fantec QB-Bracket 25 2.5 Inch Hard Drive Adapter Installation Guide
- June 12, 2024
- FANTEC
Table of Contents
fantec QB-Bracket 25 2.5 Inch Hard Drive Adapter Installation Guide
-
Hold the bracket “upside down” in both hands so that the SATA connector is pointing to the left.
-
Clamp the SSD at an angle of 45° between the two holding surfaces, with the SSD SATA connection to the left, pointing upwards.
-
slide the SSD in an inclined position to the right so that there is enough space for the SSD to be placed in the horizontal position without the SATA connector getting stuck.
-
Carefully align the SSD horizontally and carefully slide it to the left onto the SATA connector to the left.
-
Align four screw holes and tighten the SSD with the four screws.
www,fantec.de
www.fantecshop.de
Tel. +49 (0) 40 73 09 283
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>