HUOER T68 True Wireless Earbuds User Manual
- June 17, 2024
- HUOER
Table of Contents
T68 User Manual
TRUE WIRELESS EARBUDS
Package Accessories
Overview
Product Parameters
-
Supports: HSP/HFP/A2DP/AVRCP
-
Charging Interface: Point-Contact
-
Charging Cord Type: Type-C
-
Battery Capacity (Li-ion battery inside):
Earbud-45mAh
Charging case-650mAh -
Battery Life: Actual battery life changes with the song types and volume requirements
-
Standby Time: Up to lOOhrs
-
Charging Time: l-1.5hrs for earbuds/2hrs for charging case
-
Transmission Range: 33 feet (without obstacles)
First-Use
- Before the first use, please tear off the isolating film on the earbuds. Put the earbuds into the case, then charge both earbuds and charging case via supplied Type-C charging cable for at least 10 mins (or after not use for a long time); do not take out the earbuds during this period.
- The earbuds are installed with a pair of size M ear You can select other suitable sizes for a secure fit. tips by default.
How to Wear?
Step 1: Adjust earbuds downwards to a earbuds into your ears.
Step 2: Slightly adjust proper position and push earbuds to fit you best.
How to Pair?
Method 1:
-
Pick up two earbuds from the charging case. They will auto power on and pair with each other in 10s.
If the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically. Turn on the earbuds manually by pressing the MFB button for about 2 seconds to hear the prompt “power on”.
-
The white indicator light of dual earbuds flash to enter pairing mode.
-
On phone, search for “T59” and tap to connect.
You will hear “connected” from both earbuds. Then the indicator lights will turn off after the earbuds are connected.
Method 2:
- In the unconnected state, double click the MFB of two earbuds to enter pairging mode.
How to Reset?
- Take the earbuds out for 5-10 minutes to consume some battery of both buds. (Can’t be reset if the earbuds are fully charged)
- Put the earbuds back into the case and make sure both earbuds blink Red.
- Press and hold the buttons on both earbuds for 8 seconds. Close the case.
Maintenance
After a period of use, the charging metal contacts of the earbuds may be
contaminated with sweat and dirt, resulting in the earbuds aren’t able to
power on, charge, or having connection issues, and the protective grille of
both earbuds may accumulate earwax and
dust, resulting in muffled volume. Please use the cleaning swab to remove dust
or earwax from the charging contacts and the protective grille.
Indicator status of the earphone
Power-on: White light for ls;
Power-off: Red
light for ls;
Pairing mode of the earphones: White light of dual earbuds flash;
Device to be connected mode: White light of the main earphone flashes;
Connected to the standby state: White light on the L/R earphone for 1s after
connected, then goes out;
Phone state: White light goes out.
Indicator status of the battery case
- Charge the case: After plugging in the USB charging cable, the LED bar on the front will flash slowly during the charging process.
- Charge the earphone with charging case (without external charger): Put the earphone into the charging case, the earbuds will be charged immediately and the red indicator flashes.
- Charging case is fully charged (plug cable): LED indicator bar is steady on (flash slowly during charging).
Button Operation tips
Power on:
Pick up the earbud from chargingcase/ Preass and hold the MFB for 2s inpower-
off state
Power off:
Standby/Non-playing music, press and hold the MFB for Ss. Put into the
charging case/Not connected to any devices over 5 : minutes
Activate/Stop the voice assistant:
Triple click the MFB on L/R earbud
Reject call:
Press and hold the MFB on L/R earbud for 2s
Answer/End call: Click MFB once
Play/Pause: Click MFB once
How to Charge?
Type-C USB Charging
There is a Type-C USB charging cable in the package, please use it to charge
the case directly. During charging, the digital display will flash and show
the battery in real-time. After being fully charged, the number is displayed
as 100.
The right display panel indicates the charging status per headset.
There are separated power consumption indicators by 4 grids in total, the
indicator light will always flash during Charging.
Wireless Charging
Charge the case easily without cables, just put your charging case on the
wireless charging pad. If the charging case s not being charged, please try to
reposition it. (Wireless Charging Pad Not Included)
Troubleshooting Guide
Ql: What should I do when the earbuds can't be paired with device? my mobile
Al: Reset again. your earbuds and pair the earbuds with your mobile device
Q2: What to do when the earbuds can't be charged?
A2: The Charging Case may run out of power. Please least one hour, then put the earbuds into it to charge. Try to take out the earbuds and clean the the earbuds into the Charging charge it for at Charging Pins, then put Case to see if the display panels on the case light up or not. There may be some malfunction with your Charging Case. If your Charging after many attempts, please contact us. Case can't charge for earbuds
Q3: What should I do if there is no sound from one earbud?
A3: Turn off Bluetooth on the device and turn it on, then pair your earbuds with the mobile device again. For Android devices, if there is no sound from one earbud after connecting, you need to check whether the phone volume is too low. If the phone volume is normal, it may be that the volume of the earbud has been turned to the minimum. Please try to adjust the volume of the earbud.
Q4: What device can the earbuds be connected to?
A4: Devices with BT version over 5.0
QS: Can my earbuds be paired with multiple devices?
AS: The earbuds don't support this feature currently.
Q6: Can I use one earbud at a time?
A6: Yes. After connecting the earbuds to your mobile device, you can use them together or just use one earbud alone.
Q7: Can I activate voice assistant through my earbuds?
A7: Yes. You can wake up the voice assistant by tapping the Touch pad of either earbud 3 times after pairing the earbud with your mobile device.
FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. 15.21 Information
to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.