EKVIP 022515 Christmas Tree Instruction Manual
- June 12, 2024
- EKVIP
Table of Contents
ITEM NO: 022515
CHRISTMAS TREE
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).
Jula reserves the right to make changes.
For latest version of operating instructions, see
www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2022-03-14
© Jula AB
[1]
[2]
SAFETY INSTRUCTIONS
- Do not connect the product to the mains while still in the pack.
- Check that no light sources are damaged.
- Do not connect two or more products together to a power source.
- No parts of the product can be replaced, or repaired. The whole product must be discarded if any part is damaged.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING!
The product must only be used when all the seals are correctly fitted.
SYMBOLS
| Approved in accordance with the relevant directives.
---|---
| Recycle discarded product in accordance with local regulations.
TECHNICAL DATA
Rated voltage|
230 V ~ 50 Hz/31 V
---|---
Output|
6 W
No. of LEDs|
300
Protection rating|
IP44
INSTALLATION
- Remove the parts from the packaging.
- Angle out the foot of the Christmas tree so that it is at 90° between the four feet.
- Put the bottom part of the tree in the foot.
- Put the middle part in the bottom part.
- Put the top part in the middle part.
- Connect the contact parts together.
- Fold out the branches.
- Place the tree in the required place and plug the plug into a power point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>