AXOR One 45713673 Basin Mixer Instructions

June 12, 2024
AXOR

AXOR One 45713673 Basin Mixer

AXOR-One-45713673-Basin-Mixer-product

Product Information

The product is the A XOR One, available in three different models: 45711XX3, 45712XX3, and 45713XX3. It is a bathing, hygienic, and body-cleaning device. The product is designed for use with drinking water only. It operates at a maximum pressure of 1 MPa and has a recommended operating pressure range of 0.1 – 0.5 MPa. The test pressure is 1.6 MPa. The hot and cold water supplies must have equal pressures. The product is equipped with safety features, including check valves and backflow preventers. It is important to ensure proper installation, adherence to plumbing codes, and regular maintenance to ensure safe and effective operation.

Product Usage Instructions

Safety Notes:

  • Wear gloves during installation to prevent crushing and cutting injuries.
  • The product should only be used for bathing, hygienic, and body cleaning purposes.
  • Children and adults with physical, mental, or sensory impairments must be supervised when using the product.
  • Do not use the product if under the influence of alcohol or drugs.

Installation Instructions:

  • Prior to installation, inspect the product for transport damages.
  • Install, flush, and test the pipes and fixture according to applicable standards.
  • Observe the plumbing codes of the respective country.

Maintenance:

  • Regularly check the check valves according to EN 806-5 and national/regional regulations (at least once a year).
  • To ensure smooth operation, occasionally turn the thermostat from total hot to total cold.

Adjustment:
After installation, check the output temperature of the thermostat. If the measured temperature differs from the set temperature, adjust it accordingly.

Dimensions:
Refer to page 43 of the user manual for detailed dimensions of the product.

Flow Diagram:
Refer to page 10 of the user manual for a flow diagram of the product.

Cleaning:
Refer to page 11 of the user manual for instructions on how to clean the product.

Operation:
Refer to page 08 of the user manual for instructions on how to operate the product.

Faults and Remedies:

  • If there is insufficient water, check the supply pressure and clean the regulator and shower filter seals if necessary.
  • If there is crossflow or backflow, check and clean the backflow preventers.
  • If the spout temperature does not correspond with the set temperature, adjust the thermostat.
  • If the hot water temperature is too low or temperature regulation is not possible, check for calcification in the thermo cartridge or issues with the instantaneous heater.
  • If there are dirty filters or a check valve that hasn’t moved back, clean or replace them as needed.
  • If the flow limiter in the hand shower is causing issues, remove it.

Assembly:
Refer to page 07 of the user manual for assembly instructions.

Models

AXOR-One-45713673-Basin-Mixer-fig- \(1\)

SAFETY NOTES

  • Gloves should be worn during installation to prevent crushing and cutting injuries.
  • The product may only be used for bathing, hygienic, and body cleaning purposes.
  • Children as well as adults with physical, mental, and/or sensoric impairments must not use this product without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this product.
  • The hot and cold supplies must be of equal pressure.

INSTALLATION INSTRUCTIONS

  • Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
  • The pipes and the fixture must be installed, flushed, and tested as per the applicable standards.
  • The plumbing codes applicable in the respective countries must be observed.

TECHNICAL DATA

  • Operating pressure: max. 1 MPa
  • Recommended operating pressure: 0,1 – 0,5 MPa
  • Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
  • Hot water temperature: max. 60°C
  • Thermal disinfection: 70°C ⁄ 4 min
    • Safety against backflow
    • The product is exclusively designed for drinking water!

Assembly

AXOR-One-45713673-Basin-Mixer-fig- \(2\)

Installation with #45770180 only
If rough 45710180 is installed in combination with shut-off rough 45770180, remove the plug from the rear of the function block before proceeding with the installation.

AXOR-One-45713673-Basin-Mixer-fig- \(4\) AXOR-
One-45713673-Basin-Mixer-fig- \(5\) AXOR-
One-45713673-Basin-Mixer-fig- \(6\) AXOR-
One-45713673-Basin-Mixer-fig- \(7\) AXOR-
One-45713673-Basin-Mixer-fig- \(8\) AXOR-
One-45713673-Basin-Mixer-fig- \(9\) AXOR-
One-45713673-Basin-Mixer-fig- \(10\) AXOR-
One-45713673-Basin-Mixer-fig- \(11\)

SYMBOL DESCRIPTION

  • Do not use silicone-containing acetic acid!

**ADJUSTMENT

**

After the installation, the output temperature of the thermostat must be checked. A correction is necessary if the temperature measured at the output differs from the temperature set on the thermostat.

AXOR-One-45713673-Basin-Mixer-fig- \(27\)

SAFETY FUNCTION

AXOR-One-45713673-Basin-Mixer-fig- \(19\)AXOR-
One-45713673-Basin-Mixer-fig- \(20\)

DIMENSION

AXOR-One-45713673-Basin-Mixer-fig- \(14\)

AXOR-One-45713673-Basin-Mixer-fig- \(15\)

FLOW DIAGRAM

AXOR-One-45713673-Basin-Mixer-fig- \(16\) AXOR-
One-45713673-Basin-Mixer-fig- \(17\)

MAINTENANCE

  • The check valves must be checked regularly according to EN 806-5 in accordance with national or regional regulations (at least once a year).
  • The mixer is equipped with check valves. To guarantee the smooth running of the thermostat, it is necessary from time to time to turn the thermostat from total hot to total cold.

AXOR-One-45713673-Basin-Mixer-fig- \(21\) AXOR-
One-45713673-Basin-Mixer-fig- \(22\)AXOR-
One-45713673-Basin-Mixer-fig- \(23\)

SPARE PARTS

  • XX = Colors
  • 00 = Chrome Plated
  • 67 = Matt Black

AXOR-One-45713673-Basin-Mixer-fig- \(24\) AXOR-
One-45713673-Basin-Mixer-fig- \(25\)

SPECIAL ACCESSORIES

  • Order as an extra
  • extension 25 mm #45790000

Cleaning recommendation, Warranty, Contact

AXOR-One-45713673-Basin-Mixer-fig- \(18\)

www.axor-design.com/cleaning-recommendation

OPERATION

AXOR-One-45713673-Basin-Mixer-fig- \(12\) AXOR-
One-45713673-Basin-Mixer-fig- \(13\)

Trubleshooting

FA U L T C AU S E RE M E D Y
⁄ Insufficient water Supply pressure inadequate ⁄ Check water pressure

(If a pump has been installed check to see if the pump is working).
 | ⁄| Regulator filter dirty| ⁄ Clean filter in front of the mixer and on the MTC-thermo car- tridge
 | ⁄| Shower filter seal dirty| ⁄ Clean filter seal between shower and hose
⁄ Crossflow, hot water being forced into cold water pipe, or vice versa, when mixer is closed| ⁄| Backflow preventers dirty or leaking| ⁄ Clean backflow preventers, exchange if necessary
⁄ Spout temperature does not correspond with temperature| ⁄| Thermostat has not been adjusted| ⁄ Adjust thermostat
set| ⁄| Hot water temperature too low| ⁄ Increase hot water temperature to 42 ºC to 60 ºC
⁄ Temperature regulation not possible| ⁄| thermo cartridge calcified| ⁄ Exchange thermo cartridge
⁄ Instantaneous heater didn’t work with thermostat| ⁄| Filters are dirty| ⁄ Clean the filter / exchange filter
 | ⁄| check valve hasn’t moved back| ⁄ Exchange check valves
 | ⁄| Flow limiter in handshower isn’t removed| ⁄ Remove flow limiter

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals