LOKIISKI V8 3 In 1 Wireless Magnetic Charger User Manual

LOKIISKI V8 3 In 1 Wireless Magnetic Charger User Manual

Introduction

3 IN 1 Wireless Magnetic Charger
Model: V8

For iWatch
| For iPhone
| For Air Pods

---|---|---
| |

Product Structure

Also Con Be Folded into a Triangle for Use

• 3- IN-1 Wireless Charging
• Powerful Magnetic Attraction
• Fashion Exterior Design

Indicator

1. Metal or Abnormal Temperature Defected
2. Using a non— Quick Charge Adapter

| Flash

Package Includes

• 3 IN 1 Foldable Wireless Charger ” 1
• Portable Travel Case * 1
• 20W PD 3.0 Adapter ” 1
• Type—C Cable * 1
• User Manual * 1

Specification

Wireless Charging Output
(Mobile Phone)| 15W/10W/7.5W/5W
Wireless Charging Output
(Earphone)| 3W
Wireless Charging Output
(Watch)| 2.5W
Material| Fabric +PU+ ABS+PC
Data Cable| Type— C
Cable Length| 3.3ft
Color| Black
Relevant Certification| CE/FCC/ROHS

Protection

• Over-heat Protection
• Over-current Protection
• Over-voltage Protection
• FOD

Attention

1. Please keep the charger away from water or other liquids.

2. Do not place the charger too close to any magnetic stripe or clip card (ID cord, bank cords, etc. ) to avoid magnetic failure.

3. This item is forbidden to be used on any mobile device with metal plates, as it will cause extreme heat that may burn and /or damage the device.

4. Fast charge via the plug and USB charging coble (both support QC or PD).

5. We recommend using the iPhone 12/13/14 series mobile phone for bore metal charging or using the original iPhone Mag safe magnetic case to charge the iPhone 12/13/14 series mobile phone.
   Wearing other ordinary mobile phone cases may cases the mobile phone to slide down and damage the phone.
   It is not recommended to charge phones other than the iPhone 12/13/14 series because this product is not compatible with other models.

6. The standard temperature of wireless charger qi is 130°F, but the temperature of our products should be controlled within 113°F.
   The charger will cut off current when abnormal heating occurs.
   Please contact us if any damage occurs.

7. We recommend that you turn off the power-consumption software before charging to effectively prevent the phone from overheating.
   When the temperature exceeds 113°F during charging, it is normal for the charging speed to slow down.

Note

• Only Bare metal ( iPhone 12/13/14 series) and iPhone Mag safe phone cases con De attracted magnetically.
• For a fast and safe charge, using a Quick Charge 2.0/3.0 or PD 2.0/3.0 Wall Charger is highly recommended.

365-Days Hassle-Free Warranty

It’s our honor that you have chosen Ascosk! We promise to provide the best product and service!
If you have any questions about the product, if you are not satisfied with it, please reach us for a solution.
EMAIL: support@lokiiski.com

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>