HYUNDAI HY-T02 True Wireless Earphones User Manual

June 12, 2024
HYUNDAI

HYUNDAI HY-T02 True Wireless Earphones

Usage Instruction

  1. Don’t attempt to disassemble the unit and change any part, except there Is operation method mentioned in the manual.
  2. Don’t expose the unit to liquid, moisture or humidity, since it is not a waterproof product.
  3. Disconnect the unit with your BT device and move 1t to the safe area if the liquid get inside the unit.
  4. Don’t assemble or disassemble the unit to avoid electric shock, if there is water on your hands.
  5. Don’t expose the unit to extremely high temperature or dispose of the unit In fire as It will result in an explosion.
  6. Don’t place the unit in an electromagnetic interference environment to avoid malfunction.

Packing list

  • Headphone X 2

  • User manual X 1

  • Charging case X 1

  • Type-CX 1

Product Schematic Description

  • Headphone

  • Charging case

Product Specification

BT Version : V5.3
Transmission distance : 10M
Battery capacity : 30mAh
Playing time : About 5 hours (Earphone)
Charging time : About 1 hours (Earphone)
Rated input : 5V ⎓ 30mA

Charging Case Specification

Battery capacity : 230mAh
Charging time : About 1.5 hours
Rated input : 5V ⎓ 230mA
Playing time : About 20 hours (Charging case)
(All technical Information is subject to actual performance)

To Charge the case
Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case.
Connect the Type-C cable to the 5V power adaptor, and another end to the charging port of the Charging Case.

Rated input
5V ⎓ 30mA (headphones)

Rated input
5V ⎓ 230mA (Case)

LED Indicator Status

  • Charge the charging case (not fully charged): The indicator light will be flash in red.
  • The charging case ls fully charged: Red light always on.
  • Low power of charging case : The indicator light flashes red.
  • The headphones are not fully charged: The indicator will stay in white.
  • Fully charged the headphones: The indicator light is turn off.

Product Operating Instructions

  1. Power on:
    Method 1: Open the case, the headphones will turn on automatically.
    Method 2: Long touch the MF button of the headphones for 3s to tum on the headphones.

  2. Power off
    Method 1 : Put the headphones Into the charging case directly and close the case to turn off.
    Method 2 : Long touch the MF button of the headphones for Ss to turn off the headphones.{The headphone is not connected to the BT device)

  3. Pairing to the BT device
    Step 1: open the upper cover of the charging case, and the main and auxiliary headphones will automatically connected;
    Step 2: open the BT list of smart devices, search “HY-T02” and Connect (single ear use is supported).

Touch control button operating

Music playing mode

Lett/Right headphone operating

Hands free function

Lett Right headphone operating ( incoming call)

Active the voice assistant function (the smart devices support voice assistant function)

Lett/ Right headphone operating

Restore Factory Settings

When you turn on the headphones, make sure it does not connect to any BT device, and click the MF button 5 times to clear the pairing record, then turn off the headphones.

Name And Content Of Hazardous Substances In Products

Name and content of hazardous substances in products

Part Name|

Harmful materials

---|---
Pb| Hg| Cd| Cr(VI)| PBB| PBDE
Printed circuit assembly| 0|

0

|

0

|

0

|

0

|

0

Small structural parts such as shell|

0

|

0

|

0

|

0

|

0

|

0

This form is compiled in accordance with SJ/T 11364.
0 : Indicates that the content of the hazardous substance in all homogeneous materials of the part Is in Below the limit requirements specified in GB/T 26572.
X Indicates that the content of the hazardous substance in at least one of the homogeneous materials of t he part exceeds
The limit requirements specified in GB/T 26572.
The parts marked with •x· on the  form are all harmful due to the limitations of global technological development. Substitution of substances.
Printed circuit board components•: including printed circuit boards and their parts. electronic components, etc., Depending on the product model, the product you purchased may not contain all the above components
| Electronic and electrical products sold in the People’s Republic of China must mark this Logo. the number in the logo represents the product under normal use Environmental protection use period.

Warranty Service

Dear user. this warranty card Is the proof of your future warranty application, please cooperate with the seller to fill it out and keep It for future use!

Authorized by Hyundai Corporation
Authorized Party: Shenzhen Hyunda, Digital Electronics Co., Ltd.
Address: Address: 601A,Chentian Research and Development Building, No. 50, Baotian 1st Road,Xixiang Street, Bao’an District, Shenzhen City.
Manufacturer: HYUNDAI Creative (Shenzhen)Technology Development Co .. ltd Address: Room 1915, Block A, Rongchuang Zhit1ui Building. Intersection of Longsheng Road and Jinglong Jianshe Road, Shangten Community, Min::hI Street. Longhua District, Shenzhen, China

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF wanting for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals