VERSONEL VSL90 Outdoor Smart Motion Tracking LED Security Light Installation Guide
- June 6, 2024
- VERSONEL
Table of Contents
VSL90 Quick Installation Guide
| |
---|---|---
Switch off the power before installing the fixture| Select installation area
and install between 6.6 ft / 2 meters -10 ft / 3 meters above the ground| Feed
the fixture black and white wires through the Universal mounting bracket and
through the EVA gasket before connecting inside the junction box.
| |
---|---|---
Use the Wire Nuts and connect the wires inside the junction box :
Black to Black (Live) White to White (Neutral)
Note: An earth or ground wire is not required as the fixture Is double
insulated in design.| Align the EVA casket and Universal mounting bracket onto
the junction box and tighten with the junction box screws. Lastly, align and
mount the Light fixture onto the universal mounting bracket and cover the
screw heads with the decorative screw covers.| Switch the power back onto the
fixture. A noticeable green LED light will flicker on and off for 1 minute
inside the sensor lens that indicating the warm-up process. On completion, the
green LED light will become stable. The fixture has a built-in photocell to
automatically become functional and active during dusk Might time. To do a
walk test after installation, push the theSW4 button and hold for 2
seconds—The LED light will turn on and rotate towards sensor detection and
after 3 minutes the LED light will automatically turn off and become active
during night/ dusk time operations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>