Skullcandy Stomp Mini XT Wireless Speaker User Guide
- June 12, 2024
- Skullcandy
Table of Contents
Skullcandy Stomp Mini XT Wireless Speaker
Product Information
The Stomp Mini speaker is a portable speaker that features a LED battery indicator, power on/off button, volume control buttons, play/pause button, next/previous track buttons, light show/strobe light button, strap hooks, TWS button, Multi-LinkTM button, AUX3.5mm input, USB-A audio in/charge out, USB-C charge out, and USB-Cpower input. The speaker complies with FCC/IC radiation exposure limits and should be operated within 20cm minimum distance betweenthe radiator and your body. It also contains a license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). The package includes the Stomp Mini speaker, a 5ft charging cable, and a user manual. The product comes with a 1-year warranty.
Product Usage Instructions
- Unbox the Stomp Mini speaker and all its components.
- Charge the speaker using the included 5ft charging cable and a power source.
- To turn on the speaker, press and hold the power button located on the front panel until the LED battery indicator lights up.
- Adjust the volume using the volume up/down buttons.
- To play/pause music, press the play/pause button located on the front panel.
- To skip to the next/previous track, press the next/previous track buttons located on the front panel.
- Turn on the light show/strobe light feature by pressing the corresponding button located on the front panel.
- Connect an external device using the AUX 3.5mm input or USB-A audio in/charge out port.
- Charge an external device using the USB-C charge-out port.
- Charge the speaker using the USB-C power input port.
- Use the TWS button and Multi-LinkTM button to connect multiple Stomp Mini speakers together.
- Use the strap hooks to attach the speaker to a bag or other carrying device.
- Operate the speaker within a 20cm minimum distance between the radiator and your body.
FUNCTIONS
Power ON / OFF:
Press and hold the “O” button for 2s. If not connected to a Bluetooth® device
or connected but idle (not playing audio) the speaker will turn OFF
automatically after 15 min.
Play / Pause:
Press the “ ” button once to play or pause the audio.
Volume Up:
Press “+” button to increase the volume.
Volume Down:
Press “-” button to decrease the volume.
Next Track:
Press and hold “+” button for 2s to skip track.
Previous Track:
Press and hold “-” button for 2s to go to last track.
Bluetooth® Pairing:
Press and hold the “Bluetooth®” button for 2s to enter Bluetooth® Pairing
Mode. The speaker will disconnect from any paired device and will become
available to pair with new devices. The speaker will stay in pairing mode for
60s, or until connected. Status LED will blink blue while in Bluetooth®
Pairing Mode.
True Wireless Stereo Pairing:
Press the “TWS” button on any two Stomp™ speakers to play audio in stereo.
Status LED will be cyan to indicate the Right channel and yellow to indicate
the Left channel.
Exit True Wireless Stereo Mode:
Press the “TWS” button to exit the TWS pairing.
SKDY Multi-link™ Transmitting:
First, connect to the Stomp™ Mini speaker by BT, AUX, or USB-A audio input
connection. Double press the “Multi-link™” button to set the speaker as
transmitting. Any receiving speaker-enabled SKDY Multi-link™ will now be able
to join. Status LED will be purple.
SKDY Multi-link™ Mode Receiving:
Single press the “Multi-link™” button to set the speaker as receiving (the
speaker will automatically disconnect from any paired Bluetooth® devices).
Status LED will be green. Up to 99 receiving speakers can be connected to a
single transmitting speaker.
Check Battery Status:
The 4 LED indicators show the battery level. Press and hold “+” and “-“
buttons together for 1s to initiate a voice prompt of the battery level.
Light Show Mode
Press and hold the “Light Show” button for 2s to turn the light show ON or
OFF. Single press the “Light Show” button to cycle between different light
show modes.
Strobe Light ON/OFF
Double press the “Light Show” button to toggle the strobe light ON or OFF.
Dual-Device Connection:
You can pair two transmitting devices (mobile phones for example) to the
Stomp™ Mini speaker at the same time to DJ together. Pause the music on the
first device to play a song from the second device.
Charge Out:
While the speaker is ON, plug a USB-C™ or USB-A cable into the appropriate
port to begin charging your compatible portable device automatically.
CHARGING THE STOMP™ MINI
Use the USB-C™ cable included to connect the speaker to an appropriate power source to begin charging. The LED indicators will show the battery is charging. When all 4 LEDs are ON the battery is fully charged.
Warning:
- To avoid damage to the speaker and battery, it is important to only use a power source that matches the power requirements listed on the speaker’s rating label.
- To avoid overheating, it’s recommended not to place the speaker in direct sunlight, especially while charging and playing music.
Battery status indication (not charging):
- 0-5% – speaker is OFF all 4 LEDs are OFF
- 5-10% – 1st LED blinks red, other LEDs are OFF
- 10-25% – 1st LED is ON white, other LEDs are OFF
- 25-50% – 1st + 2nd LEDs are ON white, other LEDs are OFF
- 50-75% – 1st + 2nd + 3rd LEDs are ON white, other LEDs are OFF
- 75-100% – All LEDs are ON white
Battery status indication (while charging):
- 0-25% – 1st LED blinks white, other LEDs are OFF
- 25-50% – 1st LED is ON white, 2nd LED is blinking. Other LEDs are OFF
- 50-75% – 1st + 2nd LEDs are ON white, 3rd LED is blinking. Other LEDs are OFF
- 75-99% – 1st + 2nd + 3rd LEDs are ON white, 4th LED is blinking. Other LEDs are OFF
- 100% – All 4 LEDs are ON white
CONNECTION PRIORITY
AUX > USB > BT (Bluetooth®)
To play from an AUX source, simply plug in an AUX cable to the speaker and
your audio source device. It will automatically have priority over USB and BT.
To play from a USB source, plug in a USB flash drive and make sure that AUX is
disconnected. It will automatically have priority over BT (but not over AUX).
To play from BT source, connect a Bluetooth® enabled device and make sure that
AUX and USB are disconnected.
TROUBLESHOOTING
Factory Reset:
Press and hold “-” and “+” buttons at the same time for 10s to initiate
factory reset. The speaker will revert to factory settings and all previously
paired devices will be deleted. Status LED will blink between blue and red
while resetting.
Low Battery:
If the speaker’s battery is fully depleted, it may not turn ON immediately
even when connected to a power source. Please plug the speaker into an
appropriate power source and let it charge for at least 10 minutes before
turning it ON.
Speaker is not playing wirelessly:
If the speaker is not playing audio although it’s connected to a Bluetooth™
device, it may be because of the audio connection priority. Disconnect any AUX
or USB-A cables that may be connected to the speaker and try again.
SPECIFICATIONS
- Bluetooth® Version ：5.3
- Battery Capacity: 11.1V/3600mAh
- Charging Input: DC 5V/2.2A
- Playtime: 12 hours (Based on 77dBSPL(c) with light show OFF)
- Charging Time: 4.5-5 hours
- Operating Range: 10M
- Rated Power: 40W+10W
- Audio Inputs: Bluetooth®, USB-A, Aux 3.5mm
- Charging Outputs: USB-C, USB-A
- Battery Standby Time: 365 Days
- IPX Rating: IPX7 (water immersion of 1m, for up to 30 min)
SCAN FOR SUPPORT
OVERVIEW
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated within 20cm minimum distance between the radiator & your body.
Canada warning:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: This device may
not cause interference. This device must accept any interference, including
interference that may cause undesired operation of the device.
- MODEL: 2SKSK1850
- Website: Skullcandy.com
1 YEAR WARRANTY
- Support: 877-543-3540
Packaging includes:
- Stomp™ Mini Speaker
- 5ft Charging Cable
- User Manual
2023© Skullcandy is a registered trademark Marketed and distributed by Lifeworks Technology Group LLC., New York, NY 10018. USB Type-A™, USB Type-C™, and USB-C™ are trademarks of USB Implementers Forum. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Lifeworks Technology Group LLC. is under license. All brands are registered trademarks of their respective companies. *Actual product may differ slightly from images. Made in China.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>