JC-HICI JC-EK0401HB 4×1 HDMI 2.0 KVM Switch User Manual

JC-HICI JC-EK0401HB 4×1 HDMI 2.0 KVM Switch

Product Information

Product Name: 4X1 HDMI USB2.0 SWITCH 4K@60Hz
Description: This product is a 4×1 HDMI USB2.0 switch that supports 4K resolution at 60Hz. It allows you to connect multiple HDMI devices to a single display and switch between them easily.

Main Features:

• Supports 4Kx2K@60Hz resolution
• Supports 3D
• USB 2.0 connectivity
• HDCP 2.2 and HDMI 2.0 compatibility
• Hot plug and play support
• Keyboard and mouse control
• RS232 control
• Hot key switch

Advantage: This product offers high-resolution video output, support for 3D content, easy connectivity through USB 2.0, and compatibility with various operating systems.

Product Usage Instructions

Packing List

• 1 * 4×1 HDMI KVM Switch
• 1 * DC to USB Cable
• 4 * USB Cable (A to B)
• 1 * User Manual

Specifications

Protocol: HDMI 2.0; HDCP 2.2
HDMI Data Rate: 18Gbps
Video Resolution: Up to 3840×2160@60Hz 4:4:4
HDMI Port: HDMI-A x 4
HDMI Cable Length: Less than 5 meters at 1080p@60Hz
RS232 Connector: 3 pin connector
RS232 Baud Rate: 115200bps
RS232 Data Bit: 8
USB Connector: USB2.0 PC1/2/3/4
USB Ports: USB2.0 x2 (type A), USB-B x4
Supported Operating Systems: Unix/Windows/Debian/Ubuntu/Fedora/Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux based systems
Power Adapter: DC 5V
ESD Protection: Yes
Temperature: Operating: 5°C ~ 40°C, Storage: -20°C ~ 60°C
Humidity: Operating: 5% ~ 90%, Storage: 5% ~ 95%
Product Dimension: 225(L) x 67(W) x 22(H) mm
Warranty: 1 year

Switch Mode Description

Button Switch:
Press the panel buttons to switch between connected devices.

Mouse Switch:
Press and hold the middle mouse button, then press the left button to switch to the previous HDMI video signal source. Press and hold the middle mouse button, then press the right button to switch to the next HDMI video signal source.

Timed Loop Switch:
Double-click the [Scroll] key, then press the [S] key, and finally press a number key (5-999) to set the interval for automatically switching to the next signal source. For example, double-click the scroll key, press the S key, and then press the number 5 to indicate an interval of five seconds before switching.

Hotkey Setting
Note: USB2.0 port does not support hotkey function.

Scroll Mode Hotkeys:

• [Scroll] ++ [Scroll] + [1/2/3/4]: Switch to PC1/PC2/PC3/PC4
• [Scroll] ++ [Scroll] + [or]: Switch to the next PC
• [Scroll] ++ [Scroll] + [or]: Switch to the previous PC
• [Scroll] ++ [Scroll] + [ESC]: Turn on/off the polling switching function (default interval: 5 seconds)
• [Scroll] ++ [Scroll] + [T]: Set the polling switching time interval (valid range: 5-999 seconds)
• [Scroll] ++ [Scroll] + [Caps]: Switch to Caps hotkey mode
• [Scroll] ++ [Scroll] + [Num]: Switch to Num hotkey mode
• [Scroll] ++ [Scroll] + [left/right Ctrl]: Switch to Ctrl+Shift hotkey mode

Caps Mode Hotkeys:

• [Caps] ++ [Caps] + [1/2/3/4]: Switch to PC1/PC2/PC3/PC4
• [Caps] ++ [Caps] + [or]: Switch to the next PC
• [Caps] ++ [Caps] + [or]: Switch to the previous PC
• [Caps] ++ [Caps] + [ESC]: Turn on/off the polling switching function (default interval: 5 seconds)
• [Caps] ++ [Caps] + [T]: Set the polling switching time interval (valid range: 5-999 seconds)
• [Caps] ++ [Caps] + [Scroll]: Switch to [Scroll]++[Scroll] hotkey mode
• [Caps] ++ [Caps] + [Num]: Switch to [Num]++[Num] hotkey mode
• [Caps] ++ [Caps] + [Ctrl]: Switch to [Ctrl]+[Shift] hotkey mode

4X1 HDMI USB2.0 SWITCH4K@60Hz

Description

This 4×1 HDMI2.0 KVM Switch provides you with great flexibility in integrating cross-platformcomputerequipment easily. It makes you available to switch easily and reliably between any HDMI computers using one HDMI-compliant display. The 4×1 HDMI2.0 KVM Switcher not only have 2 USB 2.0 port but also have key board and mouse report. While using the mouse and keyboard control, USB 2.0 can also be connected to Udisk and hubat the same time.By using USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode scanner or other USB devices to the KVM. Switching can be controlled through variable methods, such as the front panel source selector buttons, RS232 and hot keys on the keyboard.

Main Features

• Using only 1 set of keyboard, mouse and monitor to control 4 computer devices
• Support hot key commands and mouse gesture to switch inputs
• Support RS232 command to switch inputs
• Available to use keyboard without any delay after switch input sources
• Support resolution up to 3840*2160@60Hz 4:4:4
• Compliant with and HDCP 2.2, HDMI2.0
• Support USB 2.0 for printers, USB drives etc
• Support front panel buttons,RS232, keyboard hot keys to control KVM switch.  Support Unix/Windows/Debian/Ubuntu/Fedora /Mac OS X/Raspbian/Ubuntu for RaspberryPi andother Linux based system.  Support hot plug, connect or disconnect devices to the KVM switch in any time and without turnoffdevices
• Support HDR 10 and Dolby Vision

Advantage

Packing List

• 1 * 4×1 HDMI KVM Switch
• 1 * DC to USB Cable
• 4 * USB Cable(A to B)
• 1 * User Manual

Specification

Switch mode description

1. Button switch:
   Press the panel buttons to switch the devices.

2. Mouse switch:

3. Press the middle mouse button and do not release it ,then press the left button: Switchingto the previous HDMI video signal source.

4. Press the middle mouse button and do not release it ,then press the right button: Switching to the next HDMI video signal source.

5. Timed loop switch:
   Double-click the [Scroll] + click [S]+ click the number key（5-999s）For example, double-click the scroll key and then press the S key and then pressthenumber 5 to indicate: the interval of five seconds to automatically switch to thenext signal
   source.

Hotkey Setting

USB2.0 port not support hotkey function.

Notice：

• [*1]: “++” means press 2 times in quick succession, [Scroll] ++ [Scroll] + [1] implies press the Scroll key twice in quick succession, then pressing the number “1” again, the detection timeout between each hotkey code is 2 seconds, if the Scroll key is pressed for the first time, then press the Scroll key after more than 2 seconds, this hotkey combination will be invalid.
• [*2]: “n” can be 1/2/3 numbers, “Scroll ++ Scroll + S + 1 + 2 + 0” means to press the “Scroll” key twice in quick succession, and then press the number “S” and release it, press the number “1” key and release it, then press the number “2” key and release it, and then press the number “0” key and release it, that means set the polling time interval to 120 seconds.
• [*3]: After the auto-detection function is turned on, the switch will automatically detect the connection of the computer’s USB interface and perform intelligent switching. If it detects that a newcomputer’sUSB interface is connected, it will automatically switch to the newly connected computer; If the USB interface is disconnected, it will automatically switch to the next connected computer. If it is detected that the USB interface of the non-enabled computer is disconnected, the connections will not be switched. If you turn on the auto-detection function and then turn on the auto-polling scan function, it will automatically skip the computer which is unconnected to the USB port.
• [*4]: “CTRL” and “SHIFT” can be used regardless of left or right.
• [*5]: The hotkey [Ctrl + Shift + 1] means pressing the “Ctrl” key and not releasing it, then pressing the “Shift” key and then not releasing it, and then pressing the number “1” key, then release all keys.
• [*6]: SPECIAL ATTENTION: Only one of the four hotkey switch modes can be used at the same time. For example, When you use the “Scroll” mode to switch, another three modes will not work. If you want to switch to another hotkey mode, pls operate according to the above tables.

RS232 Port Description

The serial communication data format is: baud rate 115200, one seventy bits, eightdata bits, one stop bit, no parity bit.

Panel Description

Connection Diagram

References

• JC-HICI聚诚合创官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>