AXOR One Select 140 48010XXX Washbasin Mixers Instruction Manual
- June 12, 2024
- AXOR
Table of Contents
- AXOR One Select 140 48010XXX Washbasin Mixers
- Product Information:
- SAFETY NOTES
- INSTALLATION INSTRUCTIONS
- SPECIAL INFORMATION FOR UK
- TECHNICAL DATA
- SYMBOL DESCRIPTION
- ADJUSTMENT
- MAINTENANCE
- DIMENSIONS
- FLOWDIAGRAM
- SPARE PARTS
- CLEANING
- OPERATION
- TEST CERTIFICATE
- ASSEMBLY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AXOR One Select 140 48010XXX Washbasin Mixers
Product Information:
The product is called A XOR One Select and it comes in three different models: A XOR One Select 140, A XOR One Select 170, and A XOR One Select 260. It is a device used for bathing, hygienic, and body cleaning purposes.
SAFETY NOTES
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The product may only be used for bathing, hygienic and body cleaning purposes.
- The hot and cold supplies must be of equal pressures.
INSTALLATION INSTRUCTIONS
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart (flow limiter) located behind the aerator can be removed.
SPECIAL INFORMATION FOR UK
If installing this product with a pump, please be aware that it has to have negative head switching. This product will not function with a positive head pump.
TECHNICAL DATA
This mixer series-produced with EcoSmart (flow limiter)
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
- Thermal disinfection: 70°C ⁄ 4 min
The product is exclusively designed for drinking water!
SYMBOL DESCRIPTION
Do not use silicone containing acetic acid!
ADJUSTMENT
To adjust the hot water limiter. Using a hot water limiter in combination with a continuous flow water heater is not recommended.
MAINTENANCE
The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
DIMENSIONS
FLOWDIAGRAM
SPARE PARTS
- XXX = Colors
- 000 = Chrome Plated
- 140 = Brushed Bronze
- 250 = Brushed Gold-Optic
- 300 = Polished Redgold
- 310 = Brushed Redgold
- 330 = Polished Black Chrome
- 340 = Brushed Black Chrome
- 670 = Matt Black
- 700 = Matt White
- 800 = Stainless Steel Optic
- 820 = Brushed Nickell
- 950 = Brushed Brass
- 990 = Polished Gold-Optic
CLEANING
OPERATION
Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
TEST CERTIFICATE
ASSEMBLY
A XOR / Hansgrohe SE Auestraße 59 77761 Schiltach Deutschland
[email protected]
axor-design.com
03 / 2023 9.08071.01