AOC G2 CQ32G2SE QHD Curved LCD Monitor display User Manual
- June 12, 2024
- AOC
Table of Contents
AOC G2 CQ32G2SE QHD Curved LCD Monitor
Safety
National Conventions
The following subsections describe the notational conventions used in this
document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and
printed in bold type or in italic type. These blocks are notes, cautions, and
warnings, and they are used as follows:
- NOTE: A NOTE indicates important information that helps you make better use of your computer system.
- CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
- WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon.
In such cases, the specific presentation of the warning is mandated by the regulatory authority.
Power
-
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
-
The monitor is equipped with a three-pronged grounded plug and a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
-
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the
monitor damage due to power surges. -
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
-
To ensure satisfactory operation, use the monitor only with UL-listed computers that have appropriate configured receptacles marked between 100-240V AC, Min. 5A.
-
The wall socket shall be installed near the equipment and shall be easily accessible.
Installation
- Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
- Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
- Do not place the front of the product on the floor.
- If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
- Leave some space around the monitor as shown below. Otherwise, air circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
- See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or on the stand:
Installed with stand
Cleaning
- Clean the cabinet regularly with a cloth. You can use soft detergent to wipe out the stain, instead of strong detergent which will cauterize the product cabinet.
- When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
- Please disconnect the power cord before cleaning the product.
Other
- If the product is emitting a strange smell, sound, or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
- Make sure that the ventilating openings are not blocked by a table or curtain.
- Do not engage the LCD monitor in severe vibration or high-impact conditions during operation.
- Do not knock or drop the monitor during operation or transportation.
Setup
Contents in Box
Not all signal cables will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Setup Stand & Base
Please set up or remove the base by following the steps below.
Adjusting Viewing Angle
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor’s angle.
You are able to adjust the monitor as below:
NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
- HDMI-2
- HDMI-1
- DisplayPort
- Earphone
- Power
Connect to PC
- Connect the power cord to the back of the display firmly.
- Turn off your computer and unplug its power cable.
- Connect the display signal cable to the video connector on the back of your computer.
- Plug the power cord of your computer and your display into a nearby outlet.
- Turn on your computer and display.
If your monitor displays an image, installation is complete. If it does not display an image, please refer to Troubleshooting. To protect equipment, always turn off the PC and LCD monitor before connecting.
Adaptive-Sync function
- Adaptive-Sync function is working with DP/HDMI
- Compatible Graphics Card: Recommend list is as below, also could be checked by visiting www.AMD.com
- Radeon™ RX Vega series
- Radeon™ RX 500 series
- Radeon™ RX 400 series
- Radeon™ R9/R7 300 series （R9 370/X, R7 370/X, R7 265 except）
- Radeon™ Pro Duo (2016)
- Radeon™ R9 Nano series
- Radeon™ R9 Fury series
- Radeon™ R9/R7 200 series (R9 270/X, R9 280/X except)
Adjusting
Hotkeys
| 1 | Source/Auto/Exit |
|---|---|
| 2 | Clear Vision/< |
| 3 | Volume/> |
| 4 | Menu/Enter |
| 5 | Power |
Menu/Enter
When there is no OSD, Press to display the OSD or confirm the selection.
Power
Press the Power button to turn on the monitor.
Volume
When there is no OSD, Press the> Volume button to activate the volume
adjustment bar, and Press < or > to adjust the volume.
Source/Auto/Exit
- When the OSD is closed, pressing the Source/Auto/Exit button will be the Source hot key function.
- When the OSD is closed, press the Source/Auto/Exit button continuously for about 2 seconds to auto-configure (Only for the models with D-Sub).
OSD Setting
Basic and simple instructions on the control keys.
- Press the MENU button to activate the OSD window.
- Press Left or Right to navigate through the functions. Once the desired function is highlighted, press the MENU button to activate it, and press Left or Right to navigate through the sub-menu functions. Once the desired function is highlighted, press the MENU button to activate it.
- Press Left to change the settings of the selected function. Press to exit. If you want to adjust any other function, repeat steps 2-3.
- OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on. To un-lock the OSD – press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on.
Notes:
- If the product has only one signal input, the item of “Input Select” is disabled to adjust.
- ECO modes (except Standard mode), DCR, DCB mode, and Picture Boost, for these four states that only one state can exist.
Luminance
Note: When “HDR Mode” is set to “non-off”, the items “Contrast”, “Brightness”, and “Gamma” cannot be adjusted.
Color Setup
Note: When “HDR Mode” under “Luminance” is set to “non-off”, all items under “Color Setup” cannot be adjusted
Picture Boost
Note:
Adjust the brightness, contrast, and position of the Bright Frame for a better
viewing experience.
When “HDR Mode” under “Luminance” is set to “non-off”, all items
under “Picture Boost” cannot be adjusted.
OSD Setup
Game Setting
Note:
- The function MBR and Overdrive Boost are available only when Adpative-Sync is off and the vertical frequency is up to 75 Hz.
- The screen brightness will be reduced when adjusting MBR or Over driver setting to Boost.
- When “HDR Mode” under “Luminance” is set to “non-off”, the items “GameMode”, “ShadowControl”, “GameColor”, and “LowBlueMode” cannot be adjusted.
Extra
Exit
LED Indicator
| Status | LED Color |
|---|---|
| Full Power Mode | White |
| Active-off Mode | Orange |
Troubleshoot
Specification
| Problem & Question | Possible Solutions |
|---|---|
| Power LED Is Not ON | Make sure the power button is ON and the Power Cord |
is properly connected to a grounded power outlet and to the monitor.
No images on the screen
| Is the power cord connected properly?
Check the power cord connection and power supply. Is the cable connected correctly?
(Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection.
- HDMI/DP input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.
If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
Can you see “Input Not Supported” on the screen?
You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle properly.
Make sure the AOC Monitor Drivers are installed.
Picture Is Fuzzy & Has Ghosting Shadowing Problem
| Adjust the Contrast and Brightness Controls. Press to auto adjust.
Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back.
Picture Bounces, Flickers Or Wave Pattern Appears In The Picture| Move electrical devices that may cause electrical interference as far away from the
monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution you are using.
Monitor Is Stuck In Active Off-
Mode”
| The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly fitted in its slot.
Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on the
keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED, GREEN, or BLUE)| Inspect the
monitor’s video cable and make sure that no pin is damaged. Make sure the
monitor’s video cable is properly connected to the computer.
Screen image is not centered or sized properly| Adjust H-Position and
V-Position or press hot-key (AUTO).
Picture has color defects (white does not look white)| Adjust RGB color
or select desired color temperature.
Horizontal or vertical disturbances on the screen
| ****
Use Windows 7/8/10 shut-down mode to adjust CLOCK and FOCUS. Press to auto- adjust.
Regulation & Service
| Please refer to Regulation & Service Information which is in the CD manual or www.aoc.com (to find the model you purchase in your country and to find Regulation & Service Information in Support page.
General Specification
Panel
| Model name| CQ32G2SE
---|---|---
Driving system| TFT Color LCD
Viewable Image Size| 80.0 cm diagonal
Pixel pitch| 0.2724mm(H) x 0.2724mm(V)
Video| HDMI lnterface & DP Interface
Separate Sync.| H/V TTL
Display Color| 16.7M Colors
Others
| Horizontal scan range| 30k-230kHz (HDMI)
30k-250kHz (DP)
Horizontal scan Size(Maximum)| 697.344mm
Vertical scan range| 48-144Hz (HDMI)
48-165Hz (DP)
Vertical Scan Size(Maximum)| 392.256mm
Optimal preset resolution| 2560×1440@60Hz
Max resolution| 2560×1440@144Hz (HDMI)
2560×1440@165Hz (DP)
Plug & Play| VESA DDC2B/CI
Input Connector| HDMIx2/DP
Output Connector| Earphone out
Power Source| 20Vdc, 4.5A
Power Consumption
| Typical(default brightness and contrast)| 55W
Max. (brightness = 100, contrast =100)| ≤77W
Power saving| ≤0.5W
Physical Characteristics| Connector Type| HDMI/DP/Earphone out
Signal Cable Type| Detachable
Environmental
| Temperature| Operating| 0°~ 40°
Non-Operating| -25°~ 55°
Humidity| Operating| 10% ~ 85% (non-condensing)
Non-Operating| 5% ~ 93% (non-condensing)
Altitude| Operating| 0~ 5000 m (0~ 16404ft )
Non-Operating| 0~ 12192m (0~ 40000ft )
Preset Display Modes
STANDARD| RESOLUTION| HORIZONTAL FREQUENCY(kHz)| VERTICAL
FREQUENCY(Hz)
---|---|---|---
VGA| 640×480@60Hz| 31.469| 59.940
VGA| 640×480@67Hz| 35.000| 66.667
VGA| 640×480@72Hz| 37.861| 72.809
VGA| 640×480@75Hz| 37.500| 75.00
SVGA| 800×600@56Hz| 35.156| 56.250
SVGA| 800×600@60Hz| 37.879| 60.317
SVGA| 800×600@72Hz| 48.077| 72.188
SVGA| 800×600@75Hz| 46.875| 75.000
SVGA| 832×624@75Hz| 49.725| 74.551
XGA| 1024×768@60Hz| 48.363| 60.004
XGA| 1024×768@70Hz| 56.476| 70.069
XGA| 1024×768@75Hz| 60.023| 75.029
SXGA| 1280×1024@75Hz| 79.976| 75.025
WXGA+| 1440×900@60Hz| 55.935| 59.887
FHD| 1920×1080@60Hz| 67.500| 60.000
QHD| 2560×1440@60Hz| 88.787| 59.951
QHD| 2560×1440@100Hz| 150.191| 99.946
QHD| 2560×1440@120Hz| 182.996| 119.998
QHD| 2560×1440@144Hz| 222.056| 143.952
QHD| 2560×1440@165Hz (DP)| 242.55| 165
Pin Assignments
Pin No.| Signal Name| Pin No.| Signal Name| Pin No.|
Signal Name
---|---|---|---|---|---
1.| TMDS Data 2+| 9.| TMDS Data 0-| 17.| DDC/CEC Ground
2.| TMDS Data 2 Shield| 10.| TMDS Clock +| 18.| +5V Power
3.| TMDS Data 2-| 11.| TMDS Clock Shield| 19.| Hot Plug Detect
4.| TMDS Data 1+| 12.| TMDS Clock-| |
5.| TMDS Data 1Shield| 13.| CEC| |
6.| TMDS Data 1-| 14.| Reserved (N.C. on device)| |
7.| TMDS Data 0+| 15.| SCL| |
8.| TMDS Data 0 Shield| 16.| SDA| |
20-Pin Color Display Signal Cable
| Pin No. | Signal Name | Pin No. | Signal Name |
|---|---|---|---|
| 1 | ML_Lane 3 (n) | 11 | GND |
| 2 | GND | 12 | ML_Lane 0 (p) |
| 3 | ML_Lane 3 (p) | 13 | CONFIG1 |
| 4 | ML_Lane 2 (n) | 14 | CONFIG2 |
| 5 | GND | 15 | AUX_CH(p) |
| 6 | ML_Lane 2 (p) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH(n) |
| 8 | GND | 18 | Hot Plug Detect |
| 9 | ML_Lane 1 (p) | 19 | Return DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
FAQ’s
What is the screen size of the AOC G2 CQ32G2SE QHD Curved LCD Monitor display?
The screen size of the AOC G2 CQ32G2SE is 32 inches.
What is the resolution of the AOC G2 CQ32G2SE QHD Curved LCD Monitor display?
The resolution of the AOC G2 CQ32G2SE is QHD (2560 x 1440 pixels).
Is the AOC G2 CQ32G2SE QHD Curved LCD Monitor display curved?
Yes, the AOC G2 CQ32G2SE display is curved for an immersive viewing experience.
What is the refresh rate of the AOC G2 CQ32G2SE QHD Curved LCD Monitor display?
The AOC G2 CQ32G2SE has a refresh rate of 165Hz, providing smooth and fluid visuals.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display support AMD FreeSync?
Yes, the AOC G2 CQ32G2SE supports AMD FreeSync technology, reducing screen tearing and stuttering during gameplay.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display have built-in speakers?
Yes, the AOC G2 CQ32G2SE features built-in speakers, allowing you to enjoy audio without the need for external speakers.
What is the response time of the AOC G2 CQ32G2SE QHD Curved LCD Monitor display?
The AOC G2 CQ32G2SE has a response time of 1ms MPRT (Moving Picture Response Time), which minimizes motion blur in fast-paced scenes.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display have multiple input ports?
Yes, the AOC G2 CQ32G2SE offers multiple input ports, including HDMI and DisplayPort, for connecting various devices.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display support VESA mounting?
Yes, the AOC G2 CQ32G2SE is VESA mount compatible, allowing you to mount it on compatible monitor stands or arms.
What is the color gamut coverage of the AOC G2 CQ32G2SE QHD Curved LCD Monitor display?
The AOC G2 CQ32G2SE has a color gamut coverage of 121% sRGB, providing vibrant and accurate colors.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display have adjustable stand options?
Yes, the AOC G2 CQ32G2SE offers adjustable tilt options to help you find a comfortable viewing angle.
Does the AOC G2 CQ32G2SE QHD Curved LCD Monitor display have HDR support?
No, the AOC G2 CQ32G2SE does not have HDR (High Dynamic Range) support.
Download this PDF Link:AOC G2 CQ32G2SE QHD Curved LCD Monitor Display User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>