone: The blue LED indicator light goes out;
Indicator status of the battery case:
- Charging box charging: plug in the USB charging cable, during the charging process of the charging bin,
- Charging the earphone with charging box (without external charger):
- The battery case is fully charged (plug wire):
Operation process
Please charge fully the earphone every time when you use it and sufficient
battery power shall be kept for the device or cellphone to be paired, turn on
the earphone to bring it into the pairing mode (the blue LED indicator light
flashes) and keep it as close as possible to the cellphone to be connected.
Turn on the mobile phone and BT function, click the search button to search
for the device to be connected and connect the device in several seconds, upon
successful connection, the blue indicator light will be kept on for 1 second
and goes out, the mobile phone displays that the device has been connected.
Use mobile phone to make calls and listen to the music, you can hear the sound
from both earphones, now the operation is over.
Notes
Please do not drop, impact, scratch, twist, knock, crush or throw the earphone
into the water;
The earphone shall be kept away from the magnet, electric appliance and
loudspeaker;
Protect the earphone from extreme temperature as far as possible (the working
temperature in the use environment ranges from -10℃ to 45℃);
Do not expose the earphone to humid environment.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.