SJE RHOMBUS 1009207 Tank Alert I Alarm System Owner’s Manual

: June 12, 2024
: SJE RHOMBUS

Table of Contents

1009207 Tank Alert I Alarm System
FEATURES
OPTIONS
CONTROL SWITCH OPTIONS
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TANK ALERT® I ALARM SYSTEM
Easy to Install Liquid Level Alarm System for Indoor Use

Indoor Alarms

1009207 Tank Alert I Alarm System

This alarm system monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications. The Tank Alert® I alarm system can serve as a high or low level alarm depending on the float switch model used. The alarm horn sounds when a potentially threatening liquid level condition occurs. The horn can be silenced, but the warning light remains on until the condition is remedied. A green “power on” light indicates power to the alarm panel.

FEATURES

NEMA 1 enclosure, designed for ease of installation, rated for indoor use
Red “alarm” light, green “power on” light, alarm “test” switch, and horn “silence” switch
Alarm horn sounds at 86 decibels at 10 feet (3 meters)
Can be used with any UL Listed / Recognized switching mechanism rated to include 1 amp, 12 VAC load
Alarm system (when installed on separate circuit) operates even if the pump circuit fails
Switching mechanism operates on low voltage and is isolated from the power line to reduce the possibility of shock

OPTIONS

When ordered with the alarm, this system is available with:

Alternate float switch models for high or low level warning
120 VAC primary voltage or 230 VAC primary voltage (230 VAC model is not UL Listed or CSA Certified)

TANK ALERT® I – Easy-to-install liquid level alarm system for indoor use.

Part #	Description (120V)	Shipping Weight	List Price
1007457	101-01 H (120 VAC w/15′ SJE Signal Masters High Level)	3.58 lbs

$204.00
1009207| 101-01 HSPKT (120 VAC w/15′ SJE Signal Masters High Level) with splice kit| 3.58 lbs.| $215.00
1003104| 101-01 H (120 VAC w/15′ Sensor Float° High Level)| 3.58 lbs.| $216.00
1003365| 101-01 L (120 VAC w/15′ Sensor Floats Low Level)| 3.58 lbs.| $216.00
1002235| 101-01X (120 VAC no float)| 2.14 lbs.| $147.00
Part #| Description (230V)| Shipping Weight| List Price
1008009| 101-02H (230 VAC w/15′ SJE Signal Masters High Level)| 3.58 lbs.| $284.00
1003364| 101-02H (230 VAC w/15′ Sensor Float° High Level)| 3.58 lbs.| $297.00
1005420| 101-02L (230 VAC w/15′ Sensor Floats Low Level)| 3.58 lbs.| $297.00
1005419| 101-02X (230 VAC no float)| 2.14 lbs.| $228.00

H = High Level L = Low Level X = No Float SPKT = Splice Kit MASTER CARTON holds 16 boxed units.

CONTROL SWITCH OPTIONS

The Tank Alert ® I alarm system comes standard with a 15 foot SJE Signal Master ® control switch with mounting clamp. Other float switches are available. See control switch section of the catalog. To determine the price of alarm with an alternate float, add the price of the part number with “no float” to the price of the float switch.

SPECIFICATIONS

VOLTAGE FOR 120 VAC MODEL:
PRIMARY: 120 VAC, 50/60 Hz, 5 watts max. (alarm condition)
SECONDARY: 12 VAC

VOLTAGE FOR 230 VAC MODEL (not UL Listed or CSA Certified):
PRIMARY: 230 VAC, 50/60 Hz, 5 watts max. (alarm condition)
SECONDARY: 12 VAC
ALARM ENCLOSURE: 6 x 4 x 2.5 inch (15.24 x 10.16 x 6.35 cm), NEMA 1 metal
ALARM HORN: 86 decibels at 10 feet (3 meters)
POWER CORD: 6 foot (1.8 meter)
FLOAT SWITCH CONNECTION TERMINAL: For float switch connection only. Do not apply power. (Voltage across terminals is 12 VAC.)
FLOAT SWITCH: SJE Signal Master® control switch with mounting clamp
CABLE: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)
FLOAT: 2.74 inch diameter x 4.83 inch long (7 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and non-potable water up to 140°F (60°C)
MAXIMUM WATER DEPTH: 30 feet (9 meters), 13 psi
ELECTRICAL: 5 amps, 125 VAC/250 VAC, 50/60 Hz