REDRAGON AATROX Wireless 26000 DPI MMO Gaming Mouse Instruction Manual
- June 12, 2024
- REDRAGON
Table of Contents
REDRAGON AATROX Wireless 26000 DPI MMO Gaming Mouse
Dear user
Thank you for choosing our REDRAGON product. To protect your rights and
for better customer service, we ask that you note our warranty rules.
- Within guaranty period, repair is guaranteed for failure due to electrical circuit problems. Other damages, such as disassembly, hard impacts, submersion into water, plugging Into Improper current or voltage, and damage caused by natural disasters such as flre, flood, or earthquake are not Included.
- Consumable parts (such as foot pad) and spare parts replacement are not lncluded In our warranty.
OS Support
Windows XP/Vista/Win 7/Win B/Win 10/Win 11
Button Description
- Left mouse button.
- Right mouse button.
- Scroll wheel and middle button.
- Forward button.
- Backward button.
- DPI+ button.
- DPl- button.
- Profile button.
- POWER Mode-SW.
Basic Operation
How to Connect the Mou1e with a Computer Wired Connection
- Take out the USB to USB C cable In the package and plug the mouse to your computer.
- Slide the power switch on the bottom of the mouse to ECO/OFF.
- The computer will recognize and configure the mouse automatically.
- The mouse is under rechat9ing whatever the power switch is put 10 On /ECO. The scroll wheel and LOGO will light up in red while charging, charging time is about 4 hours, scroll wheel and logo lights will turn to green when mouse is fully charged.
Ghz Connection
- Take out the USB receiver in the package and plug it into any available USB port on your computer.
- Slide the power switch on the bottom of the mouse to On or ECO.
- The computer will recognize and configure the keyboard automatically.
- The mouse will be ready for use when the configuration Is finished. The LED of the LOGO wlll llght on then If the power switch on the bottom of the mouse to ON.
- The mouse can work about 8 hours with all backlights OFF, and about 2 hours with all backlrght ON. The scrol I wheel and Logo LEDS are flash Indicated that battery rs low.
- Recharge the keyboard when the battery is low by Type C to USB A cable, in this way I its in wired connecting mode.
DPI level with indicator, the LED is under the scroll wheel
Press DPI+ and DPI- button can be .switch mouse DPI level among 1 000(Red)/2000(8Iue)/4000 (Green)/8000(Purple)/26000(Yellow}, defaulted as 1000 DPI.
The profile setting
Press the profile button at the bottom of the mouse to save and quit from the
current configuration.
The report rate setting
Report rage switch button: Middle bunon+backward bu1ton. There are 4 levels of
report rates that can be switched by the report rate button, the range is from
125Hz/250Hz/500 Hz /1000 Hz. The indicator LED under the scroll wheel will be
twinkle 1 time,2 times, 3 times,4 times for 125HZ/250HZ/500HZ/1000HZ.
Auto Sleep and Smart Shutdown
- First level of auto sleep , the mouse LEDs are turned OFF when it is 1 munites out of working, wake It up by pressing the left+mlddle+rlght button, or Just move the mouse to wake it up.
- The second level of auto sleep.the mouse LEDs are turn off when it fs eight minutes out of working, wake it up by pressing the left+middle+rigrlt button, or just move the mouse to wake it up.
Low Battery Indication
The scroll wheel and logo LEDs will flash in RED when battery is low.
Backlight effects {Or set via software)
Press the Scroll wheel button and +Forward button to switch the effects
Storage for the Nano USB Receiver
The nano USB receiver can be stored in the storage slot on the bottom of the
mouse.
Software Instructions
Please download the software on www.redragonzone.com for this mouse. You can get more functions and settings after software installation.
- The DPI value can be set from 100 to 26000 DPI.
- Continuous keystroke function: Set t he number of clicks and delay time.
- Backlight mode of the LOGO: Steady ON/OFF.
- Backlight mode of the side edge: Steady/DFF.
- 10 of the mouse bu1tons can be remapped to various actions.
How to Recharge the Battery
When the battery Is low, please recharge the batter In tlme. Take out the USB
to USB C cable and connect the mouse and any USS power output port. While the
battery is under recharging, the scroll wheel lights up and flash firstly in
red (if the battery is very low), then in yellow and finally lights steadily
on in green when the battery is fully recharged. Meanwhile, the side edge
light lights up and expands from back to front in red till the battery is
fully recharged. The banery can be recharged for more than 300 cycle times.
And you can use the mouse while it is under recharging.
Note: Slide the power switch on the bottom of the mouse to OFF for long- term storage.
CAUTION: DO NOT CHA RGE THE MOUSE BYWALL PLUG, INPUT VOLTAGE MAX SV/2A.
How to Reconnect the Mouse the with the USB Receiver
The mouse may lost connecfton with trle USB receiver for some occasional
reasons such as strong magne1, vlolent vibration. So you may need to reconnect
the mouse with the USB receiver. In this case, unplug the receiver and plug it
back again. Slide the power switch on the bottom of the mouse to ON or ECO,
press and hold the Left+Middle+ Right button at the same time till the scroll
wheel lights up and Hash In yellow green. It wlll flash for about twenty
seconds and then change back to the previous light effect. The reconnection
will be completed and you can use the mouse then.
FAQ
- If the mouse is not responding, please check whether the mouse is plugged correctly in the corresponding computers USB port, or try another USB ports.
- If the mouse is moving slowly, jumping or with delay, pler1se try another surface. Dark, dirty, un-flat, bright surfaces may affect the performance of the mouse. Mouse pad is strongly recommended.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1 s of the FCC Rules.These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject the following two conditions {1 lthis device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
California Proposition 65
WARNING; Risk of Cancer from [Name of one or more chemicals known to cause cancer] And Reproductive Harm From [Name of one or more chemicals known to cause reproductive toxicity] Exposure – www.P6SWarnings.ca.gov.
BATTERY SAFETY GUIDELINES
- DO NOT replace the battery with a different model.
- DO NOT use this product if the battery shows signs of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
- DO NOT touch the battery fi material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
- DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standard operating condition.
- DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
- DO NOT impact, bend, alter, disassemble, or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful.
CAUTION
Failing to follow all safety guidelines may result product damage, explosion,
fire, and/or electric shock.