COSTWAY TY 326361 Folding Slide User Manual
- June 12, 2024
- COSTWAY
Table of Contents
COSTWAY TY 326361 Folding Slide
Product Information
- Product Name: COSTWAY Folding Slide with Basketball
- Model Number: TY 326361
- Manufacturer: COSTWAY
- Product Type: Kinderutsche (Slide) with Basketball
- Product Features: Folding design, includes basketball hoop
Product Usage Instructions:
-
Start by assembling the product. Follow the instructions in the user manual for product assembly. Make sure to refer to the appropriate language section (EN, DE, FR, ES) for clear instructions.
-
Once the product is assembled, ensure that it is placed on a flat and stable surface, preferably on a soft ground for safety.
-
Before allowing children to use the slide, inspect it for any damage or loose parts. Ensure that it is in good condition and all parts are securely attached.
-
To use the slide, instruct children to climb up the ladder or steps provided on the slide. Make sure they hold onto the handrails for stability.
-
Once at the top of the slide, children should sit down and position themselves properly before sliding down.
-
Children should slide down one at a time and avoid pushing or crowding on the slide to prevent accidents.
-
When using the slide with the basketball feature, ensure that children take turns using the hoop. They can either slide down first and then shoot the ball or vice versa.
-
Always supervise children while they are using the slide to ensure their safety. Monitor their actions and make sure they follow the usage instructions.
-
After use, encourage children to climb down the ladder or steps safely and avoid jumping off the slide.
-
When not in use, it is recommended to fold and store the slide in a safe and dry place to prolong its lifespan.
Note: If you encounter any issues with the product or have further questions, refer to the user manual or contact the manufacturer’s customer support for assistance.
PRODUCT ASSEMBLY
-
Put Slide(1) to the hole of Pane1(3).
-
Snap to the correct position along the track.
-
Pane1(2) is same install to Pane1(3).
-
Put Short Peda1(5) of the hole between Pane1(2) and Panel(3).
-
Put long Peda1(4) to the bottom hole of Panel (2)and Panel (3).
-
Basketball Net(7) to Basketball Ring(6),then put on Panel(2) hole. screwed with Nut(7).
-
The installation is complete.
-
Insert the slider (1) into the hole in the panel (3).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>