Kaadas M9 Digital Lock User Manual

M9 Digital Lock

Access to your Future ! R9
User Manual

www.kaadas.com
Shenzhen Kaadas Intelligent Technology Co.,Ltd reserves all rights for the final interpretation to this user manual
****  All design and specifications are subject to change without notice.

Factory default settings

CAUTION
Failure to follow these instructions could result in damage to the product and void the factory warranty.
The accuracy of the door preparation is critical for the proper functioning and security of this product. Misalignment can cause performance degradation and a lessening of security.

1. Master PIN code: Default master PIN code is “123456″. Please modify it after installation.

2. User PIN code number: User PIN codes can be set up with PIN code numbers.
   00-05: Normal user PIN code number
   06: Temporary user PIN code, it will be deleted automatically after one time use.
   The temporary user PIN code can not unlock under the safe mode

3. User PIN code: User PIN codes can be set up only through master PIN code. Each PIN code has only one PIN code number.

4. Card: Maximum 43 cards can be registered with card numbers(00-66).

5. Fingerprint: Maximum 43 fingerprints can be registered with fingerprint numbers(00-66)
   Please refer to below item numbers in manual to set up the product with master PIN code and use it.

2Add user fingerprint
4 Delote user PiN code
5.Delete user fingerprint| PinGode………….6.1.1
Fingerprint …………….6.1.2
R9-5| 1.Add user PIN code
2Add user fingerprint
3 Add usercard
4.Delete user PIN code
5.Delete user fingerprint
6.Delete user card| Pin code…………… 6.1.1
Fingerprint……..6 1. 2
Card………………….. 6.1.3

Product picture

Bottom of outside escutcheon Mechanical key hole   Default mortise

Mechanical key NOTES
Pictures of components above are just for reference They can be different according to your model.

Packing list and explosive view

Please check all parts carefully according to the following list after opening the box

1. Rose cover(2)
2. Fixed screws of level handle(6)
3. Outside lever handle(1)
4. M4 through bolt guide(2)
5. Mortise(1)
6. Inside level handle(1)
7. M4 screws(2)
8. Network module(Optional)
9. M4*6 screws(2)
10. Battery cover(1)
11. Battery
12. Inside escutcheon
13. M5 screw
14. M3 screw
15. Inside mounting plate
16. Inside escutcheon silicon filler piece
17. M5 through bolt guide(2)
18. Outside escutcheon silicon filler piece
19. 0utside escutcheon

Prepare lock for installation

3.1 Confirm door direction
This product can be installed on 4 types of door directions. 3.2 Confirm door thickness

1. Measure your door thickness and confirm the screw package fits your door.
2.  Factory default screw package is for 40-60mm door thickness, if it doesn’t fit your door, please contact our dealer.

3.4 Fix directional screws
Change side of directional screws. PUSh the “bolt switcher” to the top side.
Turn round 180° and pull out the bolt
Push the “bolt switcher” to the end.
Directional Screw
Please make sure two directional screws are fixed on lock case from interior side of the door.
It makes panic open by hande from inside of the door.

Installation

4.1 Oril holes according to the instalition template, and put the mortise inside the door 4.2 Fixmortise scrows. Note: please make sure the dead bolt keep inside of the mortise during the installation
4.3 Install the though bolt guide and fix them on the outside escutcheon 4.4 Put connecting cable though the door, insert the key tailpiece into the holes on the: mortise, keep the outside escutcheon dlose to the door. Note: Cutthe key taipiscs and choose suitable though bolt guide according to door thickness

4.5 Fix the mounting plate with sorews. 4.6 Insert he connscting oable and moriise catie ino the portof inside escutcheon, keep escutcheon close to the door 4.7 Fix the two mounting screws 4.8 Install the though bolt guide, spring and <hait handle insert the lever handle into the handle hole, fix the screws and rose cover. 4.9 Install batteries, battery cover, strike plate, then installation is finished Note: Please test whether the door can open and close smoothly after installation
4.10 Turn the level handle and key 10 test whether the installation is successfully

How to set up product

5.1 How to enter Master mode

1. Wake up the touchscreen with your palm
2. Press [+] twice, inputMaster PIN code, and press [#]
3. Voice Guide: “Enter the management mode.”

5 .2 Menu index in Master Mode NOTE

1. You can operate following the voice guide.
2. Master and user PIN code have 6-12 digits, the default master PIN code is [123456].
3. Input 400+ [#] to check serial number of this lock.

User settings

Add User PIN code

| Enter Master Mode, press [1] to enter user settings, press [1] to add user PIN code
---|---
| Input User PIN code number (00-06), press to confirm
| Input 6-12 digits of User PIN code and press [#], input the same user PIN code again and press [#] o confirm.
Voice Guide: *Add succeed”

NOTES
00 – 05: Normal user PIN code
06: Temporary user PIN code, it will be deleted automatically
after one time use.

Add user fingerprint

| Enter Master Mode, press [1] to enter user setlings, press [2] to add user fingerprint
---|---
| Inputuser PIN code number (00-66), press [#] to confirm
| Put user fingor on the fingerprint scanner 4 times according to the Voice Guide
Voice Guide
1-Please remove your fingerprint and scan again
2! Add succeed

Add user card(Optional)

| Enter Master Mode,
press [1] to enter user settings,
press 3] to add User Card
---|---
| Inputuser card number (00-66),
press [#] to confirm
| Put User Card close to the card reader area until hearing the sound Di’
Voice guide: Add succeed”.

Delete user PIN code

| Enter Master Mode, press [1] to enter user settings,
press (4] to delete user PIN code
---|---
| Press [1] for deleting single PIN code
| Input PIN code number that you want to elete, press [#] to confirm.
Voice guide: Deletion succeed
| Press [2] for deleting all PIN code.
Voice guide: Deletion succeed.

Delete user fingerprint

| Enter Master Mode, press [1] to enter user settings, press 5] to delete user fingerprint
---|---
| Press[1] for deleting single fingerprint
| Input fingerprint numbers that you want to delete, press [#] to confirm. Or put your finger on the fingerprint scanner until hearing the sound” DI”, Voice guide: Deletion succeed
| Press [2] for deleting all PIN code.
Voice guide: Deletion succeed.

Delete user card(optional)

| Enter Master Mode, press [1] to enter user settings, press [6] to delete user card
---|---
| Press [1] for deleting single user card
| Input card number that you want to delete, press [#] to confirm. Or put card on the card reader area until hearing the sound” DI” Voice guide: Deletion succeed
| Press [2] for deleting all user card. Voice guide: Deletion succeed.

Voice Settings

| Enter Master Mode, press [2] to enter
System settings, press [3]to enter voice setting
---|---
| Press [1] to set voice mode, the system will have voice guide.
| Press (2] to set silent mode, the system will have no operating voice.

Language Setting

| Enter Master Mode, press [2] o enter system celings, procs (o enter language ssting.
---|---
| Press [1] to choose Chinese, the voice guide will bein Chinese
| Press (2] to choose English, the voice guide will be in English

Open mode settings

| Enter Master Mode, Press [2] to enter System setlings, press [5] to set up open mode.
---|---
| Press [1] to choose normal mode, Opening way: PIN code. fingerprint or card
| Press [2] to choose safe mode: PIN codesfingerprint (PIN code+card or fingerprint.+ card) double verification.

Modify master PIN code

| Enter Master Mods(refer to item 5.1),
press (1] to enter user setting,
press (9] to modify master PIN code.
---|---
| Input new master PIN code (6-12 digits)
press [#] to confirm and input new PIN code again,
press [#] to confirm.
Voice guide: setting succeed.

System query

| Under Master Mode, press [3] to enter system query.
---|---
| Press{1],the Serial Number query will be read.

How to use the lock

6.1 Under normal mode
6.1.1 PIN code opening

1. Wake up the keypad with palm
2. Input added user PIN code, press [#] to confirm. Voice guide: “Verification succeed”
3. Push down the level handle to unlock

NOTE
Users can input fake PIN code before or after correct user PIN code,
‘The PIN code can not be over 30 digits including the fake PIN code
6.1.2 Fingerprint opening

1. Put your finger(added) on the fingerprint scanner. Voice guide:

• Verification succeed: after hearing the sound “di” 2. Push down the level handle to unlock.

6.1.3 Card opening  

1. Putcard (added) on the card reader area Voice guide: ” Verification succeed: after hearing the sound *di
2. Press down the level handle to unlock

6.2 Under safe mode
Under safe mode, it needs double verification to open the door

1. PIN code + fingerprint
2. PIN code+ card
3. Fingerprint+ card

6.3 Mechanical key unlock
When batteries wear off, forget user PIN code, or system error, you can use mechanical key to unlock

1. Push up the keypad, insert the mechanical key into the key hole and turn the key, then you can turn level handle to unlock

6.4 Automatic/ Manual Mode

1. A-M switch is on the inside escutcheon.
2. When the mark is on up side means Auto mode, when you close the door, the main bolt will throw out automatically.
3. When the mark is on right direction means Manual Mode, the main bolt will not throw out automatically.

6.5 Dead locking and Privacy Mode button

1. Press * Multifunction button” once: main bolts will throw out to lock the door no matter in Automatic Mode Manual Mode when the door s closed
2. Hold” Multifunction button” 5sec (Privacy mode): main bolt will throw out to lock the door no matter in Automatic Mode or Manual Mode when the door closed, and the keypad will be locked down, the lock can be unlocked only by key from outside or unlock from inside by push down lever handle.

6.5 Dead lock
6.5.1 Dead locking from outside
Under automatic mode, dead bolt il throw outin 1.5 second after door closed Voice guide: “Door closed” 6.5.2 Dead locking from inside
Under manual mode, press * multifunction button” to lock the door, voice guide: “Door closed” 6.5.3 Privacy mode
Hold” Multifunction button”(Privacy mode): main bolt will stretch out to lock the door no matter in automatic mode or manual mode when the door closed, the keypad will be locked, only can unlock by key or unlock from inside. 6.5.4 Emergency unlock
Press “Mullifunction button twice to unlock from inside when you can not unlock from inside by handle

NOTE

1. Under normal mode, if continuously inputting wrong PIN code or fingerprint or card(optional )10 times, the keypad wil be locked for 5 minutes. Under locked condition, you can exit it by taking out battery and put them back, or you can unlock by other ways.
2. Under safe mode, continuously inputting any two kinds of opening ways among password/ fingerprinticard (optional )10 times, the system will be locked for 5 minutes.
   Under this condition, password/fingerprinticard(optional function) can’t be inputted.
   You can exitit by taking out battery and put them back to unlock system.

6.6 Defense Mode ON/OFF

1. ON: After closing the door from outside, keypad lights up, press button. voice guide: “Defense ON’, the lock will alarm when someone open the door from inside.
2. OFF: Defense mode will remove once there are someone open the lack in any ways from outside

6.7 Restore factory settings In case of forgetting master PIN code, you can remove inside esculcheon cover, keep pressing the reset button for over 5 seconds, Voice guide: “Your lock has restored to factory settings.”
Itmeans the lock has been restored to factory settings successfully.

NOTE
All the PIN codes fingerprints cards added beore will be ccaresaner esiors b racory soinge
The master PN cods wil ostore 85
[123456]. Please modify master PIN code as soon as possible.
6.8 How to use emergency power USB port If the batteries is wearing out, you can connect Micro-USB 5V to provide power.
Inset the cable into the emergency power USB port, then open the door in normal way.

NOTE
When the powor i lwer than 48V, systomwillsound voice uide: low power pioase ropiace m batton” atr svery e vou open G106k successiul. nthis Stuaton,ploase change baileios AGAP.
(do not uss types of baienes ogether of o and now batierss fogether).
6.9 How to change batteries 1. Battery life
In the battery box you can put 8AA 1.5V alkaline batteries maximum. It can be used for over one year as the standard used 10 times a day.
(Battery life is relative to user’s using habits, using environment, optional function and so on.)
2. Voice guide of replacing batteries
When hearing “Low power, please replace the battery”, please change bateries as soon as possible.

6.10 Extended functions( optional) Extended functions could be activated by network module.
Please contact our dealers for more details.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>