CRYSTORAMA ELL-B3004-PN Elliot Four Light Pendant Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ELL-B3004-PN Elliot Four Light Pendant
Product Information
- Model Number: ELL-B3004-PN
- Product Type: Hanging/Ceiling Light Fixture
- Maximum Wattage: 60 Watts per Candelabra Bulb (4 bulbs required)
- Product Components:
- Mounting Hardware (Mounting Plate, Wire Nut, Outlet Box Screws)
- Screw Collar Loop
- Ball Nut (2 required)
- Collar Ring
- Quick Link (2 required)
- Loop
- Metal Frame
- Nuts (54 required)
- Metal Cap (54 required)
- Warning: This product contains Lead which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov
Product Usage Instructions
Hanging Installation:
- Put the metal cap over the top of the lucite rod and then attach it to the frame by nuts.
- Decide the preferred hanging height and choose the chain needed.
- Install the screw collar loop onto the frame.
- Hang the fixture on the desired location using the chain.
Ceiling Installation:
Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- Remove the fixture loop and attach the canopy with two mounting holes onto the frame.
- Fix the mounting plate to the ceiling using mounting hardware (included) and connect the canopy to the mounting plate using quick links (included).
- Install the frame onto the mounting plate.
Note: Use candelabra LED bulbs for extended use.
OVERVIEW
For Hanging:
WARNING All electrical
components must be installed by a licensed electrician in accordance with the
National Electric Code and the appropriate local electrical codes. You will
need 4-Candelabra Bulb 60 watts Max Bulb not included USE LED BULBS FOR
EXTENDED USE This fixture is DRY rated
How to Install
- Put the metal cap over the top of lucite rod and then attach it onto the frame by nuts.
- Decide the preferred hanging height and choose the chain needed.
- Fix the mounting plate to the ceiling and connect the canopy to the mounting plate.
For ceiling mount
- Take the fixture loop off and attach the canopy with two mounting holes onto the frame.
- Install the frame onto the ceiling.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
PART NUMBER MODEL # ELL-B3004-PN
Part Number
- A. Mounting Hardware
- (1 ) Mounting Plate
- (3) Wire Nut
- (2) Outlet Box Screws
- B. (1) Screw Collar Loop
- C.(1) Canopy;06’x0.9″h;XMO3004PNHCAN6IN
- D. Mounting Hardware
- (1 ) Mounting Plate
- (3) Wire Nut
- (2) Outlet Box Screws
- E. (1) Canopy;06″x0.9″h;XMO3004PNCAN6IN
- F. (2) Ball nut; XMO3004PNBANUT
- G.(1) Collar Ring
- H. (2) Quick Link
- I. (1 ) Chain;72″Lx 05.0mmT;XMO3004PNCHA5MM
- J.(1) Loop
- K. (1 ) Metal frame
- L.(54) Nuts;XMO3002PNBANUT
- M.(54 ) Metal cap
- N. (27) Lucite rod;01.5″x9″h; XM03004LUCROD9IN
- 0.(4) Candle Sleeve; 01″x2.5″h;XMO3002PNCDL2.5IN
