BLUE SQUARE Multi-Color LED Pool Lights User Manual
- June 12, 2024
- BLUE SQUARE
Table of Contents
BLUE SQUARE Multi-Color LED Pool Lights User Manual
These instructions are applicable to Blue Square LED Multi-Color Lights programmed to be compatible with Pentair Controllers. The LED Pool Lights {P-Series) can be operated from either a wall switch or connected to a Pentair Controller.
When connected to the Pentair lntelli Touch®, EasyTouch®, or Color Sync™ Controllers, the fixed colors and color-shows can be easily selected using the controller.
When connected to a Wall Switch, manually switching on and off a specific number of times activates the fixed color modes and color-shows.
Lights will always start up in the previously selected color. To change from this setting, turn the wall switch off/on a specific number of times (as shown below) until your desired color or color-show is reached. During the off/on switching process, the light is turned off for a short period until the selected color is displayed. During this time, the pool will not be illuminated.
PROGRAMMING MODES
Number of times to cycle power 1-14
Cyles | Mode | Mode Description |
---|---|---|
1 | SAm® | Cycles through white, magenta, blue and green colors {emulates the |
Pentair SAm® color changing light)
2| Party| Rapid color changing building energy and excitement
3| Romance| Slow color transitions creating a mesmerizing and calming effect
4| Caribbean| Transitions between a variety of blues and greens
5| American| Patriotic red, white and blue transition
6| California Sunset| Dramatic transitions of orange, red and magenta tones
7| Royal| Richer, deeper color tones
8| Blue| Fixed color
9| Green| Fixed color
10| Red| Fixed color
11| White| Fixed color
12| Magenta| Fixed color
13| Hold| Save the current color effect during a color light show
14| Recall| Activate the last saved color effect.
Example: To select California Sunset Mode; turn the light on, then turn off and on six times. During the off/on switching process, no illumination will occur.
For supply connection, use only an isolating low voltage power supply with ungrounded output, evaluated for swimming pool use.
Toll Free: 800.277.4150
BlueSquaremfg.com
All Pentair trademarks are owned by Pentair. Inc. EasyTouch®, SAm® and lntelliTouch® are registered trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the USA and/or other countries.
WARNING
NEVER STARE DIRECTLY AT LED POOL LIGHTS. PROLONGED DIRECT EXPOSURE CAN CAUSE
EYE DAMAGE.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>