fantec WK-200 Mini Keyboard Wireless User Manual
- June 9, 2024
- FANTEC
Table of Contents
— GERMANY • SINCE 1999 —
WK-200/ WK-300
Mini Keyboard Wireless
User Manual
OVERVIEW
Control your PC or other devices instead of a conventional USB keyboard with
this compact and handy 2.4 GHz wireless keyboard. The layout of the keyboard
is adapted to the German character set, so you can use „a”, ,,o”, „u” or other
typical characters without any problems. This compact and complete German
keyboard is the perfect solution for on the go, as well as at home with your
Smart N, your XBOX or an Android Smart TV Box. It extends the functionality of
your Smart TV remote control or XBOX by many additional functions. Or you
always have a complete German keyboard in your pocket.
TOUCHPAD
The function of a mouse wheel has been integrated into the touch pad. This
enables you to search websites more quickly.
PUT THE KEYBOARD INTO OPERATION
Open the cover on the back of the keyboard and remove the USB receiver.
Connect this receiver to the USB port on your PC, Nor Xbox. Then turn on the
keyboard using the switch on the top right corner by sliding the switch to the
left. The availability is signaled by illuminated LEDs.
AUTOMATIC SWITCH-OFF TO SAVE ENERGY
The keyboard automatically switches to standby mode after a while when not in
use. This saves energy. The keyboard wakes up from this standby mode by
pressing any key.
SWITCH OFF THE KEYBOARD AFTER USE
If you no longer need the keyboard, please switch the keyboard off completely.
To do this, slide the switch on
the top right edge to the right. If you do not want to use the keyboard for a
long time, we recommend putting the USB receiver back in the housing so that
you know for sure where the receiver of this keyboard is located.
CHARGE THE BATTERY
Use the supplied USB charging cable to charge the built-in lithium-ion
battery. A charger is not included. Use standard 5V USB chargers for charging.
Charge the device fully before using it for the first time. If the bat-tery is
too low, an LED flashes to indicate that charging is necessary. As soon as the
battery voltage gets too low, the keyboard switches off completely.
PRODUCT CARE
By opening the device or replacing the battery, the guarantee expires.
A battery will discharge if it has not been used for a long time.
Use 5V USB chargers, or charge The battery via a USB port on your PC.
Once the battery is charged, disconnect the charging cable. Overcharging
shortens the life of the battery.
Clean the device carefully with just a sligthly damp cloth.
Do not add any cleanser for cleaning.
TECHNICAL SPECIFICATIONS
Measurement 146,8mm x 97,5mm x 19mm (L x W x H):
Weight: 110 g
Range: 10m
Working voltage: 3,3 V
Operating current: < 50 mA
Charging current:: < 300 mA
Current drain standby: < 1 mA
TROUBLESHOOTING
| PROBLEM | SOLUTION |
|---|---|
| Keyboard does not work | 1. Charge the battery for at least 15 minutes. |
2. Slide the switch to the left.
Keyboard does not connect to the receiver| 1. Pull the receiver out of the
USB port and put it back in.
The cursor moves irregulary or does not move at all| 1. Reduce the distance
between the keyboard and the receiver.
2. Fully charge the battery.
3. Clean the touchpad carefully with just a slightly damp cloth.
The battery does not charge| 1. Check the cable connection to the charger.
2. Please contact our service.
SPECIAL SHORTCUTS
| SHORTCUT | FUNCTION | NOTE |
|---|---|---|
| FN + RF | Matching with the receiver (pairing) | Matching takes place in the |
factory
| Touchpad turn on/off| The touchpad is switched on ex factory
| Pace of the cursor| Cursor pace can
be set in three stages
NOTES
FANTEC GmbH – Hamburg/Gerrnany • made in China
Typing errors, errors and modifications are subjects to change.
PRODUCT OVERVIEW
