Kruger Matz KM0240FHD-V Smart TV Owner’s Manual

ITS YOUR LIFE
JUST TAKE IT
TV set
KM0240FHD-V (40’’)
KM0243FHD-V (43’’)
KM0255UHD-V (55’’)
KM0265UHD-V (65’’)
OWNER’S MANUAL

IMPORTANT SAFETY INFORMATION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates the presence of non-insulated, dangerous voltage.
This symbol indicates important operating and maintenance.
This symbol indicates that this equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

1. Read this manual carefully and keep it for future reference.

2.  Pay special attention to warnings marked with symbols presented above and make sure to follow information presented next to them.

3.  Do not use this device near water or other sources of moisture.

4. Do not block any ventilation openings. Install this device according to this manual.

5.  Do not install this device near heat sources such as radiators, stoves or other appliances that produce heat.

6. If the provided plug does not fit into your outlet, do not try to force it and consult an electrician for further advice.

7. Protect the power cord from being walked on or pinched, especially near plugs.

8.  Only use attachments and accessories provided/ specified by the manufacturer.

9. Unplug this device from outlet during storms, or when the device is not going to be used in a long time.

10.  Refer all servicing to qualified service personnel.
    Servicing is required when the device has been damaged in any way, for example if the power cord or plug is damages, liquid has been spilled or objects has been dropped on the device.

11.  Keep the device in a well ventilated area.

12.  Do not expose the batteries to excessive heat.

13.  Make sure that the voltage of the device and voltage in the outlet matches.

14.  Do not connect the device to a power strip with too many other electronic components.

15.  When unplugging the device, hold the main plug, not the wire.

16.  Remove the batteries from the remote if it not going to be used in a long time.

17.  Do not mix old and new batteries. Do not mix batteries of a different kind. Use consumer grade, non-rechargable  alkaline batteries.

18.  Place the TV on flat and stable surface.

19.  Always connect the device to a power outlet with protective ground connection.

20. To provide maximum stability, use the stands that are included in the box.

21.  Always place the device on stable surfaces that can support its weight.

22.  Always route the cables in a way, so that they cannot be tripped over, pulled or grabbed.

23. Do not press hard or put pressure on the LCD panel. It can cause the panel to brake, shatter or make permanent marks.

24.  If the panel does brake, do not make contact with the liquid in the panel. This can cause skin irritation. If the liquid gets on your skin, rinse the skin for 15 minutes. If the liquid gets in your mouth, immediately gargle and consult your doctor.

INSTALLATION

Mounting the stand

1. Place the TV with the front panel facing downwards.
   Make sure to place the front panel on soft cloth, soft pads or another soft piece of material.

2. Insert the stand into the holes located on the bottom of the TV (L for left, R for right).

3. Insert the screws into the sockets and tighten them.

Mounting on the wall
The TV has VESA mounting holes for wall mounting bracket (not included). Make sure that your bracket is the
compatible one with the TV. VESA standard determines the width and height of the mounting holes for the bracket.
Before mounting the TV on the wall:

• Follow all instructions from the wall mount manufacturer.
• If you have any doubts about your ability to safely install the TV on the wall, contact a professional.
• Make sure that the wall can support the weight of the TV and the mount.
• When installing the TV on the wall, do it with someone to help you.
•  Make sure that the TV has at least 20 cm clearance from each side.

BUTTONS ON THE TV

Note: the location, name and availability of the buttons may vary according to the TV model.

• Press and hold the button to turn on the TV.
•  Press the button to turn off the TV.

• SOURCE: opens the inputs menu.
• MENU: open the main menu.
• CH-: previous channel/option.
• CH+: next channel/option.
• VOL-: decrease volume.
• VOL+: increase volume.
•  POWER: turn on or off the TV.

SOCKETS

On the side

1. HDMI ports
2.  USB port
3.  CI socket
4.  Headphone jack output

On the bottom

1. Ethernet socket
2.  Optical audio output
3.  AV input
4. DVB-S antenna input
5.  DVB-T2/C antenna input

INSTALLING BATTERIES

1. Open the battery compartment by sliding it to the side.
2. Insert new batteries, according to the polarity.
3.  Close the battery compartment.

REMOTE CONTROL

1. Power: turn on or off the TV.
2. Input: open input source menu
3. Number keys
4. Guide: open EPG
5. CH. LIST: list of channels
6. Color buttons: additional functions
7. Menu: open on-screen menu
8. Play/pause
9. Arrow buttons: move within menus
10. OK: confirm entries
11. Back: go back to previous menu
12. Exit: exit the menu or app| 13. Vol -/+: adjust volume level
14. Home: smart functions
15. CH: switch channels
16. Mute: mutes the sound
17. Subtitle: turn on subtitles (if available)
18. Text: open Teletext
19. Info: shows information about the current program
20. Free: open the VIDAA Free app
21. Edit: open the edit menu
22. Streaming service apps
23. Browser: open web browser
24. Media: open devices menu
---|---

FIRST BOOTUP

1. Select the language and press the confirm button

2.  Connect to the internet:
   • If the Ethernet cable is connected to the TV, the setup wizard will automatically configure the connection.
   • If you have a wireless connection, the Wi-Fi networks will be displayed on the screen. Select your network and input password (if required).
   • Select which services do you agree to (only Privacy policy is required to proceed).

3. Select the main source of signal. Make sure that all of the cables are connected properly.

4. After selecting the TV option, the channel scanning screen will appear. Press the Start scanning button.

5. Select the antenna. Press the right button.

6.  Select if you want the analogue (ATV), digital (DTV) or both. Select the LCN option if you want to sort the channels with their logical name. Press the right button.

7.  Scanned channels will be saved. If there are no channels found, check the antenna connection. Press the Finish button.

CONNECTING TO THE INTERNET

Wired

1. Connect the RJ-45 cable to your router or other source of the internet.
2.  Connect the cable to the Ethernet socket on the TV.
3. The TV should automatically configure settings and connect to the internet. If there is a problem with connection, check the Network settings on the TV and/or check if your router is configured properly.

Wireless
Note: wireless connection is available on selected models.
Check the box that TV came in to make sure that your TV is equipped with the Wi-Fi.

1. Press the Home button and go to Settings menu.
2.  Go to the Network section and select Network  configuration.
3.  Change the Connection type to Wireless.
4.  Press the Refresh button and wait for your Wi-Fi network to appear.
5.  Select your network and input password.

Lechpol Electronics Leszek Sp.k. hereby declares that this TV set is consistent with directive 2014/53/EU. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl.
This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.
This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range (for 5 GHz product only).
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

http://www.krugermatz.com/
is a registered trademark

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>