marta MT-2218 Hair Clipper Set User Manual

: June 12, 2024
: MARTA

Table of Contents

marta MT-2218 Hair Clipper Set
Product Information
Product Usage Instructions
Parts list
CAUTION
INSTRUCTIONS BEFORE FISRT USE
OPERATION
CLEANING
SPECIFICATION
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marta MT-2218 Hair Clipper Set

Product Information

Product Name	Hair Clipper Set
Model Number	MT-2218
Manufacturer	Cosmos Far View International Limited
Manufacturer Address	Room 701, 16 apt, Lane 165, Rainbow North Street,

Ningbo,
China
Contact Information| Website: http://multimarta.com/
Phone: 8(812) 325-23-34

Product Usage Instructions

CAUTION: Keep the blades oiled!

INSTRUCTIONS BEFORE FIRST USE:

Before starting a haircut, inspect the clipper to ensure that it is free of oil between the cutting blade teeth.
Switch the appliance on to distribute the oil and make sure it is running smoothly.
Wipe off any excess oil.
Before the first use of the appliance, completely discharge and then charge the battery. It takes about 12 hours to charge the batteries for the first time. Each subsequent charging phase takes approximately 8 hours.
Usage time with fully charged batteries is approximately 60 minutes.
Charge the batteries at least once every 6 months, even if the clipper is not in use.
To charge the battery, connect the AC adapter plug to the connector in the base, and set the machine on the stand.
You can use the clipper during charging.
Unplug the AC adapter plug from the cradle socket and connect it directly to the clipper socket. Plug the power adapter into the wall outlet, and turn on the clipper.

OPERATION:

Comb your hair with a comb in the direction of hair growth.
Slide the blade adjustment lever and then move the comb up or down to set the desired length setting.

Parts list

Blades
5 levels comb
Blade adjustment lever
Housing
On / Off switch
Appliance plug
Adapter
Thinning control slider
The base for storage and/or charging
Oil
Brush for blade cleaning

CAUTION

Before the first use, check the device specifications and the power supply in your network.

The appliance is not intended for industrial or commercial use.
For indoor use only. Use only for domestic purposes according to the instruction manual.
Do not use with a damaged cord, plug, or other injuries.
Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the plug. Do not reel the cord around the device housing.
Never attempt to frame and repair the appliance by yourself. If you meet problems, please contact the nearest customer service center.
Using accessories or replacement parts that are not recommended or sold by the manufacturer may cause damage to the appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged if not in use.
To avoid electric shock and fire, do not immerse in water or other liquids. If that occurs, immediately unplug the appliance and contact the service center for inspection.
The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Never drop or insert any object into any opening on the appliance.
Make sure before use that the blades are aligned properly.
Do not place the appliance on a surface while it is operating.
Do not use the appliance with a damaged or broken comb or with teeth missing from the blades as injury may occur.

NOTE: keep the blades oiled!

INSTRUCTIONS BEFORE FISRT USE

Before starting a hair cut inspect the clipper, and ensure that it is free of oil between the cutting blade teeth.
Switch the appliance on to distribute the oil and make sure it is running smoothly. Wipe off any excess oil.
Before the first use of the appliance completely discharge and then charge the battery. It takes about 12 hours to charge the batteries for the first time. Each subsequent charging phase takes approx. 8 hours.
Usage time with fully charged batteries is approx. 60 minutes.
The batteries at least once in 6 months, even if the clipper is not in use.
To charge the battery, connect the AC adapter plug to the connector in the base, and set the machine on the stand.
You can use the clipper during charging. Unplug the AC adapter plug from the cradle socket and connect it directly to the clipper socket, plug the power adapter into the wall outlet, and turn on the clipper.

OPERATION

Comb your hair with a comb in the direction of hair growth.
Slide the blade adjustment lever and then move the comb up or down to set the desired length setting.
The corresponding hair length is visible on the side of the hair clipper.
With the hair clipping comb attached, the appliance can cut hair to 5 different lengths.
Slide the on/off slide upwards to switch on the appliance.

THIN-OUT FUNCTION allows for reducing hair volume without reducing its length. Slide the thinning cutter button to pull out the thinning cutter.

TIPS

Cut the hair in a relaxed and slow manner. Use short strokes only to work gradually over the head.
Always take off a little at a time.
Cut dry hair only as it is easier to control haircut length.
Don’t cut fast.
Don’t press hard on the clipper.

CLEANING

Mind cleaning the appliance regularly for appliance and blades’ long life.
Ensure that the appliance is switched off.
Remove cut hair from the blades with the brush.
Wipe the body of the hair clipper with a wet cloth. Dry the appliance.
Don’t immerse the appliance in water or another liquid.
Don’t use chemical or abrasive cleaners.
Mind oiling the blades of the clipper every few haircuts for appliance and blades’ long life.
Use only oil that is in the set.

SPECIFICATION

Model	Power supply	Net weight / Gross weight	Package size (L х W х H)
MT-2218	230 V, 50 Hz Output 3 V, 300 mA	0,165 kg / 0,65 kg	185 mm х 85 mm х

230 mm

WARRANTY

WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
The production date is available in the serial number located on the identification sticker on the gift box and/or on the sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters indicate the month, and the 6th and 7th indicate the year of device production. The producer may change the complete set, appearance, country of manufacture, warranty, and technical characteristics of the model without notice. Please check when purchasing the device.

Current information about service centers is available on the website http://multimarta.com.

Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China.

Made in China.