xanigomarine Mold and Mildew Prevention User Guide
- August 12, 2024
- xanigomarine
Table of Contents
xanigomarine Mold and Mildew Prevention
HOW TO USE
Remove Mold & Mildew with Xanigo Marine’s Mold & Mildew Stain Remover Our mold & mildew stain remover is a very effective way to remove mold and mildew. Being a harsh chemical it should only be used once to remove the mold, then the preventer should be applied to prevent the mold from coming back.
Liberally apply the Mold & Mildew Stain Remover to your seats. Let it sit for 60-90 seconds but do not let dry. An additional solution may need to be applied— keep it wet. Agitate in a circular motion with a brush to remove the mold from the pores. Rinse thoroughly with clean water.
NEUTRALIZE THE REMOVER
After rinsing the remover off with fresh water, it’s important to make sure
any leftover remover is neutralized so it doesn’t dry out your vinyl or impact
your stitching. Spray the Waterless Wash onto your seats and wipe it in with a
microfiber cloth to neutralize the chemicals in the remover.
“Works exceptional. Barely have to scrub. Most of the mold comes off without
scrubbing. I applied the protector on my boating accessories for 3 weeks & no
mold. From the humidity in Florida, mold spreads quickly. Thanks to this
product it keeps my new vessel new”
– Kurt Kropp – Google Review
Prevent Mold & Mildew with Xanigo Marine’s Mold & Mildew Preventer With just one application, your boat will be protected against mold and mildew for up to 90 days. The preventer creates a covalent bond to the surface to which it is applied. You can apply this to almost any marine surface including vinyl seats, life jackets, canvas, ropes, compartments, live, bilge, patio furniture, and other areas of high moisture. Spray the Mold & Mildew Preventer onto a clean, dry surface and spread evenly with a microfiber cloth. Or use one of our professional applicators
Maintain with Xanigo Marine’s Waterless Wash
Remove sunscreen (a major food source for mold) and leave a refreshing smell
without impacting the protective layer created by the mold & mildew preventer.
Use in between treatments.
The Results.
- They speak for themselves.
About us.
Located in St Augustine, FL. Xanigo Marine is dedicated to providing protocols
and solutions to the marine industry that make a difference. It all starts
with defining a better way to tackle challenges and providing the necessary
education, tools, and chemicals to perform the job. From online certification
courses to innovative products, Xanigo Marine is dedicated to improving the
way we manage boats and marine environments. With a focus on prevention vs
reaction, Xanigo Marine is changing how things are done.
Learn more by following us on our social channels and becoming part of the
Xanigo Marine family.
Purpose.
With a continued focus on bio-based solutions, non-leaching solutions, and
safer choice products, Xanigo Marine focuses on areas where we know runoff may
be inevitable and make sure we are safer for the environment. Do the right
thing!!!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>