MBE Engineering Mercedes-Benz ML W163 Flip Key User Guide
- June 3, 2024
- MBE Engineering
Table of Contents
MBE Engineering Mercedes-Benz ML W163 Flip Key
How to use ML Quick Start
ML QUICK START IS A NEW DEVICE, TO PROGRAM A MERCEDES ML-CLASS W1S3 KEY
QUICKLY RND EASILY. YOU ..JUST NEED TO CONNECT THE DEVICE TO THE OBDII IN THE
CAR. THE ENTIRE PROCESS ONLY TAKES A FEW MOMENTS. THE DEVICE ALSO FIXES THE
COMMON “START ERROR” PROBLEM.
THE DEVICE WORKS ONLY WITH SPECIAL REMOTES PURCHASED IN OUR ONLINE STORE
CUT NEW BLRDE RN TURN IGNITION ON. NEXT CONNECT DEVICE TO 08011
PRESS THE STRRTBUTTON. YOU WILL GO TO THE MRIN MENU.
PAOCEOUAE FDA PAOGARMMING R NEW AEMOTE RNPCF TARNSPONOEA
PRESS THE “PROGRAM KEY” BUTTON, THEN SELECT “REMOTE+PCF” BUTTON ON THE NEXT
SCREEN.
PROCEDURE TO FIX “START ERROR
IF YOU SEE “STAAT EAAOA” QA “EAAOA” ON THE DASH, MAKE SUAE THAT THE IGNITION KEY HAS A TAANSPONDEA IN n: IF THE TAANSPONDEA IS IN THE KEY, STAAT THE “FIX STAAT EAAOA” PAOCEDUAE.
WITHIN 5-6 SECONDS IF YOU SEE MESSAGE “SUCSESSFULLY” THE “FIX STAAT EAAOA” PAOCEOUAE IS COMPLE IE. NOW YOU CAN STAAT THE CAA.
PAOCEDUAE FDA “UNLOCK PCF
IF SOMETHING WENT WRONG DURING THE PROGRAMMING PROCEDURE AND THE PCF IS
PROGRAMMED, YOU CAN USE THIS OPTION TD UNLOCK THE PCF TO USE err AGAIN DURING
THIS PROCEDURE IGNITION MUST BE ON!
PRESS THE “UNLOCK PCF” BUTTON writing 5-6 SECONDS IF YOU SEE MESSAGE
“SUCSESSFULLY” THE “UNLOCK PCF’· PROCEDURE IS COMPLETE.