NEMO BLUC2101_21 Lux Ceiling Lamp Instruction Manual

: June 12, 2024
: NEMO

Table of Contents

Box contents
Installation
Example of connection (serial connection)
CAUTION
EQUIPMENT DISPOSAL
LIGHTING CLEANING SAFETY INSTRUCTIOS
Lamping
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEMO BLUC2101_21 Lux Ceiling Lamp

NEMO BLUC2101_21 Lux Ceiling Lamp

Box contents

Installation

To separate the spot into 3 parts.
Insert the frame inside the hole and secure it with screws
Cover the surrounding area with plaster to make the frame disappear into the ceiling
To connect driver (not included) to the main voltage.
Connect the fitting to the power supply only after connecting the Spot LED to the driver.
To connect driver to the spot.
Connect the fitting to the power supply only after connecting all LED to the driver
**Insert the body with four beads aiming at the slits

**

Example of connection (serial connection)

$Example of connection $serial connection$$

CAUTION

OUTDOOR LUMINAIRE

Installation should be carried out by a suitable qualified installer. / Disconnect main voltage before maintenance operation / All wiring and maintenance must be performed with the main switch in the OFF position / Don’t open the luminaire.

Connect the fitting to the power supply only after connecting all LED to the driver (when expected) / In case of failure, upon a return authorization of NEMO Studio, the product will be not neither open or dismounted and the cable must be cut leaving at least 10/15cm / Make the wiring using a system that guarantees at least the IP grade of the spot. / Se previsto, use only bulbs of suitable type and power specified in the label / Do not install fixture in environment with presence of chlorine, salt air or aggressive agents, if not expressly mentioned. / The color temperature (CCT) of LED sources can be different from the declared nominal value within a range of ±5%. / NEMO reserves the right to make any technical or formal alterations to its products without giving prior notice, especially for LED sources. / We recommend you to keep instructions for further consultations.

EQUIPMENT DISPOSAL

This lamp has been manufactured according to Directive EU 2012/19/EU. In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.

LIGHTING CLEANING SAFETY INSTRUCTIOS

It is essential to clean the luminaire periodically at regular intervals to remove the dust, dirt, limestone or other contaminations.

Before cleaning the luminaire, switch off the power supply and let it cool down. Not maintaining the luminaires may result in malfunctioning.

Clean the luminaires using a soft cloth damped in lukewarm water. Do not use cleaning products which contain acidic substances. Do not use cleaner machines. Luminaires must not be used in corrosive environments, exposure to corrosive substances must always be avoided. Do not use grainy detergent and/or rough or abrasive sponges.

Contact NEMO in case of doubts regarding lamp cleaning

Lamping

This luminaire contains built-in LED lamps.
The LED cannot be changed in the luminaire from the end-user. Please contact NEMO STUDIO (only authorized center).
This product contains a light source of energy efficiency class

Symbols