SolaX POCKET-WIFI-V3.0 Pocket Wi-Fi User Manual

SolaX POCKET-WIFI-V3.0 Pocket Wi-Fi

Product Information

• Product Name: Pocket WiFi V3.0
• Model: -P/-E
• Supply Voltage: 5V DC
• Rated Power: 1.3 W
• EIRP Power Frequency: 17.41 dBm (Measured Max. Average) 2.4 GHz
• Antenna Gain: 3 dBi
• Antenna Type: IPEX
• Degree of Protection: IP 65
• Operating Temperature: – 40~85 °C
• Wireless Mode: 802.11 b/g/n
• Dimensions: 95.545.728.5 mm
• Dimensions (-P/-E): 11245.728.5 mm Weight (-P/-E): 50 g

Product Usage Instructions

1. Installation :
   • Ensure all power has been turned off at least 5 minutes prior to installation.
   • Remove the cover of the DONGLE port at the bottom of the inverter.
   • For the -P/-E version of Pocket WiFi, screw the antenna to the end of the shell.
   • Plug the Pocket WiFi into the correct port of the inverter. Note that the side with the QR code is on the top and the direction of the button should be the same.
2. Monitoring:
   •  To register and monitor the Pocket WiFi, download theSolaxCloud Monitoring App on your smartphone by scanning the QR code or searching for “SolaxCloud” in your browser.
   • Login to your account and navigate to the Account page in the app.
   • Click on Wi-Fi Connection and enter your home Wi-Fi SSID and password. Then click on Setting. (Note: 5GHz Wi-Fi is currently unavailable.)
   • Choose the language by touching the Setting button at the upper left corner of the Monitoring App.
   • Create a new account by touching “Create a new account” at the bottom of the Monitoring App and enter the Registration No. (provided with the Pocket WiFi) and other required information to complete the registration.
   • Type in or scan the Registration No. of the Pocket WiFi and touch Next to join the network of the Pocket WiFi.
   • To access Local Mode, connect to the SolaX Wi-Fi signal (Wifi_SWxxxxxxxx) using your smartphone. Then open the Monitoring App, touch Local, and enter the password (initially the same as the Registration No.). Visit www.solaxcloud.com/wifiSetting/ for local password setting instructions.
   • To monitor via a computer or laptop, ensure it is connected to a network and open a browser. Enter www.solaxcloud.com/ and select your display language. Follow the User Guide for registration, login, adding sites, and other related operations.
   • Click on Warranty Manage to add your installation information and get a warranty for your devices.

INSTALLATION

Ensure all power has been turned off at least 5 minutes prior to installation.

• Remove the cover of the DONGLE port at the bottom of the inverter. Ready to install your Pocket WiFi.

• For the -P/-E version of Pocket WiFi, screw the antenna to the end of the shell.

  •  External antenna

  • Note that the side with the QR code
    is on the top and the direction of
    the button should be the sameNote that the side with the QR code
    is on the top and the direction of
    the button should be the same

  • Extended antenna

  • Antenna type is divided into external antenna and extended antenna. It is already selected when you purchase Pocket WiFi.*Antenna type is divided into external antenna and extended antenna. It is already selected when you purchase Pocket WiFi.

• Plug the Pocket WiFi into the correct  port of inverter.

  • Note that the side with the QR code is on the top and the direction of the button should be the same.

MONITORING

SolaxCloud Registration

• Step 1 : Use your smart phone to scan below QR code or search for the keyword “SolaxCloud” in browser to download the Monitoring App.
• Step 2: Touch the Setting button at upper left corner of the Monitoring App to choose language.
• Step 3: Touch “Create a new account” at the bottom of Monitoring App.
• Step 4: Type in or scan the Registration No. and type in other information to complete the registration.
  • No. and type in other information to complete the registration.

Wi-Fi Connection

• Step 1: Login your account and turn toAccount page in the app.
• Step 2: Click “Wi-Fi Connection”.
• Step 3: Type in or scan the Registration
  • No. of the Pocket WiFi. Then touch Next and agree to Join the network of the Pocket WiFi.
  • WiFi connection requires Android 10 or higher system or IOS system.
• Step 4: Type in your home Wi-Fi SSID and password, then Setting. *5GHz Wi-Fi is unavailable for now.
• Step 5: Wi-Fi setting successes. *Check more Wi-Fi setting information on www.solaxcloud.com/wifiSetting/.

Local Mode
Use your smart phone to connect the SolaX Wi-Fi signal (Wifi_SWxxxxxxxx). Then touch Local and type in password (initially same as the Registration No.) to access the Local
Mode in the Monitoring App.
Visit the local password setting instruction on www.solaxcloud.com/wifiSetting/.

Monitoring Website

• Step 1: Ensure that your computer or laptop is connected to a network.
• Step 2: Open a browser and enter www.solaxcloud.com/
• Step 3: Select your display language and read the User guide, then create a new account.
• Step 4: Complete registration, login, add
• Step 4: Complete registration, login, add site and other related operations according to the guidelines of the User guide.
• Step 5: Click the Warranty Manage and add your installation information to get warranty for your devices.

TECHNICAL DATA

WARRANTY REGULATION AND LIABILITY

Terms and Conditions
SolaX grants a standard 24-month warranty. The terms of this warranty begin from the date marked on the purchase invoice. SolaX will only perform warranty service when the faulty unit is returned to SolaX along with a copy of the invoice and proof of purchase issued by the dealer. In addition, the type label of the unit must be fully legible. If these requirements are not fulfilled, SolaX reserves the right to deny warranty service.
Exclusion of Liability

• Warranty claims are excluded for direct or indirect damage due to:
• Use of unit in ways not intended, improper or substandard installation, improper operation and unauthorized modification to the units, or repair attempts.
• Missing warranty card and serial number.
• Operating the units with defective protective equipment.
• Influence of foreign objects and force majeure. Inadequate ventilation.
• Non-observance to relevant safety instructions.

APPEARANCE AND DIMENSIONS

Pocket WiFi V3.0:

Pocket WiFi V3.0 -P/-E:

SAFETY INSTRUCTIONS

• Prior to installation, ensure all power going to the inverter has been cut off.
• Keep away from flammable, explosive materials.
• Do not dismantle or scrap by force.
• Children should be supervised to ensure that they do not play
• with this appliance.

FCC STATMENT

Indicates that the product must not be processed with household waste. It must be brought to an electric and electronic waste collection point for recycling and disposal. By ensuring the appropriate disposal of this product you also help in preventing potentially negative consequences for the environment and human health. The recycling of materials helps preserve our natural resources. For further information regarding the recycling of this product, please contact your municipality, local waste disposal center or the store where the products was purchased.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

PROOF OF PURCHASE

• Retain this page as proof of your purchase. See

• the warranty registration notice for more details.

• SolaX Power Network Technology (Zhejiang) Co., Ltd.

• ADD No.288 Shizhu Road, Tonglu Economic Zone, Tonglu City, Zhejiang Province, China.

• Tel +86 571 56260011

• FAX +86 571 56075753

• EMAIL service@solaxpower.com.

• WEB www.solaxpower.com.

Read this user manual carefully prior to use.

References

• Solax Cloud System
• SolaX Power: Solar Inverter, Battery System, EV Charger

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>