Oricom MFMB01 Flush Mount Bracket Instruction Manual

Oricom MFMB01 Flush Mount Bracket

Product Information

The Oricom product is a VHF marine radio with two models, MX1000 and MX1100G. The product comes with a Flush Mount Bracket, MFMB01, which allows users to install the radio in a location with a hole cut out of the surface. The bracket is secured to the left and right side of the transceiver using Philips head screws and cap screws. The product is covered by an express warranty of 12 months from the date of purchase by Oricom International Pty Ltd.

Product Usage

To install the Flush Mount Bracket, follow these steps:

1. Download the cutting template from the QR code supplied for each model of the VHF marine radio.
2. Cut a hole into the surface where you want to install the radio using the downloaded template.
3. Slide the transceiver through the cutout.
4. On the rear side of the transceiver, attach the MFMB01 brackets to the left and right side of the transceiver using the supplied Philips head screws. Ensure that the cap screw is at the rear of the radio.
5. Tighten the cap screws until firmly flush mounted. Use a hex key to securely tighten.
6. Tighten the locking nut to secure the Flush Mount Bracket in place.

Note : The images provided are for illustration purposes only.

Installation of Flush Mount Bracket

1. Cut a hole into the location of where the radio is to be flush mount installed, using the template downloadable on the supplied QR codes.

2.  Slide the transceiver through the cutout, as the drawing shows below.

3. On the rear side with access to the back of the transceiver, affix the MFMB01 brackets to the left and right side of the transceiver with the supplied Philips head screws, in the direction the image below shows.
   

4. Once secured to the transceiver, tighten the cap screws until firmly flush mounted. Securely tighten with Hex key (not supplied).

5. Tighten locking nut to secure.
   Images are for illustration purposes only.

Express Warranty (Australia)

• This Express Warranty is provided by Oricom International Pty Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South Windsor NSW 2756, herein after referred to as “Oricom”.
• Oricom warrants that the product is free from defects in materials or workmanship during the Express Warranty Period. This Express Warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia.
• The benefits of this Express Warranty are in addition to other rights and remedies you may have under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. In the event of a minor failure, Oricom reserves the right to choose to repair or replace the product.
• The Express Warranty Period will be a period of 12 Months beginning on the date of purchase of the product evidenced by your dated sales receipt. You are required to provide proof of purchase as a condition of receiving Express Warranty services.
• You are entitled to a replacement product or repair of the product at our discretion according to the terms and conditions of this document if your product is found to be faulty within the Express Warranty Period. This Express Warranty extends to the original purchaser only and is not transferable.
• Products distributed by Oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder of the Express Warranty Period of the Oricom branded product in which they are installed, whichever is longer. During the Express Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. All component parts removed under this Express Warranty become the property of Oricom. In the unlikely event that your Oricom product has a recurring failure, Oricom may always, subject to the Competition and Consumer Act 2010, at its discretion, elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance.
• No change to the conditions of this Express Warranty is valid unless it is made in writing and signed by an authorised representative of Oricom.
• Oricom will not be liable under this Express Warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of or in connection with a:
  • Failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product;
  • Willful misconduct or deliberate misuse by you of the product;
  • Any external cause beyond our control, including but not limited to power failure, lightning or over voltage; or
  • Modification to the product or services carried out on the product by anyone other than Oricom or Oricom’s authorised service provider.
• How to make a claim under your Express Warranty in Australia Oricom has a simple warranty process for you to follow:
  • Please call or email our Customer Support Team, 02 4574 8888 or support@oricom.com.au.
  • A Customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. If so, they will give you a Product Return Authorisation number.
  • We will then email a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the product for warranty service.
• Please note that if a Customer Support Team member advises that your product does not qualify for return, this warranty does not apply to your product. Products that are authorised to be returned to Oricom in Australia must include all of the following:
  • A completed Return Authorisation form
  • A copy of your Proof of Purchase (please keep your original copy)
  • The faulty product, including all accessories.
• Send the approved returns to:
  Oricom International Pty Ltd Locked Bag 658 South Windsor NSW 2756 Australia

Please note that this Express Warranty excludes expenses incurred by you in returning any faulty product to us. You must arrange and pay any expenses incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to us, however, we will arrange delivery of the repaired or replaced faulty product to you.

Important Information

Repair Notice
Please be aware that the repair of your products may result in the loss of any user-generated data (such as stored telephone numbers, text messages and contact information). Please ensure that you have made a copy of any data saved on your product before sending for repair. Please also be aware that products presented for repair may be replaced by refurbished products or parts of the same type rather than being repaired.

References

• Oricom Baby Monitors UHF CB Radios & Cordless Phones

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>