BougeRV 200W CIGS Thin Film Solar Panel User Manual

June 11, 2024
BougeRV

CIGS Thin Film Solar Panel
User Manual

BougeRV 200W CIGS Thin Film Solar Panel

200W

Features

CIGS solar cell, in full copper indium gallium selenide solar cell, thin-film photovoltaic device that uses semiconductor layers of copper indium gallium selenide (CIGS) to absorb sunlight and convert it into electricity.

  1. Flexible —— Can fit around curved structures, flexible for all shapes.
  2. Stable output —— Stable output can still be guaranteed in shadow occlusion environments.
  3. Waterproof —— No worry about using in wet environments.
  4. Lightweight —— No frames, no special stands or mounting brackets needed.
  5. Glass Free —— Nothing to be broken.

CIGS Thin-film Modules vs. Polysilicon

BougeRV 200W CIGS Thin Film Solar Panel - Fig 1

Flexible
Can fit around curved structures.
Can be integrated into materials.| Rigid
Not bendable.
Requires racking to install.
---|---
Durable
Won’t break / Resistant to vandalism.
No risk of microcracks to cells.| Breakable
Can shatter.
Cells can develop microcracks.
Lightweight
No retrofitting required.
Can be used in applications such as
consumer goods where weight is a concern.| Heavy
Roofs require reinforcement to support weight.
Bonded Directly to Surface
Lower installation costs.
Resistant to theft.| Requires Mounting Hardware
Drives up installation costs.
Subject to theft.
Aesthetically Pleasing
Uniform “black-tie”appearance.
Dark interconnect wires.| Clunky-looking
Checkerboard appearance.
Bulku paneling does not conform to the roof.
Safer
FLEX modules are lightweight-won’t injure people or property in high wind or earthquake.
No cell degradation at high voltage.
No grounding wires to corrode.| Dangerous in environmental emergencies
Metal racks + box modules can damage people and property in an earthquake.
Metal racks + box modules hazardous in the event of wind pull-off.

Safety Instructions
Please follow the safety instructions for operation, the damage caused by not following the safety instructions shall be borne by the individual.
Please save these instructions
If you need to use the PDF version of the manual, you can contact us: service@bougerv.com.

Limitea Warranty

BougeRV provides 18-menth warranty service for the solar panel.
Please read and follow the safety instructions in the manual carefully. The warranty service takes effect from the date of purchase. Please provide the order number of the purchased product and the serial number (bar code) attached to the front of the solar panel when applying for warranty.

service@bougerv.com
www.bougerv.com
**** 1-669-232-7427
1-669-232-7427

Safety Instructions: The Limited Warranties do not apply to any of the following: The solar panel which in BougeRV’s absolute judgment have been subjected to misuse, abuse, neglect or accident, alteration, or improper installation, application, or removal. This includes, but is not limited to, installation, application, or removal by any party other than a BougeRV authorized dealer; non-observance of BougeRV’s installation, safety instructions; power failure surges, lightning, flood, fire, accidental breakage, or other events beyond BougeRV’s control.

Solar Panel Dimension

100W Adhesive Dimension
Single Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 2

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 3

100W Adhesive Compact Dimension
Single Box 

BougeRV 200W CIGS Thin Film Solar Panel - Fig 4

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 5

200W Adhesive Dimension
Single Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 6

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 7

100W Drilled Dimension
Single Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 8

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 9

100W Drilled Compact Dimension
Single Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 10

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 11

200W Drilled Dimension
Single Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 12

Double Box

BougeRV 200W CIGS Thin Film Solar Panel - Fig 13

How To Use

  1. Solar Off-grid System
    BougeRV 200W CIGS Thin Film Solar Panel - Fig 14

  2. Solar Power Station System
    Compatible with various types power stations
    As long as your other cable is equipped with MC4 connectors, then it could connect with our connector of the solar panel.BougeRV 200W CIGS Thin Film
Solar Panel - Fig 15 Note: Connecting the power station does not need connecting with the solar charge controller.

  3. Series Connection
    The panel can be wired in series to produce the desired voltage output.BougeRV 200W CIGS Thin Film Solar Panel - Fig
16

  4. Parallel Connection
    The solar panel can be wired in parallel to produce the desired current output with the solar parallel connector.

BougeRV 200W CIGS Thin Film Solar Panel - Fig 17

Electrical Parameters

100W   100W (Adhesive ) 100W (Drilled)
Maximum Power (Pmax) 1OOW +5% 10OW +5%
Solar cells Efficiency 16% 16%
Max. Power Voltage (Vmp) 25V +5% 25V +5%
Max. Power Current (Imp) 4.01A +5% 4.01A £5%
Open Circuit Voltage(Voc) 31.5V +5% 31.5V +5%
Short Circuit Current({Isc) 4.32A +5% 4.32A 15%
Max. System Voltage 1000V DC 1000V DC
Operating Temperature Limits -40°F ~ +185°F
-40°C~+85°C -40°F ~ +185°F

-40°C~+85°C
Temperature Coefficient of Pmax| -0.38%/°C| -0.38%/°C
Temperature Coefficient of Voc| -0.28%/°C| -0.28%/°C
Temperature Coefficient of Isc| -0.008%/°C| -0.008%/°C
Dimensions| 13.785.60.06 inches 3482175″1.5mm| 14.686.20.06 inches 3722190*1.5mm
Weight| 4.30 Ibs
1.95kg| 3.75 Ibs
1.7kg

100W Compact

  100W (Adhesive ) 100W (Drilled)
Maximum Power (Pmax) 1OOW +5% 10OW +5%
Solar cells Efficiency 16% 16%
Max. Power Voltage (Vmp) 25V +5% 25V +5%
Max. Power Current (Imp) 4.01A +5% 4.01A £5%
Open Circuit Voltage(Voc) 31.5V +5% 31.5V +5%
Short Circuit Current({Isc) 4.32A +5% 4.32A 15%
Max. System Voltage 1000V DC 1000V DC
Operating Temperature Limits -40°F ~ +185°F
-40°C~+85°C -40°F ~ +185°F

-40°C~+85°C
Temperature Coefficient of Pmax| -0.38%/°C| -0.38%/°C
Temperature Coefficient of Voc| -0.28%/°C| -0.28%/°C
Temperature Coefficient of Isc| -0.008%/°C| -0.008%/°C
Dimensions| 2644.30.06 inches
66011251.5mm| 27.144.90.06 inches 68911401.5mm
Weight| 4.30 Ibs
1.95kg| 3.75 Ibs
1.7kg

200W   200W (Adhesive) ) 200W (Drilled)
Maximum Power (Pmax) 200W ±5% 200W 1-5%
Solar cells Efficiency 16% 16%
Max. Power Voltage (Vmp) 2W ±5% 25V ±5%
Max. Power Current (Imp) 8.02A ±5% 8.02A -±5%
Open Circuit Voltage(Voc) 31.5V ±5% 31.5V ±5%
Short Circuit Current(Isc) 8.64A IS% 8.64A ±5%
Max. System Voltage 1000V DC 1000V DC
Operating Temperature Limits -40°F – +185°F
-40°C-+85°c -40°F – +185°F

-40°C-+85°C
Temperature Coefficient of Pmax| -0.38%PC| -0.38941°C
Temperature Coefficient of Voc| -0.28%/°C| -0.28%/°C
Temperature Coefficient of lic| -0.00896/°C| -0.008%PC
Dimensions| 2685.60.06 inches
66021751.5mm| 27.186.20.06 inches
689*21909Smm
Weight| 7.05 lbs
3.2kg| 6.39 lbs
2.9kg

BougeRV provides you with professional technical services. You can send your needs and the parameter information or instructions of your purchased accessories directly to our email: service@bougerv.com, we will help you build the ideal DIY solar system.

Frequently Asked Questions

Q1 What causes the low output power or no output during the use of solar panels? How can | solve it?****

1. Light intensity: Latitude, altitude, and sun altitude angle will affect the light intensity; multiple measurement results show that high temperature does not equal strong light intensity.
2. Solar installation angle: In the same geographical location, due to the different installation inclination angles, the cumulative amount of sunlight absorbed and the  cumulative difference in radiation amount causes the difference in power generation. It works best when the solar panel is roughly perpendicular to the light.
3. Solar panel surface temperature: When the solar panel surface temperature is 77°F, the output power is ideal. When the temperature is higher than 77 degrees Fahrenheit, the output power will decrease.
4. Shadow occlusion: During the working process of the solar panel, due to the partial occlusion of the shadow and the different degrees of dust settlement, the pollution of bird droppings will cause the “hot spot effect”, and the shaded part of the solar panel will not provide power contribution and will not be used in the solar panel. The interior
becomes an energy-consuming load, and at the same time causes the local temperature of the solar panel to increase. The overheated area can cause the EVA to accelerate aging and turn yellow, which reduces the light transmittance of the area, further deteriorates the hot spot, and leads to aggravated failure of the solar panel. Therefore, when using it, you should avoid blocking things and clean the surface of the solar panel regularly.
5. Load factors: When charging the energy storage, it will be limited by the maximum PV input current and voltage of the energy storage. Therefore, the input power value displayed on the energy storage display does not represent the maximum output of the solar panel. Please confirm the PV input related parameters of the energy storage
before use; Due to the own characteristics of PWM, there is a certain switching loss in the process of connecting with the solar panel, so the input power obtained by the battery will be lower than the maximum output of the solar panel.

Q2 Why the solar panel can’t provide 100% of the output energy?****

1. Limited by light intensity. Please refer to QI for more details.
2. Limited by the solar charge controller. The output conversion efficiency of the PWM controller is 75%, and the output conversion efficiency of the MPPT controller is above 90%.
3. Limited by the power station. The PV input voltage and PV input current of the power station will limit the output of the solar panel. It’d be better to confirm the input parameters of the power station before building a solar panel system.

Q3 What should | do if the solar panel | received is damaged, missing parts, or has no output?****

– Please send relevant pictures to our after-sales mailbox service@bougerv.com immediately, and leave your order number.
– We will reply one by one according to the chronological order sent by the customers.

Q4 What kind of device can be charged by this solar panel?****

1. Solar Power Station
2. Lead-acid Battery (need the solar charge controller)
3. Lithium Battery (need the solar charge controller)
– BougeRV sells different kinds of MPPT/PWM controllers, lithium iron phosphate battery and power stations to build your solar system.

Q5 How do | need to install this solar panel?****

– Tear off the protection tape behind the solar panel, and then stick the solar panel to the ground.

Q6 How should | roll my rollable solar panel?****

– Always roll the Rollable Solar Panel solar side out. Rolling solar side in will damage the panel and affect performance.

BougeRV Solar Panel comes with an 18-month warranty that commences from the date of purchase.
If you have any questions during use the product, please feel free to contact us:

Limitless energy, limitless life.
www.bouggerv.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals