SJE RHOMBUS Installer Friendly Series Single Phase Duplex Owner’s Manual

June 12, 2024
SJE RHOMBUS

INSTALLER FRIENDLY SERIES® (IFS)
SINGLE PHASE DUPLEX
Demand Dose or Timed Dose, Float or C-Level™ Sensor Controlled System for Pump Control and System MonitoringSJE RHOMBUS Installer Friendly Series
Single Phase Duplex

Installer Friendly Series®

Panel layout may vary with options.
Reg. Cdn Pat. & TM Off
C-Level™ Sensor US Patent No. 8,336,385; 8,567,242; 8,650,949
The Next Generation IFS duplex control panel utilizes an innovative circuit board design enclosed in a touch-safe housing to control two 120/208/240V single phase pumps in water and sewage applications. These newly redesigned IFS panels feature an easy-to use color LCD interface located on the inner door for programming and system monitoring. The panel configuration can be easily converted in the field to either a timed dose or demand dose through the LCD interface. Available with the EZconnex ® float system. The panel can easily be changed in the field to utilize either floats or the patented C-Level™ sensor for continuous level monitoring. The C-Level™ sensor senses the level in the tank and sends a signal to the panel. Pump activation levels can be adjusted by using the LCD interface. C-Level™ CL40 sensor operating range is 3-39.9 inches (7.6-101.3 cm). C-Level™ CL100 operating range is 3-99.5 inches (7.6-252.7 cm). The C-Level™ Sensor features a five year limited warranty.

LCD INTERFACE FEATURES

  • Full color graphics and menu navigation encoder for easy setup
  • Touch safe housing
  • Pump Hand/Off/Auto Control selectable via menu navigation
  • C-Level™ Sensor or Float operation selectable via menu navigation
  • Demand or Timed Dose operation selectable via menu navigation
  • Tank Level Indication and setpoint monitoring at-a-glance
  • Lead pump is easily identified by a graphic ring around the current lead pump regardless of control mode (timed dose or demand)
  • Displays remaining time in each active ON or OFF Timed Dose mode, as well as at-a-glance ON or OFF time elapsed graphic around lead pump
  • RJ45 communication connector
  • Flashing function for alarm beacon and horn (configurable)
  • Manual alarm reset (configurable)

COMPONENTS

  1. Enclosure measures 12 x 10 x 6 inches (30.48 x 24.4 x 15.24) NEMA 4X (ultraviolet stabilized thermoplastic, padlockable with integral mounting flanges, drip shield, heavy duty cover latches, and stainless steel ¼ turn set screw; for outdoor or indoor use)

  2. Red Alarm Beacon provides 360° visual check of alarm condition

  3. Circuit breakers provides pump power disconnect and branch circuit protection included as standard on all panels

  4. C-Level™ Sensor and float connection terminal blocks

  5. Controller Features:
    a. Incoming Control/Alarm Power terminal blocks
    b. Control/Alarm Power/System Status green LED indicators illuminate if control/alarm power is present and controller is operating
    c. Controller status green LED indicators for: Power/Active, Float Input Status, Pump Run, C-Level Active

    d. Normally open auxiliary alarm contacts included as standard
    e. Control Power On/Off switch
    f. Green LED Pump Run indicators illuminate when pump is called to run*
    g. Control panel able to operate if LCD interface fails or is disconnected
    h. Touch safe housing

  6. Alarm Horn provides audible warning of alarm condition (not shown)

  7. Exterior Alarm Test/Silence push button allows horn and light to be tested and horn to be silenced in an alarm condition; alarm automatically resets once alarm condition is cleared (not shown)

  8. Modbus Port (RJ45) for future expansion – eg. seal fail modules, remote monitoring, valve control, In-Site ® , logging, etc. (not shown)

*In fault condition, LED indicators will be red.
Note: Added options, voltage, and amp range selected may change enclosure size and enclosure features, and component layout.
Note: Schematic/Wiring Diagram and Pump Specification Label are located inside the panel.
INSTALLER FRIENDLY SERIES® SINGLE PHASE DUPLEX – Demand or timed dose float controlled system for pump control and system monitoring.

IFN 4 1 W 1 4 6A8AC10E

CONTROL
PANEL| MODEL
TYPE| ALARM
PACKAGE| ENCLOSURE
RATING| PUMP FULL
LOAD AMPS| PUMP
DISCONNECTS| FLOAT SWITCH
APPLICATION| OPTIONS (LISTED BELOW)
CONTROL PANEL| √| IFN| Single Phase Duplex (includes Options 6& 8AC and 10E as standard)| $1,599.00
---|---|---|---|---
MODEL TYPE
ALARM PACKAGE| √| 1| Alarm Package (includes test/normal/silence switch, fuse, red light, & horn)| Base
ENCLOSURE RATING| √| W| Weatherproof, NEMA 4X (engineered thermoplastic)| Base
STARTING DEVICE| √| 1| 120/208/240V| Base
| 0| 0 – 7 FLA| Base
PUMP FULL
LOAD AMPS| √| 1| 7-15  FLA| Base
| | 2| 15-20 FLA| $129.00
PUMP DISCONNECTS| it| 4| Circuit Breaker 120/208/240V| Base
| | H| Floats – Pump Down (select Option 17 below)
Tined dose : redundant off, timer enable, alarm / Demand dose : stop, start, alarm (all systems will ship with 3 floats by default)| Base
FLOAT SWITCH
APPLICATION| | E| EZconrlex° Float Switch System (select Option 33 or 35 below)| –$102.00
X| No Floats| -S102.00
| | C| C-Lever Sensor (select Option 24 or 29)
Select Option 3E and/or 4D for high water alarm and/or redundant off floats| –$102.00

PRICING WORKSHEET

IFS Duplex Base Price $1,599.00
Alarm Package———————————————-
Enclosure Rating——————————–
Starting Device——————————
Pump Full Load Amps—————————–
Pump Disconnects——————-
Float Switch Application—————————
Total Options—————————
TOTAL LIST PRICE————————————
NOTE: Pump down applications only. Industry practices suggest that a secondary device, such as a float switch, be used for redundant activation of the high level alarm and pump shut off when using the C-Level™ sensor.

| OPTIONS| DESCRIPTION| LIST PRICE
---|---|---|---
| 1J| Duo Alarm Inputs| $34.00
| 3E| High Water Alarm Float (must also select Option 17) Only Available with Float Switch Application = C| $34.00
| 4D| Redundant Off Float (must also select Option 17) Only Available with Float Switch Application = C| $34.00
✔| 6A| Auxiliary Alarm Contact, Form C included as standard)| $0.00
✔| 8AC| Display Board – Includes: ETM Counter, Events (Cycles) Counter, Alarm Counter, and Override Counter (Timed Dose Only) (included as standard)| $0.00
✔| 10E| Lockable Latch – NEMA 4X (included as standard)| $0.00
| 1 OF| Lightning Arrestor (must also select Option 15A)| $285.00
| 10K| Anti-condensation Heater (must also select Option 15A)| $124.00
| 11C| Additional NEMA 1 Remote Alarm Panel| $114.00
| 110| Additional NEMA 4X Remote Alarm Panel| $368.00
| 15A| Control/Alarm Circuit Breaker| $112.00
| 16A| 10′ Cord in Lieu of 20′ Cord (per Float)| –$3.00
| 16B| 15′ Cord in Lieu of 20′ Cord (per Float)| –$2.00
| 16C| 30′ Cord in Lieu of 20′ Cord (per Float)| $6.00
| 16D| 40′ Cord in Lieu of 20′ Cord (per Float)| $18.00
| OPTIONS| DESCRIPTION| LIST PRICE
---|---|---|---
| 17C| Sensor Float’ / Internally Weighted (per Float) – Mercury| $13.00
| 17D| Sensor Float’ / Externally Weighted (per Float) – Mercury| $15.00
| 17G| SJE MilliAmpMaster” / Pipe Clamp (per Float) – Mechanical| $0.00
| 17H| SJE MilliAmpMaster” / Externally Weighted (per Float)- Mechanical| $8.00
| 17J| Sensor Float’ / Pipe Clamp (per Float) – Mercury| $6.00
| 19 F| 4th Float for Timer Override or Lag
Only Available with Float Switch Application = H| $3,400
| 24E| C-Level” CIAO Sensor with 4′ Vent Tube and 20′ Cord| $349.00
| 24 F| C-Level” CL40 Sensor with 4′ Vent Tube and 40′ Cord| $384.00
| 24G| C-Level” CL40 Sensor with 8′ Vent Tube and 20′ Cord| $354.00
| 24H| C-Level” CIAO Sensor with 8′ Vent Tube and 40′ Cord| $390.00
| 24X| No C-Level” CL40 Sensor| $0.00
| 29A| C-Level” CL100 Sensor with 10′ Vent Tube and 20′ Cord| $359.00
| 29B| C-Level” CL100 Sensor with 10′ Vent Tube and 40′ Cord| $396.00
| 29X| No C-Level” CLIO° Sensor| $0.00
| 33D E| EZconnex’ 3-Port, 25′, with 10′ Floats (3) / Pipe Clamp| $313.00
| 33E 0| EZconnex’ 3-Port, 50′, with 10′ Floats (3) / Pipe Clamp| $355.00
| 33G /| EZconnex’ 3-Port, 25′, with 20′ Floats (3) / Pipe Clamp| $337.00
| 33H E| EZconnex’ 3-Port, 50′, with 20′ Floats (3) / Pipe Clamp| $379.00
| 35D E| EZconnex’ 4-Port, 25′, with 10′ Floats (4) / Pipe Clamp| $442.00
| 35E 0| EZconnex’ 4-Port, 50′, with 10′ Floats (4) / Pipe Clamp| $496.00
| 35G E| EZconnex’ 4-Port, 251 with 20′ Floats (4) / Pipe Clamp| $473.00
| 35H E| EZconnex’ 4-Port, 50′, with 20′ Floats (4) / Pipe Clamp| $526.00

EZconnex® mechanically-activated, narrow angle float switches with quick release connections California Prop 65 requires the following:
WARNING Cancer and Reproductive Harm – www.P65Warnings.ca.gov
B.14 www.sjerhombus.com • email: customer.service@sjeinc.com

9500054N-WEB Rev 01/23
© 2020 SJE, Inc. All Rights Reserved.
SJE Rhombus is a trademark of SJE, Inc.
www.sjerhombus.com • Toll Free 888-342-5753

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SJE RHOMBUS User Manuals

Related Manuals