CODELOCKS KL1000 Classic KitLock Locker Lock Instructions

: June 12, 2024
: CODELOCKS

Codelocks Support
KL1000 Classic Programming and Operating Instructions

KL1000 Classic KitLock Locker Lock

CODES – THE BASICS
The KitLock has four code levels available:

a. Master Code
b. Sub-Master Code
c. User Code
d. Technician Code

The KitLock is supplied with two factory set codes:
Master Code: 11335577
User Code: 2244

When fitted, immediately change the Master Code and User Code.
All Master Codes and Sub-Master codes are 8 digits long.
All User Codes are 4 digits long.
All Technician Codes are 6 digits long.
The lock `open’ time is set at 4 seconds.

FUNCTIONS

Before programming, select the most appropriate function for the application

A) PRIVATE USE
Important Note: This is the default function and is already pre-programmed in new locks. This is the most common function and is used where the same code will be repeated used.

B) PUBLIC USE
The user enters their own personal 4 digit code. This locks the lock. The same code is entered once only to open the lock before being erased and ready for the next new user. This function is used for short term, multi occupancy applications, e.g. a locker in a leisure centre.

OPERATING INSTRUCTIONS

Note: The KitLock has a 10 button keypad and a # button. The # button is hidden beneath the handle when in the locked position.
CODES – The lock has the following code levels:

MASTER CODE
The Master Code can:

Open the lock
Change the Master Code
Set / Change / Delete the Sub-Master and User Code
Select between Private and Public Functions Activate / Deactivate Technician Code

SUB-MASTER CODE
The Sub-Master Code can:

Open the lock
Change the Sub-Master Code
Set / Change / Delete the User Code

USER CODE The
User Code can:

Open the lock
Change the User Code

TECHNICIAN CODE
The Technician Code can:

Open the lock

A code cannot be programmed into more than one level.

LOST CODE PROCEDURE
Note: The procedure requires the door to be open.

Remove the rear-fixing bolt and swing the lock over the edge of the door to reveal the battery compartment.
Remove one battery.
Press and hold the 1 button, replace the battery, the Blue LED will flash twice, release the 1 button. Within three seconds press the 1 button three times. The Blue LED will flash twice and the lock will have reverted to the factory Master Code 11335577 and all other stored settings will be erased.

PENALTY TIME

Entering three incorrect codes will cause the lock to shutdown for 10 seconds.

BATTERY POWER

The KitLock should provide well in excess of 15,000 openings, of 4 seconds each, from 2 x AAA 1.5v cells.

LOW BATTERY

When the battery power is low the
- Red LED will flash 3 times before the
- Blue LED lights, accepting the code. Fit new batteries as soon as this happens. The lock will operate for 100 times with low battery.

BATTERY FAILURE OVERRIDE
The KitLock has been designed so an external PP3 battery can be placed against the contact points surrounding the Blue and Red LED’s so the lock can be opened to replace the batteries should they fail. The procedure is as follows:

Place the contact points of the PP3 battery against the contact points surrounding the Blue and Red LED’s.
The positive + PP3 terminal against the Red LED and the negative – PP3 terminal against the Blue LED.
Enter the Master Code.
The motor will withdraw the locking pin allowing the lock to be opened.
Fit new batteries by removing the upper fixing bolt and swinging the lock down over the edge of the door. Refit the lock.

PROGRAMMING

To program – the lock must be in the open position with the # button visible. Every program command must commence by pressing the # button, followed by other the Master Code, Sub-Master Code or User Code.

MASTER CODE COMMANDS CHANGE THE MASTER CODE

Master Code · 01 · New Master Code · New Master Code ··

Example: #11335577 · 01 · 12345678 · 12345678 ··
Result: Master Code has been changed to 12345678.

SET OR CHANGE THE USER CODE

Master Code · 02 · User Code ··

Example: #11335577 · 02 · 9999 ··
Result: New User Code 9999 now operative.

DELETE THE USER CODE

Master Code · 03 ··

Example: #11335577 · 03 ··
Result: User Code deleted.

SET OR CHANGE THE SUB-MASTER CODE

Master Code · 04 · Sub-Master Code · Sub-Master Code ··

Example: #11335577 · 04 · 87654321 · 87654321 ··
Result: Sub-Master Code 87654321 now operative.

DELETE THE SUB-MASTER CODE

Master Code · 05 · 05 ··

Example: #11335577 · 05 · 05 ··
Result: Sub-Master Code deleted.

BATTERY LEVEL CHECK

Master Code · 09 ··

Example: #11335577 · 09 ··
Result: Both · Red LED and · Blue LED will flash to indicate current battery status:
More than 80% charged
Between 50%-80% charged
Between 20-50% charged
Less than 20% charged

CODELOCKS KL1000 Classic KitLock Locker Lock -
PROGRAMMING

SUB-MASTER CODE COMMANDS CHANGE THE SUB-MASTER CODE

Sub-Master Code · 06 · New Sub-Master Code · New Sub-Master Code ··

Example: #87654321 · 06 · 10101010 · 10101010 ··
Result: Sub-Master Code has been changed to 10101010.

SET OR CHANGE THE USER CODE

Sub-Master Code · 07 · User Code ··

Example: #87654321 · 07 · 6666 ··
Result: New User Code 6666 now operative.

DELETE THE USER CODE

Sub-Master Code · 08 ··

Example: #87654321 · 08 ··
Result: User Code deleted.

USER CODE COMMANDS CHANGE THE USER CODE

User Code · New User Code · New User Code ··

Example: #2244 · 6688 · 6688 ··
Result: New User Code 6688 now operative.

SPECIAL MASTER CODE COMMANDS
SET A) PRIVATE USE

Master Code · 26 ··

Example: #11335577 · 26 ··
Result: The lock will revert back to default A) Private Use Function. Factory set User Code 2244 will now work repeatedly until reprogrammed.

SET B) PUBLIC USE – SINGLE CODE ENTRY (DEFAULT)

Master Code · 24 ··

Example: #11335577 · 24 ··
Result: The lock will now remain open until the next user enters their own personal code into the lock as follows:
Step 1 – Enter 4 digit code · Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code · The lock will now open and remain open until next 4 digit code is entered.

SET B) PUBLIC USE – DOUBLE CODE ENTRY

Master Code · 22 ··

Example: #11335577 · 22 ··
Result: The lock will now remain open until the next user enters their own personal code into the lock as follows:
Step 1 – Enter 4 digit code · Repeat 4 digit code ·· Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code · The lock will now open and remain open until next 4 digit code is entered as Step 1.
Note: When locked in this mode the · Red LED will flash every 5 seconds to indicate the locker is locked.

SET TECHNICIAN CODE

Master Code · 99 · Technician Code · Technician Code ··

Example: #11335577 · 99 · 555555 · 555555 ··
Result: The lock is automatically set into B) Public Use Function and allows the programmed Technician Code to open the lock WITHOUT the entered single User Code being erased.
Note: If the lock is opened with a Master Code the User Code will be erased.
POI_KL1000EU_v1:1017

https://codelocks.zohodesk.eu/portal/en/kb/articles/kl1000-2017-programming- and-operating-instructions