CRYSTORAMA 8105-AG Paxton Four Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 8105-AG Paxton Four Light Chandelier
Dimensions
For Hanging
For Ceiling
WARNING
-
Electrical Danger
-
Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 4-Candelabra Bulb 60 watts Max Bulb not included
USE LED BULBS FOR EXTENDED USE This fixture is DRY rated
How to Install
- Insert the shade spoke in between top and bottom knurled nut.
- Secure the shade by twisting the top knurled nut.
- Slide the crystal bobeche over the socket.
- install the recommended bulbs into each socket.
- Screw the crystal ball into the bottom frame.
For Semi-flush
- Hook the canopy onto the loop on top of the fixture.
- Raise the fixture up to the ceiling and connect the wires.
- Secure the canopy onto the outlet box by ball nuts.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
PART NUMBER
A. Mounting Hardware
(1)Mounting Plate
(2)Mounting Screws
(3)Wire Nut
B. (1)Canopy;5″x5″x0.7″h;XMO8105AGCAN5IN
C. (2)Ball nut
D. (1)Chain;72”L x Ø4.0mmT;XMO8105AGCHA4MM
E. (1)Fixture Loop
F. (2)Knurled Nut
G. (1)Fabric Shade;16”x16”x7”h;XMO8105SHA16IN
H. (4)Socket
I. (4)Crystal Bobeche
J. (4)Small Crystal ball
K. (1)Big crystal ball
