OLIGHT Obulb Pro S Multicolor Night Light Orb User Manual
- June 12, 2024
- OLIGHT
Table of Contents
USER MANUAL
Colorful and smart light orb.
IN THE BOX
Table 1: Light Orb
Table 2:
USB Magnetic charging cable
| Cable length | 0.5m |
|---|---|
| Input | USB-A 5V 1A |
| Output | CC&CV 4.2V±0.05V 1.0A |
| Time to fully charge | About 3 hours |
Figure 16
Auto sleep mode: If the connected Obulb Pro S is left without operation for 12
hours, it will enter sleep mode automatically and the APP will lose control of
it. To regain control, please wake up the Obulb Pro S with any button
operation or by charging it.
Restore factory light mode: When the Obulb Pro S is in the network setting
mode or is removed from the network, it will automatically clear the memorized
light mode and restore the factory light mode.
If the Obulb Pro S has not been connected within 3 minutes, it will exit the
network setting mode automatically. You can also exit the mode with any button
operation on the Obulb Pro S.
The APP cannot control the Obulb Pro S if its button is locked out. Please
unlock the button to enable control.
Multi-language dictionary, see Table 3;
1. Product specification, see Table 1 and Table 2;
2. Operating instructions as below：
2.1 Product appearance, see Figure 1;
2.2 Before first use, please charge the product to unlock it, see Figure 2;
2.3 Turn on/off, see Figure 3;
2.4 Lock/unlock, see Figure 4;
2.5 Turn on the low white light, see Figure 5;
2.6 Change modes, see Figure 6;
2.7 Change brightness, see Figure 7;
2.8 Application of adhesive metal badge, see Figure 8;
3. The APP operating instructions as below:
3.1 Download and install the APP, see Figure 9;
3.2 Add devices, see Figure 10;
3.3 Enter the network setting mode, see Figure 11;
3.4 Add devices successfully, see Figure 12;
3.5 White light/colored light control interface, see Figure 13;
3.6 Music rhythm interface, see Figure 14;
3.7 Planning/Interaction interface, see Figure 15;
3.8 Tips, see Figure 16.
Multi-language dictionary
Press
Double press
Exclusion clause
Olight is not liable for damages or injuries sustained resulting from the
usage of the product inconsistent with the warnings in the manual, including
but not limited to using the product inconsistent with the recommended lockout
mode.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
MEASURES:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC (IC) Radiation Exposure Statement:
This equipment complies with FCC (IC) radiation exposure limits set forth for an uncontrolled environment. The device can be used in portable exposure condition without restriction.
WARRANTY
WITHIN 30 DAYS OF PURCHASE: Contact the original seller for repair or
replacement.
WITHIN 2 YEARS OF PURCHASE: Contact Olight for repair or replacement.
This warranty does not cover normal wear and tear, modifications, misuse,
disintegrations, negligence, accidents, improper maintenance, or repair by
anyone other than an authorized retailer or Olight itself.
USA Customer Support
cs@olightstore.com
Global Customer Support
contact@olightworld.com
Visit www.olightworld.com to see our
complete product line of portable illumination tools.
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan
Town,
Dongguan City, Guangdong, China.
Made in China
THANK YOU!
Documents / Resources
|
OLIGHT Obulb Pro S Multicolor Night Light
Orb
[pdf] User Manual
Obulb Pro S, Multicolor Night Light Orb, Obulb Pro S Multicolor Night Light
Orb, Night Light Orb, Light Orb, Orb
---|---