SCANGRIP 03.6100C Nova 2 Connect Compact Floodlight Instruction Manual
- June 12, 2024
- SCANGRIP
Table of Contents
SCANGRIP 03.6100C Nova 2 Connect Compact Floodlight
Product Information: NOVA 2 CONNECT
The NOVA 2 CONNECT is a high-efficiency COB LED work light with a built-in
power bank and USB outlet to charge mobile devices. It has a maximum
brightness of 2000 lm @ 100% and a battery life of up
to 27 hours at 12V 4.0 Ah battery and up to 58 hours at 18V 5.2 Ah battery. It
is compatible with METABO / CAS battery system 12V 4.0 Ah – 18V 5.2 Ah and 15
other 18V battery packs by using the
SCANGRIP CONNECTOR. It has an IK07 rating, is 161x164x78 mm in size, and
weighs 720g.
Product Usage Instructions:
- Step 1: Add the connector matching your battery pack.
- Step 2: To turn the lamp on or off, press the A button.
- Step 3: To increase the brightness, press the B button. To decrease the brightness, press the C button.
- Step 4: When the brightness level is changed, the new value is saved, and the lamp will start at that level the next time it is turned on.
- Step 5: The lamp is also compatible with 3rd party 18V batteries by using the SCANGRIP CONNECT system. It will accept the following battery voltages; 12V and 18V. It is possible to use a Scangrip power supply instead of a battery.
Warning: Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents. Avoid looking directly into the beam of light, as this will result in dazzling. Do not use the lamp near a naked flame. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. Luminaire is only suitable for direct mounting on non- combustible surfaces. The minimum distance from lighted objects should be 0.1m. Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.
FEATURES
BATTERY, CHARGER, CONNECTORS AND POWER SUPPLY ARE SOLD SEPARATELY
SCANGRIP CONNECTORs
for 18V battery packs
- BOSCH – 03.6140C
- BOSCH GREEN – 03.6141C
- DEWALT – 03.6142C
- EINHELL – 03.6143C
- FEIN – 03.6144C
- FESTOOL – 03.6153C
- FLEX – 03.6145C
- HAZET – 03.6146C
- HIKOKI – 03.6147C
- INGERSOLL – 03.6152C
- MAKITA – 03.6148C
- MILWAUKEE – 03.6149C
- RIDGID – 03.6154C
- SNAP-ON – 03.6151C
- WÜRTH – 03.6150C
Accessories
NOVA 2 CONNECT
WARNING:
-
Always respect applicable legislation for working with electrical equipment in order to reduce the risk of accidents.
-
Avoid looking directly into the beam of light, as this will result in dazzling.
-
Do not use the lamp near a naked flame.
-
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
-
Luminaire is only suitable for direct mounting on non-combustible surfaces.
USB POWER OUTLET: -
Built-in USB power outlet to charge mobile devices.
-
Output: 5V, 1A
USE: -
To turn the lamp on or off, press the A button.
-
To increase the brightness, press the B button.
-
To decrease the brightness, press the C button.
-
When the brightness level is changed, the new value is saved, and the lamp will start at that level the next time it is turned on.
BATTERY COMPLIANCE: -
The work light is designed to be used with Metabo CAS batteries.
-
The lamp is also compatible with 3rd party 18V batteries by using the SCANGRIP CONNECT system.
-
It will accept the following battery voltages; 12V and 18V.
-
It is possible to use a Scangrip power supply instead of a battery.
WARNING – RISK OF FIRE: -
Minimum distance from lighted objects 0.1m
Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.