AOC 27G2 144Hz AGON LCD Monitor User Manual

AOC 27G2 144Hz AGON LCD Monitor

Safety

National Conventions

The following subsections describe the notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.

These blocks are notes, cautions, and warnings, and they are used as

• NOTE: A NOTE indicates important information that helps you make better use of your computer system
• CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
• WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authorities.

Power

• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• The monitor is equipped with a three-pronged grounded plug and a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
• Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• To ensure satisfactory operation, use the monitor only with UL-listed computers that have appropriate configured receptacles marked between 100 240V ~~, Min. 5A
• The wall socket shall be installed near the equipment and shall be easily accessible.

Installation

• Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
• Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
• Do not place the front of the product on the floor.
• Leave some space around the monitor as shown below. Otherwise, air circulation may be inadequate hence overheating may cause a fire or damage to the monitor.

See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or with the stand:

Cleaning

• Clean the cabinet regularly with a cloth. You can use soft detergent to wipe out the stain, instead of strong detergent which will cauterize the product cabinet.
• When cleaning, make sure no detergent is leaked into the product.
• The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power cord before cleaning the product.

Setup

Contents in Box

Not all signal cables ( HDMI / D P / VGA / USB /Audio cables) CD manual will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

Setup Base

Please set up or remove the base by following the steps below. Please place the monitor on a soft and flat surface to prevent the scratch

Adjusting the monitor

• For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor’s angle to your own preference.
• Hold the stand so you will not topple the monitor when you change the monitor’s angle.

NOTE:

Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.

Connecting the Monitor

Cable Connections In the Back of the Monitor and Computer

1. HDMI 2
2. HDMI 1
3. D P
4. Analog (D Sub 15 Pin VGA cable)
5. Earphone out
6. Power

To protect equipment, always turn off the PC and LCD monitor before connecting.

1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.
3. (Optional – Requires a video card with HDMI port) – Connect one end of the HDMI cable to the back of the monitor and connect the other end to the computer’s HDMI port.
4. (Optional – Requires a video card with DP port) – Connect one end of the DP cable to the back of the monitor and connect the other end to the computer’s DP port.
5. Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, please refer to Troubleshooting.

Adaptive Sync function

1. The adaptive Sync function is working with DP/HDMI1/HDMI2
2. Compatible Graphics Card: Recommend list is as below, also could be checked by visiting www.AMD.com

• AMD Radeon™ RX 480
• AMD Radeon™ RX 470
• AMD Radeon™ RX 460

Radeon Pro Duo

• AMD Radeon R9 300 Series
• AMD Radeon R9 Fury X
• AMD Radeon R9 360
• AMD Radeon R7 360
• AMD Radeon R9 295X2
• AMD Radeon R9 290X
• AMD Radeon R9 290
• AMD Radeon R9 285
• AMD Radeon R7 260X
• AMD Radeon R7 260

Adjusting

Hotkeys

Source/Auto/Exit
When the OSD is closed, pressing the “ ” button will be the Source hot key function. When the OSD is closed, press the “ ” button continuously for about 2 seconds to auto-configure (Only for the models with D Sub).
Game Mode
When there is no OSD, press the”<” key to open the game mode function, then press the”<” or “>” key to select the game mode (FPS, RTS, Racing, Gamer 1, Gamer 2, or Gamer 3) based on the different game types.
Dial Point
When there is no OSD, press the Dial Point button to activate the Dial Point menu, and then press “<” or “>” to set Dial Point on or off.
Menu/Enter
When there is no OSD, Press to display the OSD or confirm the selection.
Power
Turn on/off the monitor

OSD Setting

Basic and simple instructions on the control keys.

1. Press the MENU button to activate the OSD window.
2. Press or navigate through the functions. Once the desired function is highlighted, press the to activate it. If there is a sub-menu, press or navigate through the sub-menu functions.
3. Press or to change the settings of the selected function. Press to exit. If you want to adjust any other function, repeat steps 2 and 3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on. To unlock the OSD press and hold the MENU button while the monitor is off and then press the power button to turn the monitor on.

Notes:

1. If the product has only one signal input, the item of “Input Select” is disabled
2. If the product screen size is 4:3 or the input signal resolution is native resolution, the item of “Image Ratio” is disabled
3. One of the DCR, Color Boost, and Picture Boost functions is activated the other two functions are turned off accordingly.

Luminance

Image Setup

Color Setup

Picture Boost

Note: Adjust the brightness, contrast, and position of the Bright Frame for a better viewing experience.

OSD Setup

Notes: If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1

Game Setting

Note: Boost or MBR must be above 75Hz refresh rate to start.

Extra

Exit

1. Press MENU (Menu) to display
2. Press or select Luminance and press to enter
3. Press to exit

LED Indicator

Troubleshoot

The power LED Is Not ON

| Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.

No images on the screen

| l  Is the power cord connected properly?

Check the power cord connection and power supply.

l  Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection. (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection.

• DVI/HDMI/DP input is not available on every model.

l  If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen.

If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows 7/8/10) and then change the frequency of the video card.

(Refer to the Setting the Optimal Resolution)

If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.

l  Can you see “Input Not Supported” on the screen?

You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly.

Adjust the maximum resolution and frequency that the monitor can handle properly.

l  Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has Ghosting Shadowing Problem

| Adjust the Contrast and Brightness Controls. Press to auto-adjust.

Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly into the video card output connector on the back.

Picture Bounces, Flickers, Or Wave Patterns Appears In The Picture

| Move electrical devices that may cause electrical interference as far away from the monitor as possible.

Use the maximum refresh rate your monitor is capable of at the resolution you are using.

Monitor Is Stuck In Active Off-Mode”

| The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot.

Make sure the monitor’s video cable is properly connected to the computer. Inspect the monitor’s video cable and make sure no pin is bent.

Make sure your computer is operational by hitting the CAPS LOCK key on

the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

---|---
Missing one of the primary

colors (RED, GREEN, or BLUE)

| Inspect the monitor’s video cable and make sure that no pin is damaged. Make sure the monitor’s video cable is properly connected to the computer.
The screen image is not centered or sized properly| ****

Adjust the H-Position and V-Position or press the hotkey (AUTO).

The picture has color defects (white does not look white)| ****

Adjust the RGB color or select desired color temperature.

Horizontal or vertical disturbances on the screen| Use Windows7/8/10 shut-down mode to adjust CLOCK and PHASE. Press to auto-adjust.

Specification

General Specification

Panel

| Model name| 24G2E/24G2E5
---|---|---
Driving system| TFT Color LCD
Viewable Image Size| 60.5 cm diagonal
Pixel pitch| 0.2745(H)mm x 0.2745(V)mm
Video| R, G, B Analog Interface & HDMI Interface & DP Interface
Separate Sync.| H/V TTL

Others

| Horizontal scan range| 30~160KHz
Horizontal scan Size(Maximum)| 527.04mm
Vertical scan range| 48~144Hz (24G2E)

48~75Hz (24G2E5)

Vertical scan Size(Maximum)| 296.46mm
Optimal preset resolution| 1920×1080@60Hz

Max resolution

| 1920×1080@60Hz(D-SUB)

1920×1080@144Hz(HDMI、DP) (24G2E)

1920×1080@75Hz(HDMI、DP) (24G2E5)

Plug & Play| VESA DDC2B/CI
Power Source| 100-240V～,50/60Hz

Power Consumption

| Typical (default brightness and contrast)| 21W
Max. (Brightness = 100,Contrast = 100)| ≤ 30W
Power saving| ≤0.3W
Physical Characteristics| Connector Type| D-Sub/ HDMI/DP/Earphone out
Signal Cable Type| Detachable

Environmental

| Temperature:| Operating| 0° to 40°C
Non-Operating| -25° to 55°C
Humidity:| Operating| 10% to 85% (non-condensing)
Non-Operating| 5% to 93% (non-condensing)
Altitude:| Operating| 0~ 5000m(0~ 16404 ft)
Non-Operating| 0~ 12192m (0~ 40000 ft )

Panel

| Model name| 27G2E/27G2E5
---|---|---
Driving system| TFT Color LCD
Viewable Image Size| 68.6 cm diagonal
Pixel pitch| 0.3114(H)mm x 0.3114(V)mm
Video| R, G, B Analog Interface & HDMI Interface & DP Interface
Separate Sync.| H/V TTL

Others

| Horizontal scan range| 30~160KHz
Horizontal scan Size(Maximum)| 597.888mm
Vertical scan range| 48~144Hz (27G2E)

48~75Hz (27G2E5)

Vertical scan Size(Maximum)| 336.312mm
Optimal preset resolution| 1920×1080@60Hz

Max resolution

| 1920×1080@60Hz(D-SUB)

1920×1080@144Hz(HDMI、DP) (27G2E)

1920×1080@75Hz(HDMI、DP) (27G2E5)

Plug & Play| VESA DDC2B/CI
Power Source| 100-240V～,50/60Hz

Power Consumption

| Typical (default brightness and contrast)| 28W
Max.(Brightness = 100,Contrast = 100)| ≤ 36W
Power saving| ≤0.3W
Physical Characteristics| Connector Type| D-Sub/ HDMI/DP/Earphone out
Signal Cable Type| Detachable

Environmental

| Temperature:| Operating| 0° to 40°C
Non-Operating| -25° to 55°C
Humidity:| Operating| 10% to 85% (non-condensing)
Non-Operating| 5% to 93% (non-condensing)
Altitude:| Operating| 0~ 5000m(0~ 16404 ft)
Non-Operating| 0~ 12192m (0~ 40000 ft )

Preset Display Modes

Standard| Resolution| H. Frequency (kHz)| V. Frequency (Hz)
---|---|---|---
VGA| 640×480@60Hz| 31.469| 59.94
VGA| 640×480@67Hz| 35| 66.667
VGA| 640×480@72Hz| 37.861| 72.809
VGA| 640×480@75Hz| 37.5| 75
VGA| 640×480@100Hz| 51.08| 99.769
VGA| 640×480@120Hz| 61.91| 119.518
DOS MODE| 720×400@70Hz| 31.469| 70.087
DOS MODE| 720×480@60Hz| 29.855| 59.710
SD| 720×576@50Hz| 31.25| 50
SVGA| 800×600@56Hz| 35.156| 56.25
SVGA| 800×600@60Hz| 37.879| 60.317
SVGA| 800×600@72Hz| 48.077| 72.188
SVGA| 800×600@75Hz| 46.875| 75
SVGA| 800×600@100Hz| 63.684| 99.662
SVGA| 800×600@120Hz| 76.302| 119.97
SVGA| 832×624@75Hz| 49.725| 74.551
XGA| 1024×768@60Hz| 48.363| 60.004
XGA| 1024×768@70Hz| 56.476| 70.069
XGA| 1024×768@75Hz| 60.023| 75.029
XGA| 1024×768@100Hz| 81.577| 99.972
XGA| 1024×768@120Hz| 97.551| 119.989
WXGA+| 1440×900@60Hz| 55.935| 59.887
SXGA| 1280×1024@60Hz| 63.981| 60.02
SXGA| 1280×1024@75Hz| 79.975| 75.025
HD| 1280×720@50HZ| 37.071| 49.827
HD| 1280×720@60HZ| 45| 60
HD| 1280×1080@60Hz| 67.173| 59.976
Full HD| 1920×1080@60Hz| 67.5| 60
Full HD (24G2E/27G2E)| 1920×1080@100Hz| 113.21| 99.93
Full HD (24G2E/27G2E)| 1920×1080@120Hz| 137.26| 119.982
Full HD (24G2E/27G2E)| 1920×1080@144Hz| 158.1| 144
Full HD (24G2E5/27G2E5)| 1920×1080@75Hz| 83.909| 74.986

Pin Assignments

15-Pin Color Display Signal Cable

19-  Pin Color Display Signal Cable

20-  Pin Color Display Signal Cable

Plug and Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.

FAQ’s

What should I do if the power LED is not on?

Make sure the power button is on and the power cord is properly connected to a grounded power outlet and to the monitor.

What should I do if there are no images on the screen?

Check the power cord connection and power supply. Also, check if the cable is connected correctly. If the initial screen does not appear, contact the Service Center or your dealer.

How can I adjust the Contrast and Brightness Controls?

Press the OSD button and navigate to the Luminance or Image Setup function to adjust the Contrast and Brightness Controls. Press to auto-adjust.

Can I use an extension cable or switch box with the monitor?

We recommend plugging the monitor directly into the video card output connector on the back.

What should I do if the picture bounces, flickers, or wave patterns appear in the picture?

Check if the monitor is placed on an unstable surface. Also, check if there is any interference from nearby electrical devices.

What is the AOC 27G2 144Hz AGON LCD Monitor?

The AOC 27G2 144Hz AGON LCD Monitor is a gaming monitor produced by AOC. It features a 27-inch display with a 144Hz refresh rate, making it suitable for fast-paced gaming.

What is the screen resolution of the AOC 27G2 monitor?

The AOC 27G2 monitor has a Full HD (1920 x 1080 pixels) resolution.

Does the AOC 27G2 monitor support Adaptive-Sync or G-Sync?

Yes, the AOC 27G2 monitor supports Adaptive-Sync technology, which is compatible with AMD FreeSync. However, it does not support NVIDIA G-Sync.

What is the response time of the AOC 27G2 monitor?

The AOC 27G2 monitor has a 1ms MPRT (Moving Picture Response Time) for quick and smooth transitions.

Does the AOC 27G2 monitor have built-in speakers?

Yes, the AOC 27G2 monitor has built-in 2-watt stereo speakers.

What connectivity options are available on the AOC 27G2 monitor?

The AOC 27G2 monitor offers multiple connectivity options, including DisplayPort 1.2, HDMI 1.4, HDMI 2.0, and a VGA input.

Can the AOC 27G2 monitor be height-adjusted or tilted?

Yes, the AOC 27G2 monitor supports tilt adjustment (-3.5° to 21.5°) and height adjustment (up to 130mm) to provide optimal viewing angles.

Does the AOC 27G2 monitor have VESA mount compatibility?

Yes, the AOC 27G2 monitor is VESA mount compatible with a 100mm x 100mm pattern.

What is the refresh rate of the AOC 27G2 monitor?

The AOC 27G2 monitor has a refresh rate of 144Hz, which allows for smooth and fluid gaming experiences.

Is the AOC 27G2 monitor suitable for professional color-critical work?

While the AOC 27G2 monitor provides decent color reproduction and image quality, it is primarily designed as a gaming monitor. If you require highly accurate color representation for professional work, you may want to consider monitors specifically targeted towards color-critical applications, such as those with IPS panels and wider color gamut coverage.

Download this PDF Link:AOC 27G2 144Hz AGON LCD Monitor User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>