marta MT-1371 Cordless Vacuum Cleaner User Manual
- June 12, 2024
- MARTA
Table of Contents
marta MT-1371 Cordless Vacuum Cleaner
Description
- HEPA-filter with steel mesh
- On-Off switch
- Composite tube
- Carpet & floor universal brush
- Dust collector
- Handle
- Tube joint inlet
The cordless vacuum cleaner is available in three models:
MT-1371, MT-1372, and MT-1373. The vacuum cleaner comes with a HEPA-filter
with steel mesh, an on-off switch, a composite tube, a carpet & floor
universal brush, a dust collector, a handle, and a tube joint inlet.
Technical Specification
- MT-1371: Li-ion 14.8V, 2200 /h Battery
- MT-1372: Li-ion 22.2V, 2200 /h Battery
- MT-1373: Li-ion 22.2V, 2200 /h Battery
- Dimensions (L x W x H): 390 x 150 x 150 mm
The production date is available in the serial number located on the
identification sticker on the gift box and/or on the sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
The producer may change the complete set, appearance, country of manufacture,
warranty, and technical characteristics of the model without notice. Please
check when purchasing the device. The warranty does not apply to consumables
(filters, ceramic and non-stick coating, rubber seals, etc.).
Manufacturer: COSMOS FAR VIEW INTERNATIONAL LIMITED ROOM 701, 16 APT, LANE
165, RAINBOW NORTH STREET, NINGBO, CHINA
Product Usage Instructions
- Charge the vacuum cleaner before first use.
- Press the on-off switch to turn on the vacuum cleaner.
- Attach the composite tube to the tube joint inlet.
- Attach the carpet & floor universal brush to the composite tube.
- Use the vacuum cleaner to clean carpets and floors.
- Empty the dust collector when it is full.
- Replace the HEPA-filter with steel mesh when necessary.
Note: Repairs should only be carried out by authorized service technicians. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorized work.
TECHNICAL SAFETY
- Ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. It is essential that they match to avoid damage to the appliance.
- Before using the vacuum cleaner, check for any signs of damage. Do not use a damaged appliance: It could be dangerous.
- The socket on the vacuum cleaner (depending on model) must only be used for the brush specified for use with this appliance.
- Do not pull or carry the vacuum cleaner by the cable and be careful not to damage the cable when withdrawing the plug from the socket.
- Keep the cable away from sharp edges and do not let it be squashed, for example, under a door.
- Avoid running the vacuum cleaner over the cable. This could damage the cable, plug or socket and pose as a safety hazard.
- The appliance must not be used if any of these have suffered damage.
- If the cable is damaged it must be replaced together with a complete cable rewind. For safety reasons this must only be done by authorized service technician. Otherwise the guarantee will be invalidated. Repairs should only be carried out by authorized service technician.
- Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorized work.
- It is important to switch the vacuum cleaner off before changing over accessories.
- Do not let the vacuum cleaner get wet.
- Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply.
- If moisture gets into the appliance, there is a risk of electric shock.
- Do not immerse the hose in water for cleaning. The vacuum cleaner hose should be checked regularly and must not be used if damaged.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
ATTENTION:
- Don’t absorb water or other liquid.
- Don’t place it near heat source.
MAINTENANCE:
The filter should often be washed when it is dirty and suggest to be replaced
after using 100 hours or so in order to avoid barrier. When the Plastic-filter
is full of dust, it should be washed.
ATTENTION:
- Don’t wash the filter in the washing machine or dry it with electrical heater, please refix it after drying the filter in the air.
- Don’t clean the outer-shell of vacuum cleaner in petrol oil-like liquid. Please rub it with water and soft soap liquid.
- Don’t clean the machine with the cloth full of water. Don’t let the water flow into the vacuum cleaner.
- Use only as described in manual. Only use manufacturers recommended attachments.
- Low battery indication – red LED flashing
- Charging indication – green LED. Charging time is 270 minutes
- Full battery indication – blue LED
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>