ASUS ROG RYUJIN III ARGB Series CPU Liquid Cooler User Guide
- June 12, 2024
- Asus
Table of Contents
- Package contents
- AIO cooler installation
- For Intel 115X/1200
- Connect the 9-pin USB 2.0 cable
- Connect the 4-pin fan cable
- Remove HEX protection caps before installing the radiator
- Connect the fans
- Install the fan screws
- Connect the fan cable to the motherboard
- Download control software
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ROG RAUJIN III RGB SERIES
CPU LIQUID COOLER
CPU LIQUID COOLER
Package contents
NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.
AIO cooler installation
NOTE: The illustrations in this section are for reference only, but the installation steps remain the same.
A. Install the Intel backplate
B. Install the Intel standoff screws
C. Install the pump
For Intel 1700
For Intel 115X/1200
NOTE: We recommend installing the pump so that the water pipes of the pump face towards or away from you for optimal performance (motherboard positioned with rear IO ports on your left).
A. Remove the pre-installed heatsink mount
B. Install the AMD mounting bracket
C. Install the pump
For AMD AM4
For AMD AM5
NOTE: We recommend installing the pump so that the water pipes of the pump face towards or away from you for optimal performance (motherboard positioned with rear IO ports on your left).
Connect the 9-pin USB 2.0 cable
Connect the 4-pin fan cable
NOTE: The AIO_PUMP and W_PUMP+ headers are set to operate at full speed (PWM 100%) and will cause the pump to operate louder.
Remove HEX protection caps before installing the radiator
Top side
Connect the fans
Install the fan screws
Connect the fan cable
NOTE: Make sure to only connect one fan cable (either the male or female
fan cable).
WARNING! The bundled male/female fan cables can only be connected to the
fans in one orientation and only connected to their corresponding connectors.
Failure to do so may cause damages to the fan.
Installing the radiator
Connect the fan cable to the motherboard
Download control software
Please visit the product support page at https://rog.asus.com/ to download and install the control software. A: Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].
References
- ROG - Republic of Gamers|Global | For Those Who Dare
- ROG - Republic of Gamers|Global | For Those Who Dare
- ROG - Republic of Gamers|Global | For Those Who Dare
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>