legrand 412170-199121 Connected Latching Relay Instruction Manual

: June 12, 2024
: Legrand

Table of Contents

Requires the installation of a:
Composition
- Control wiring authorized
Imperative security precaution
Preparation, connection
Add the Latching Relay in a connected installation
Finalize the installation in the Legrand Home + Control app
Use by manual control and status LED
Wireless push button resetting
**Reset a Connected Latching Relay to remove it from a connected
Customer Service
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

legrand 412170-199121 Connected Latching Relay

Requires the installation of a:

Composition

Control wiring authorized

|

U

|

I

| | | | | | |
---|---|---|---|---|---|---|---|---|---
-5°C
+45°C| 100-240V~
50/60Hz| 16A MAX| 2,4 à 2,4835Ghz <100 mW| Silent < 10dB| Planning| Measure| 3840W| 650W| 3000W

Imperative security precaution

The instructions for installation and use must be strictly observed in order to avoid the risk of electric shock or fire.

Preparation, connection

C1, C2:
MAX 2x 1.5mm² 2.5mm²

N, L, Load:
MAX 2x 2.5mm² 6mm²
C1,C2, N, L, Load:
C1,C2, N, L, Load:

Preparation, connection

Wiring examples

Do not use a switch (with dimmer option) connected to control a Connected Latching Relay.

The control circuit (upstream terminals C1 and C2) have an integrated power and an integrated protection.

For the protection of the Connected Latching Relay, it is recommended to use a circuit breaker or a gG fuse with current rating ≤ 16A.

Wired installation
Wired installation with junction box
Mixed wired and wireless installation
Wireless installation

: Non-functional indicator lights on push-buttons with indicator lights with connected latching relay

N (neutral) = blue
L (Line) = everything but blue and green/yellow
Line after contact = usually purple, orange…

Tips: in case of replacement of an old push button by a wireless control, isolate wires that are no longer used.

Add the Latching Relay in a connected installation

Turn off the power at general circuit breaker
Turn on the power at the **general circuit breaker* once the installation completed and controlled

In order to restart all connected products at the same time.
**: After wiring the installation, refit the front plate so that no active live part is accessible.

Finalize the installation in the Legrand Home + Control app

Download the Home + Control App and follow the instructions for adding the connected product in your setup.

You also have the option of controlling your installation via a voice assistant. and can customize your scenarios via the Home + Control App.

|
---|---

You also have the option of controlling your installation via a voice assistant, and can customize your scenarios via the Home + Control App.

| |
---|---|---

Use by manual control and status LED

Wireless push button resetting

Press and hold the center of the push button until the LED lights up in orange, then briefly press on the center to confirm the reset.

**Reset a Connected Latching Relay to remove it from a connected

installation**

Press the configuration button of the Connected latching relay (> 5 seconds) until the configuration indicator lights up in fixed red. It is no longer associated with the gateway present in the installation.

Customer Service

www.legrand.fr/reference/412170
LEGRAND – Pro and Consumer Service – BP 30076
87002 LIMOGES CEDEX FRANCE • www.legrand.com

UE SIMPLIFIED DECLARATION OF CONFORMITY

The undersigned,
Legrand
declares that the radio equipment listed on this instruction sheet are compliant to the directive 2014/53/UE.
The full text of the UE declaration of conformity is available at the following website:
www.legrandoc.com