TFA 30.3803.02 Thermo-Hygro-Wind Multi-Sensor Instruction Manual

TFA 30.3803.02 Thermo-Hygro-Wind Multi-Sensor Instruction Manual

Delivery content

• Wireless combined transmitter
• Instruction manual

Range of application and all the benefits of your new instrument at a glance

• Wireless combined transmitter for use with TFA VIEW WIFI weather stations and the VIEW App: e.g. item numbers 30.8000.01, 35.8001.01, 35.8002.01, 35.8003.01
• For the wireless transmission of wind direction, wind speed, temperature and humidity (868 MHz), transmission range up to 100 m (free field)

Safety notices

• This product is exclusively intended for the range of application described above.

WARNING

• Keep the device and the batteries out of reach of children.

• Small parts can be swallowed by children (under three years old).

• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.

• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged.
  Risk of explosion!

• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Make sure the polarities are correct. Never use a combination of old and new batteries together, nor batteries of different types. Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact, immediately rinse the affected areas with water and consult a doctor

CAUTION

• Unauthorised repairs, alterations or changes to the device are prohibited.
• Do not expose the device to extreme temperatures, vibrations or shock

Elements

Combined sensor (Fig.1)

Fig.1-A Wind wheel
Fig.1-B Solar panel
Fig.1-C LED signal light
Fig.1-D Wind vane
Fig.1-E Opening for attaching the adjustable base
Fig.1-F 2 screws for fixing
Fig.1-G Battery compartment
Fig.1-H Adjustable base (180° rotatable)
Fig.1-J Fixing screw
Fig.1-K 4 screw holes for mounting

Getting started

Combined sensor

• Mount the combined sensor (Fig.1-E) on the adjustable base (Fig.1-H). Tighten the two screws (Fig.1-F).
• Open the battery compartment at the bottom of the device (Fig.1-G) and insert three new batteries 1,5 V AA, polarity as illustrated.
• Close the battery compartment.
• With the solar panel (Fig.1-B) the battery life will be extended.
• The LED signal light (Fig.1-C) is flashing.
• Take the base station into operation according to the instruction manual of the base station or proceed according to “Add additional transmitters” in the Quick set-up guide.

Installation

Positioning of the rain sensor

• Make sure that the wind can blow freely around the combined sensor and is not blocked by nearby buildings, trees or any other objects.

• For best results, we recommend mounting the combined sensor on a mast, ideally 3 metres above any obstructions.

• Try to install the combined sensor so that it will be exposed to the normal wind conditions in your area.

• Attach the delivered adjustable base (Fig.1-H) to a mast (ø 25-28mm). Matching metal brackets and nuts are included in the scope of delivery.
  

• The adjustable base can also be attached to a surface. First screw the base in the desired position with the four screws (Fig.1-K). The adjustable base may be rotated by 90°/180°. Open the fixing screw (Fig.1-J) and loosen the adjustable base (Fig.1-H). Turn it in the desired position and tighten the fixing screw again.

• Make sure that the adjustable base is securely fastened.

• Then place the combined sensor on the adjustable base (Fig.1-E) and fix it with the screws (Fig.1-F).

• The wind wheel points upwards and the wind vane downwards.

• Ensure the combined sensor is mounted level with the solar panel (Fig.1-B) facing directly to the South. This will help optimize battery life and transmit correct wind direction. Use a compass if necessary.

Care and maintenance

• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Make sure that the wind cups and the vane can spin freely and are free from dirt, debris or spider webs.
• Remove the batteries if you do not use the device for a long period of time

Battery replacement

• As soon as the corresponding battery symbol appears in the display of the weather station or in the device information of the VIEW App, please change the batteries of the combined sensor.

Troubleshooting

batteries’ polarities are correct Change the batteries For further information see the instruction manual of the base station

If your device fails to work despite these measures, please contact the retailer where you purchased
the product from for advice.

Specifications

Combined transmitter

• Measuring range wind: 0 … 178 km/h (0 … 111 mph)

• Measuring range – temperature: -40°C … +60°C (-40°F … +140°F)

• Measuring range – humidity:: 10% … 99% rH

• Power supply: 3 x 1,5V AA (not included).
  We recommend alkaline batteries.

• Battery life: Approx. 2 years (with Alkaline batteries)

• Battery life: Approx. 2 years (with Alkaline batteries)

• Transmission frequency: 868 MHz

• Maximum radio-frequency power: < 25mW

• Transmission range: 100m (open field).

• Dimensions: 222 x 216 x 216 mm

• Weight: 221 g (device only)

Waste disposal
This product and its packaging have been manufactured using high-grade materials and components which can be recycled and reused. This reduces waste and protects the environment. Dispose of the packaging in an environmentally friendly manner using the collection systems that have been set up.

Disposal of the electrical devices

 Remove non-permanently installed batteries and rechargeable batteries from the device and dispose of them separately. This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE). This product must not be disposed of in ordinary household waste. As a consumer, you are required to take end-of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to ensure environmentally-compatible disposal. The return service is free of charge. Observe the current regulations in place!

Disposal of the batteries

Never dispose of empty batteries and rechargeable batteries with ordinary household waste. They contain pollutants which, if improperly disposed of, can harm the environment and human health. As a consumer, you are required by law to take them to your retail store or to an appropriate collection site depending on national or local regulations in order to protect the environment. The return service is free of charge.

The symbols for the contained heavy metals are: Cd = cadmium, Hg = mercury, Pb = lead.

No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at the time of going to print and may change without prior notice. The latest technical data and information about this product can be found in our homepage by simply entering the product number in the search box.

EU Declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 30.3803.02 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following
internet address: www.tfa-dostmann.de/service/downloads/ce
www.tfa-dostmann.de | E-Mail: info@tfa- dostmann.de
TFA Dostmann GmbH & Co.KG
Zum Ottersberg 12
97877 Wertheim – Germany

References

• cat.no
• Testseite für dostmann.de
• ᐅ Messgeräte, die begeistern | TFA Dostmann
• EU-Konformitätserklärung | TFA Dostmann

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>