Rebel KOM1018 LED Desk Lamp User Manual

: June 12, 2024
: Rebel

Table of Contents

SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
OPERATION
SPECIFICATION
TECHNICAL DATA
Documents / Resources

LIGHT LED
DESK LAMP Rebel KOM1018 LED Desk Lamp USER MANUAL
model: KOM1018

SAFETY INSTRUCTIONS

Please read this operation instruction carefully before use, and keep it for future reference. Producer does not take responsibility for damages caused by inappropriate handling and use of the product.

Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
Do not use the device nearby open flames such as candles.
Do not place the device on an unstable surface.
Protect the device from shock.
Product for indoor use only. Do not use outside!
Do not use the device in places with poor ventilation.
Do not hang anything on the device.
Do not cover the device with clothes, paper or anything flammable.
Do not look directly at LED light beam! Risk of eye damage.
Device may heat up while working. Do not touch!
This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
Keep the device out of the reach of children.
Use only authorized accessories.
Prior to each use, inspect for any cracks or damage.
Do not use this device if it has been damaged.
Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
Always disconnect the device from the power mains before cleaning.
Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.

PRODUCT DESCRIPTION

Light source
LCD display
Control panel
AC input
Time settings / changing time display mode
Light power / color temperature adjustment
Timer settings
Power button / night light mode button

OPERATION

Switching on / off

Press power button to turn the lamp on.
Press and hold power button for about 2 seconds to turn on / off night light mode.

Time settings

Press and hold time settings button – edited time value will flash.
To change the selected value, press time setting button or timer button.
Press and hold time setting button to move to the second value setting.
To exit this mode, press and hold time setting button again.
Press time setting button to change time display mode

Timer

Press timer settings button to turn on timer.
Selected time value will be displayed on the screen. To switch between available time values, keep pressing timer settings button until desired option is displayed. Timer will start counting down after about 5 seconds after the desired time value is displayed.
Press and hold timer setting button for about 2 seconds to turn off timer.
After the set time has elapsed, an audible message will be triggered.

Temperature color and light power settings

To change light power, keep pressing light power button until the desired output is turned on.
To change the color temperature, press and hold the light power button for about 2 seconds. To switch between options, repeat this step.

SPECIFICATION

Touch buttons
3-step light intensity adjustment
3-step color temperature adjustment: cool, warm, natural Night lamp Timer function
Memory of last light intensity and color temperature setting Anti-slip feet

TECHNICAL DATA

Light source: 64 pcs SMD2835
Light source data:
Color temperature: 3000 K / 4000 K / 6500 K
Luminous flux: 430 lm / 820 lm / 420 lm
Power: 3,8 W / 7,2 W / 3,6 W
Lamp data:
Color temperature: 2800 K / 3600 K / 5600 K
Luminous flux: 250 lm / 530 lm / 160 lm
Power: 4,8 W / 9,1 W / 2,8 W
Operating temperature: 0°C – +45°C
Lifespan: up to 20 000 hours
AC adapter:
Input: 220 – 240 V; 50 / 60 Hz
Output: 12 V / 600 mA
In set: AC adapter
Weight: 900 g
Dimensions: 283 x 191 x 443 mm
LEARN MORE
For more information on this device visit: www.rebelelectro.com.
Read owner’s manual carefully before using your device.
Visit www.rebelelectro.com website for more products and accessories.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

www.rebelelectro.com