ANSMANN 1900-0120 Electric Vehicle Charging Cable User Manual

: June 12, 2024
: ANSMANN

Table of Contents

ANSMANN 1900-0120 Electric Vehicle Charging Cable
Product Information
Product Usage Instructions
SCOPE OF DELIVERY
INTENDED USE
SIGNS AND SYMBOLS
SAFETY INSTRUCTIONS
TECHNICAL DATA
OPERATION
CLEANING
DISPOSAL
WARRANTY INFORMATION
Customer service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANSMANN 1900-0120 Electric Vehicle Charging Cable

ANSMANN-1900-0120-Electric-Vehicle-Charging-Cable-
product

Product Information

Product Name: Electric Vehicle Charging Cable
Type: Type 2
Mode: Mode 3
Power: 22kW
Amperage: 32A

The product meets the requirements of the EU Directive. The charging cable is designed for use with electric and hybrid vehicles for charging at charging stations. It is compatible with vehicles using a Type 2 vehicle plug and an IEC62196-2 Type 2 infrastructure plug.

The cable has a rated voltage of 400V AC 50Hz and can handle a maximum output of 32A. It has a high voltage resistance of 2600V AC and a contact resistance of 0.3m (L/N). The cable is designed for 3-phase charging and has a resistor coding of 220. The charging cable has a protection class of IP55 when plugged in, making it resistant to dust and water splashes. It has a working humidity range of 5% – 95% (non-condensing) and can withstand operating temperatures within its specified range. The cable is available in two lengths: 5m (weighing 3.2 kg) and 7.5m (weighing 5.25 kg).

Product Usage Instructions

Before using the charging cable, make sure to read and follow the operating instructions of both the charging station and the electric vehicle.
Ensure that the vehicle is turned off and the gear lever is in the “Park” position.
Start the charging process at the charging station. The charging connectors will automatically lock into place.
If you need to stop the charging process prematurely, refer to the operating instructions at the charging station.
Once the charging process is completed, the charging connectors will automatically unlock.
Disconnect the charging connectors from both the charging station and the electric vehicle (make sure the vehicle is unlocked).
Place the protective caps on both charging connectors and store the cable in a clean and safe place, ensuring it is rolled up without any kinks.

Dispose of any unusable product in accordance with legal requirements.

SCOPE OF DELIVERY

22kW charging cable for electric vehicle
Storage bag
Instruction manual

First, unpack the product and check it for completeness and damages. Do not operate the product if it is damaged. Contact your retailer should you find any damage to the product.

INTENDED USE

Only use the cable for charging electric and hybrid vehicles with alternating current (AC) at charging stations. The cable may only be used together with standard-compliant and designated vehicle inlets according to IEC 62196-2 (type 2 plug). Compliance with all the information in these operating instructions is also part of the intended use. Any other use or use beyond this is considered misuse and can lead to dangerous situations. The user is liable for any damage caused by improper use.

SIGNS AND SYMBOLS

Please take note of the following symbols and words used in the operating instructions, on the product and on the packaging:

Information: Additional useful information about the product
Notice: This notice informs the user of possible damages of all kinds
Warning: Can result in serious injury or death
The product meets the conditions of the European Union.
Dispose of the unusable product in accordance with the legal requirements.
Type 2 adapter
Do not expose to direct sunlight!
Follow the operating instructions!

SAFETY INSTRUCTIONS

Carefully read the entire instruction manual before first operating product. It contains important information on handling the product. If you give the product to third parties, you must include this instruction manual.
Keep children away from the product and the packaging. The product is not a toy. Children should be supervised to ensure that they do not play with the product.
This product complies with protection class IP55 (plugged in).
Never touch the product with wet or damp hands.
Safe operation cannot be guaranteed if the product shows any kind of damage. If the product is damaged, it must be disposed of or repaired.
Do not repair the product yourself! Have repairs carried out by a professional electrician.
Never immerse the product in water or other liquids. Never grasp a unit connected to a power supply if it has fallen into water.
Failure to observe the safety instructions may result in damage to the unit or dangerous injury to persons!
This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge in handling the product. Such persons must first be instructed by a supervisor responsible for their safety or supervised during product operation!
Improper handling of the charging cable can cause explosions, electric shocks and short circuits. The generally applicable safety precautions and the instructions must be observed.
Before each use, check the charging cable and the contacts for damage and dirt.
Never charge with a damaged charging cable or damaged vehicle inlet. Never charge with contacts that have become dirty or damp.
Never pull off the plugs with force. Dangerous electric arcs can cause death or serious injury.
Only connect the charging cable to vehicle inlets and infrastructure charging sockets that are protected from water, direct sunlight, moisture and other liquids.
There are electric vehicles that allow the vehicle to be started with the charging cable plugged in. Always make sure to disconnect the charging cable before driving off.
Never use the charging cable with an extension cable or an adapter. Modifications or alterations are dangerous to life and lead to the immediate exclusion of the warranty.

TECHNICAL DATA

Rated voltage: 400V AC 50Hz
Rated power: 22kW
Vehicle plug: IEC62196-2 Typ 2 -lle
Infrastructure plug: IEC62196-2 Typ 2 -llb
No. of phases: 3-phase
Output: 32A
High voltage resistance: 2600V AC
Contact resistance: ≤0.3mΩ (L/N)
Isolation resistance: 500MΩ (1000V AC)
Resistor coding: 220Ω
Charge mode: IEC 62196-2, IEC 61851-1
Contact thermal rise: ≤50K
Protection type: IP55 (plugged in)
Working humidity: 5% – 95% non condensed
Withdrawal force: 45N / 80N
Flammability: UL94 V-0
Operating temperature: -25°C – +55°C
Pluging cycles: ≥10000x (no load)
Cable: 5×2,5mm² + 1×0,75mm²
Weight: 5m: 3,2 kg / 5,25m: kg

OPERATION

Observe the operating instructions for the charging station and the electric vehicle.

Switch off the vehicle. Go to parking mode.
Remove the protective caps from the charging plugs and connect the infrastructure charging plug to the infrastructure charging socket and the vehicle charging plug to the vehicle inlet. Ensure the correct assignment and check that the plug connections are correctly and completely plugged in.
Start the charging process at the charging station. The charging plugs are automatically locked.
To end the charging process prematurely, follow the operating instructions of the charging station.
After the charging process is finished, the charging plugs are automatically unlocked.
Disconnect the charging plugs from the charging station and the electric vehicle (EV must be unlocked).
Put the protective caps on the charging plugs and roll up the cable without kinks.

CHARGING TIME

The duration of the charging process depends on the capacity, the state of charge of the high-voltage battery of your vehicle and the permissible charging power of the charging cable. The charging current (max. 32A) is regulated by the EV. At very low and very high temperatures, the charging performance may be impaired.

CLEANING

Only clean the cable when it is not connected to the vehicle or the socket. Clean the charging cable and the dirty contacts only with a dry cloth. Never use harsh detergents, water or steam cleaners. Never immerse the item in liquids. Store the charging cable with the protective caps on in a dry and clean place.

DISPOSAL

At the end of its service life, dispose of the cable in keeping with all legal requirements. The dustbin symbol indicates that waste electrical and electronic equipment may not be disposed of with normal household waste within the EU. Please use local recycling and collection points or contact the retailer where you purchased the product. You thus fulfill your statutory obligations and contribute to protection of the environment.

DISCLAIMERS

The information contained in this instruction manual is subject to change without prior notice. ANSMANN assumes no liability for direct, indirect, accidental or other types of damage or consequential damage that result from improper handling of the product or failure to comply with the information contained in this instruction manual. We assume no liability and grant no warranty claims in cases of improper use of the product.

WARRANTY INFORMATION

We offer a two-year warranty on the product. Damages to the product due to failure to observe the instruction manual will void the warranty.
This does not affect your legal warranty right. You can find our warranty terms online at www.ansmann.de.