REDRAGON CARAXES PRO Mechanical Gaming Keyboard User Manual
- June 12, 2024
- REDRAGON
Table of Contents
REDRAGON CARAXES PRO Mechanical Gaming Keyboard
Dear user
Thank you for choosing the RED DREAGON product. To protect your rights and
for better customer service, please read the following warranty rules
carefully.1. Within 18 months of purchase date, repair is guaranteed for
failure due to electrical circuit problems. Other damages, such as
disassembly, hard impacts, submersion into water, plugging into improper
current or voltage, and damage caused by natural disasters such as fire,
flood, or earthquake are not included.
2. Our warranty does not include Consumable parts (such as foot pads) and
spare parts replacement.
OS Support
WinXPNista/Win7/Win8/Win10 /Vlinl 1
- How to connect the keyboard with a computer Wired Connection
1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to OFF.
2. Take out the USB A to USB Type C cable in the package and connect the keyboard with your computer.
3. The computer will recognize and configure the keyboard automatically, M lights on in Red.
4. The keyboard will be ready for use when the configuration is finished.
5. Once the keyboard is powered up, charging begins. The LED marked with M light s on red. It will turn to white when keyboard is fully recharged.- 2.4G Wlralass Connac:tlon
1. Slide the 2.4G/OFF/BT switch on bottom of keyboard to 2.4G.
2. Take out the nano use receiver and plug it into an available use port on your computer. The computer will recognize and configure tne keyboard automatically.
3. The keyboard will be ready for use when ttie configuration is finished.
4. In some cases, you may need to pair the keyboard.Tum on the keyboard and press (FNl]+[R] for about 3 seconds. the LED marked with M flashes in green, plug the USB receiver into any available USB port on your computer within 20 seconds. The keyboard will be paired automatically. Make sure the keyboard has enough power before doing so.
5. The indicator will flash when the battery is low. Please recharge the keyboard in time or it will turn off automatically soon.- Bluetooth Connection
1. Slide the 2.4G/0FF/BT switch on bottom of keyboard to BT.
2. Press [FN1]+[QJ(or [W]/[E] for other Bluetooth devices), the LED marked with M flashes in blue (or cyan/magenta for the others)
3. Turn on Bluetooth and scan for available devices on your computer or smart phone. It will ftnd”BT3.0KB or BT5.0 KB” device. Select it and it will connect automatically.
- Function Introduction
1. . With standard USS and 2.4G/BT connections. the keyboard can be used on computers without any software or driver installation.
2. There are 19 backlight effects(FN2+8).
3. Commands of key combinations with [FNl] key
* [FN l+ESCJ: ~
* [FN1+1J:F1
* [FN1+2]:F2
* [FN1+3]:F3
* [FN1+4]:F4
* [FN1+5]:F5
* [FN1+6J:F6
* [FN1+7]:F7
* [FN1 J + [QJ: Select Bluetooth device one (for Bluetooth connection).
* [FN1] + [W]: Select Bluetooth device two {for Bluetooth connection).
* [FN1] + [E]: Select Bluetooth device three (for Bluetooth connection).
* [FNtJ + [RJ:Change to 2.4G wireless connection. Press and hold the [FNt]+[RJ for 3 s.econds to pair the keyboard with its. receiver.
* [FN1] + [Win]: Disable or enable the [Win] key.
* [FN1 J+[PJ=PRTSC
* [FN1]+[{ □=HOME
* [FN1 l+D }]=ENO
* [FN1}+? :J=PGUP
* [FNll+[‘ “l=PGDN
* [FNl]+[. >]=INSERT
* [FNl]+[I ?]=DELETE
4. Commands of key combinations with [FN2} key.
* [FN2]+[8]: Change backlight mode. There are 19 backlight patterns.
* [FN2]+[9J: Change backlight color under available patterns.
* [FN2] + [OJ: Turn On or Off the backlight.
* [FN2J + [-_J: Decrease the backlight brightness of the keyboard.
* [FN2] + [=+]:Increase the backllght brightness of the keyboard.
* [FN21 +cZJ: Slow down light rotating speed .
* [FN2] + [XJ: Add up light rotating speed.
* [FN2]+[A/S/O/WJ—/ ! 1-1″
* [FN2 ]+ [CAPS]: Press and hold for 5 seconds,back to the default setting.-
How to customiza backlight
Press FN2+Backspace to get start setting, AWSD keys default in green color in the moment, Press FN2+Backspace again, CapsLK is flash in Red in the momentJ press desired key for color setting, the single key color is Red/green/blue/yellow/purple/Cyan/white/OFF by each click, fix the color you want, press FN2+Backspace again to save setting, press FN2+8 to qt1it the setting mode. -
Keyboard sleep mode and power safe fundion
In 2.4Ghz and Bluetooth connecting,to safe power, there are two coditions that keyboard get into sleep mode.all LEDs and backlight turn OFF ,please click any key to wake up the keyboard .
1. power save mode at the first 3 minutes out of working, all backlight turns OFF,keyboard is working ,2.4G connecting is activity.
2. Sleep mode at the 30 minutes out of working, backlight turns OFF, keyboard is OFF, 2.4G is not connecting.- How to charge keyboard
- Check the battery statu, press FN1 +SPACE, Numbera keys from 1~0 will be the indicator of power statu, 1-3 keys light on in RED means the battery is lower than 30%, need to charge ASAP.
- Find the USB A to USB type C cable in the packaging ,plug the keyboard and connect it wit fl computer for charging, the LED indicator of keyboard will be turn to red.
- Remark; The LED indicator will be turn to red when keyboard is out of battery.
- Indicators on keyboard up of left
- “A” Is for captals lock Indication
- ‘M’ is for connection mode indication
FAQ
- If the keyboard doesn’t respond, please check if the keyboards USB cable is correctly inserted into the corresponding USB port on the computer, or try another USB port on the computer.
- If you spill liquid on the keyboard, please unplug the keyboards USB cable from the computer immediately. Wipe off excess liquid and put the keyboard in a dry and ventilated place. Make sure the keyboard is dried naturally before the next use
BATTERY SAFETY GUIDELINES
- DO NOT replace the battery with a different model.
- DO NOT use this product if the battery shows signs. of damage including, but not limited to tearing, deformation, leakage, or the smell of electrolytic material.
- DO NOT touch the battery fi material is leaking and seek immediate medical attention if any material comes into contact with your skin or eyes.
- DO NOT expose the battery to liquid, heat sources, electricity (outside of the product itself), or other non-standafd operati.-ig condition.
- DO NOT remove the battery except for proper disposal and recycling as required by local laws and regulations.
- DO Nor impact, bend. alter. dissemble. or otherwise damage the battery as the contents are volatile, hazardous, and can be harmful.
CAUTION:
- Failing to follow all safety guidelines may result product damage, explosion, fire, and/or electric shock.
- This device contains licence-exempt transmitter(s}/receiver(s) that com ply with Innovation, Science and Economic Development canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC Statement
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply wlth the limits for a Class B digital device, pursuant to Part 15 of the FCC Rt1les. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there rs no guarantee that lnterference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the Interference by one or more of the foll owing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circt.Jit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiorrv technician for help
- This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any ir,terfere.-ice received, including interference that may cause undesired operation.
California Proposition 65
WARNING: Risk of Cancer from [Name of one or more chemicals known to
cause cancer) And Reproductive Harm From [Name of one or more chemicals known
to cause reproductive toxicity] Exposure
–www.P65Warnings.ca.gov.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>