DELUX M618C 2.4G Wireless Office Mouse User Manual
- June 5, 2024
- DELUX
Table of Contents
M618C 2.4G Wireless Office Mouse
User Manual
M618C 2.4G Wireless Office Mouse
Thank you for choosing this wireless office mouse. Please read the user manual carefully when using this product.
Contents:
- Wireless office mouse………………X1
- User manual……………………….. X1
- USB nano receiver…………………X1
- AA battery(Optional)…………………. X1
Button Function:
- Left-click
- Right dick
- Scroll wheel
- DPI cycle
- Forward
- Backward
- ON/OFF switch
- AA battery
- USB nano receiver
Features
- Vertical shape
- With RGB light
- For home users and business office
Installation
Plug the USB nano receiver into the USB port in the computer, after detecting
successfully it will work normally.
RGB LED Light
Press the forward key and backward key at the same time for 3s to tum on or
turn off the RGB light.
Specification
| DPI | 1000/1200/1600 |
|---|---|
| Polling rate | 150Hz |
| Working voltage | 1.5V |
| Working current | ≤32mA |
| Compatible system | Windows 8/10/mac OS |
Receiver Connection
Equipping the mouse with a battery, insert the nano receiver to the USB port
of your computer, push the ON button on the bottom of the mouse, and the
receiver will detect the device automatically, plug and play.
Rebuilding up the Connection between Mouse and Receiver
If your mouse cannot work normally, you can try to build up the connection
again between mouse and receiver, as following steps:
- Take out the nano receiver from the computer and insert it again, it will detect automatically for about 15 seconds.
- Keep the mouse in ON mode and with the battery incorrect direction.
- Keep the effective distance within 10CM between the mouse and receiver
- Press the left button and right button at the same time for about 1-3 seconds, then release it. The connection is being built for about 10 seconds.
- If you cannot build up the connection in 10 seconds, please repeat the above steps.
Debugging Tips
- Check the receiver if it’s connected to the USB port.
- Check the ON/OFF button if in ON mode.
- Check the effective distance between the mouse and the receiver, and shorten it.
- Rebuild up the connection between the mouse and receiver.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.