boAt Nirvana 525 ANC Wireless Earphone User Manual

boAt Nirvana 525 ANC Wireless Earphone User Manual

Packaging Contents:

• 1 x boAt Nirvana 525ANC
• 1 x USB Type C charging cable
• 2 x Additional Earmuffs
• 1 x Manual
• 1 x Warranty Card

Product Overview

Power Out Long press the MFB (Multifunction Button) for 3 seconds. The blue and red LEDs start flashing alternatively after the initial blue LED flash for a second.
Power OM Long press the MFB for 5 seconds. Red LED blinks once to indicate the device getting switched off.

Bluetooth Connectivity

• Turn on the Bluetooth functionality on your phone and turn on NIRVANA 525ANC by long pressing the MFB for 3 seconds that takes the neckband into pairing mode
• The neckband’s indicator starts blinking in blue and red alternatively to indicate that the earphones have gone into pairing mode.
• Then, select ‘NIRVANA 525ANC’ from the list of available devices after search. • If asked for a passkey, confirm the passkey ‘0000’ on phone. • Once confirmed, the neckband and phone get connected via Bluetooth indicated by a tone prompt and slowlyflashing blue LED.

Note: If there’s a connection history between the phone and the neckband, then they automatically got reconnected In a working range whenever the neckband gets switched on while the phone’s Bluetooth mode is turned on.

To Charge

• Connect one end of the provided cable to the USB Type C port on the headset and the other end to a wall adapter or laptop • While charging, the indicator LED turns into steady red • Once the neckband gets fully charged, the indicator turns into solid blue
  Note:

• Use only authorized/company chargers for the headset as unauthorized ones may damage the same & invalidate the warranty on the headset as well • The earphones can’t be utilized for the purpose of listening while it is in charging mode
  ANC & Ambient Modes
  -Short press the ANC button once to active Ambient Mode which boosts audible transparency towards the surroundings. You can be mindful of your ambience even while the music stays on. -Short press the ANC button once to activate Active Noise Cancellation mode. It cuts out the background noise up to •42db so that you can be in the zone and enjoy your playlists. -Short press the ANC button again, to switch to the standard. non-ANC mode.
  The cycle of operation: Standard Mode (default) -> Ambient Mode -> ANC Mode.

Dolby Audio & boAt Signature Sound

Long press the ANC button for 3 seconds to switch between Dolby mode and boAt Signature Sound mode. By default, Dolby mode stays active.
boAt Adaptive Ea
You can enable Adaptive BO via the boAt Hearables
Dual Pairing To connect NIRVANA 525ANC to two devices simultaneously, firstly connect the earphone to one of the devices. Then. switch both the earphone and the device’s Bluetooth off. Thereafter, connect the earphone to the second device, and again switch the first device’s Bluetooth on. The earphone gots connected to both devices. If not connect the first device manually once again to activate dual pairing.
Ai ENx'” Tech
Our ENx’ tech algorithm powered by Artificial Intelligence cancels out the background noise real-time, so that you can be heard crystal clear via voice calls. One need not activate Ai ENx'” as the mie is equipped with the same and activated by default.
Deliver your yoke without interruptions anywhere – traffic, railway stations, airports, workspace; literally anywhere!

Other Functions

If there’s no connection established when the Bluetooth is switched on, then the device powers off automatically after a while If you receive an incoming call during playing music, the music automatically disconnects. When the call is done and disconnected, the music starts to play automatically from where it left. If you receive or enter a call, ANC modes and Dolby Mode gets deactivated automatically and turns back on when the call ends. You can still enter ANC mode and Dolby Mode if you wish to, but the playtime will be impacted drastically.
ANOMALIES & Solutions
A. Mobile can’t search the headset.
– Check if the Bluetooth headset is powered on or off (When powered on and in pairing mode, the LEDs blink with red and blue colours alternatively)
– If it is powered on and the device still can’t connect, then please reboot the Bluetooth device and the phone
B. After connecting the headset with the phone, disconnection or noise occurs
– Thls may be due to the low power of the headset. Please charge the Bluetooth headset

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>