RYOBI R18ALH Cordless Area Work Light Instruction Manual

R18ALH
ORIGINAL INSTRUCTIONS

R18ALH Cordless Area Work Light

Important!
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
It is essential that you read the instructions in this manual before operating this tool.
Subject to technical modifications.
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

AREA LIGHT HYBRID SAFETY WARNINGS

• Know your product. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this product. Following this rule will reduce the risk of electric shock, fire, or serious injury.
• Do not permit children to use work light. It is not a toy.
• The product is not designed to operate in wet or damp conditions. Exercise extreme caution when using the product outdoors, particularly when connected to the mains power.
• Carefully position the power cord during use. A power cord in your walking path can be a tripping hazard.
• If wrapped or in contact with fabrics, the work light lens can produce sufficient heat to melt some fabrics. To avoid serious personal injury, never allow the work light lens to come in contact with anything.
• Do not place hands or fingers between adjustable head and frame when positioning work light to avoid possible pinching.
• Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
• Do not place the product or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
• To reduce the risk of personal injury and electric shock, the product should not be played with or placed where small children can reach it.
• To reduce the risk of electric shock, do not expose to water or rain.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury.
• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 0.9m is not expected.
• Do not direct the light beam at persons or animals and do not stare into the light beam yourself (not even from a distance). Staring into the light beam may result in serious injury or vision loss.
• Use only with recommended battery pack and charger. Any attempt to use another battery pack will cause damage to the product and could possibly explode, cause a fire, or personal injury.
• Do not disassemble the product.
• Do not store the product in a damp or wet location, or in a location where the temperature may reach or exceed 40°C (104°F). For example, inside sheds, vehicles, or metal buildings in the summer.
• The product is non-dimmable; do not connect with any dimmers.
• Always power the product from a standard domestic supply. Power from generators or inverters may cause the product to malfunction.
• Check damaged parts. Before further use of the product, a part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Do not use the product if it does not function properly.
• Have the product repaired by a qualified person. The product is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified person using original spare parts, otherwise this may result in considerable danger to the user.

BATTERY SAFETY WARNINGS

• Risk of electric shock. Do not touch uninsulated portion of output connector or uninsulated battery terminal.
• Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
• Do not charge product battery in a damp or wet location. Following this rule will reduce the risk of electric shock.
• For best results, your battery should be charged in a location where the temperature is more than 10°C but less than 38°C. Do not store outside or in vehicles.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not incinerate the battery even if it is severely damaged. The batteries can explode in a fire.

MAINTENANCE

• When servicing, use only original Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
• Do not attempt to modify the product or create accessories not recommended for use with the product by the manufacturer.

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling.

SYMBOLS

and do not use with damaged power cord.
| Do not stare at light source.
| Do not expose to rain or damp condition.
| Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
|
---|---
Product specifications|
---|---
Voltage| 18 V
220 – 240V ****
50Hz / 60Hz
Wattage| 25 W
Illuminance at 1 m| 775 lx
Weight – excluding battery pack| 1,4 kg
Color rendering index (CRI)| 74
Rated luminous flux (lumens)| 2000
Correlated color temperature (CCT)| 6000
Battery and charger|
---|---
Compatible battery pack (not included)|
Lithium-Ion| RB18L13
RB18L15
RB18L25
RB18L26
RB18L40
Nickel Cadmium| BPP-1815
BPP-1817
Compatible charger (not included)|
Lithium-Ion| BCS618
BCL14181H
BCL14183H
Nickel Cadmium| BCS618
BCL14181H
BCL14183H

GUARANTEE

In addition to any statutory rights resulting from the purchase, this product is covered by a guarantee as stated below.

1. The guarantee period is 24 months for consumers and commences on the date when the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no guarantee provided in case of professional or commercial use.

2. There is, in some cases (i.e. promotion, range of tools), a possibility to extend the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of the tool is clearly displayed in stores and/or on packaging. The end user needs to register his/her newly-acquired tools online within 8 days from the date of purchase. The end user may register for the extended warranty in his country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of the data which are required to enter online and they have to accept the by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty. Your statutory rights remain unaffected.

3. The guarantee covers all defects of the product during the warranty period due to defaults in workmanship or material at the purchase date. The guarantee is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or being incorrectly connected. This guarantee does not apply to:
   – any damage to the product that is the result of improper maintenance
   – any product that has been altered or modified
   – any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
   – any damage caused by non-observance of the instruction manual
   – any non CE product
   – any product which has been attempted to be repaired by an nonqualified professional or without prior authorization by Techtronic Industries
   – any product connected to improper power supply (amps, voltage, frequency)
   – any damage caused by external influences (chemical, physical, shocks) or foreign substances
   – normal wear and tear of spare parts
   – inappropriate use, overloading of the tool
   – use of non-approved accessories or parts
   – carburetor after 6 months, carburetor adjustments after 6 months
   – power tool accessories provided with tool or purchased separately. Such exclusions include but is not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide
   – components (parts and accessories) subject to natural wear and tear, including but not limited to carbon brushes, chuck, power cord, auxiliary handle, sanding plate, dust bag, dust exhaust tube

4. For servicing, the product must be sent or presented to a RYOBI authorized service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organization. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous contents such as petrol, marked with sender’s address and accompanied by a short description of the fault.

5. A repair/replacement under this guarantee is free of charge. It does not constitute an extension or a new start of the guarantee period. Exchanged parts or tools become our property. In some countries delivery charges or postage will have to be paid by the sender.

6. This guarantee is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey and Russia. Outside these areas, please contact your authorized RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
service-and-support/service-agents.

References

• Ryobi Tools
• SAV Ryobi France: Pièces détachées et réparations Ryobi : le service client Ryobi
• Ryobi Norge | Elverktøy, ONE+, Hagemaskiner, 36V
• Ryobi Tools
• Ryobi Danmark | Elværktøj ONE+, Havemaskiner, 36V
• Ryobi Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>