ROCCAT KONE XP AIR Wireless Gaming Mouse User Manual

ROCCAT KONE XP AIR Wireless Gaming Mouse

Content

• USB-C Cable

• Dongle

• Stand

• Mouse

DEFAULT BUTTON ASSIGNMENT (no driver installed)

STANDARD

1. Left mouse button
2. Right mouse button
3. Universal scroll
4. Tilt left
5. Tilt right
6. Scrol up
7. Scrol down
8. Key press “R”
9. Key press “G”
10. IE forward
11. IE back
12. DPl up
13. DPl down
14. Easy-Shift[+J™
15. Profile Button/ Cycle Profiles

EASY-SHIFT(+)™

• 14+1 Left mouse button
• 14+2 Right mouse button
• 14+3 Multimedia play/pause
• 14+’4 Previous media track
• 14+5 Next media track
• 14+8 Volume up
• 14+7 Volume down
• 14+8 Key press “1”
• 14+9 Key press “2”
• 14+10 Key press “3”
• 14+11 Key press “4”
• 14+12 Key press “5”
• 14+13 Key press “S”
• 14+14 Disabled
• 14+15 Not assigned

Dock

“Battery Status” RGB effect based on battery level of mouse

• 100-80%: White static
• 50-80%: Green static
• 20-50%: Yellow static
• <20%: Red static & Shows charging status when charging mouse as well
  • 100-80%: White breathing
  • 50-80%: Green breathing
  • 20-50%: Yellow breathing
  • <20%: Red breathing

QUICK START GUIDE

1.  Plug the wireless, dongle into any free LJSIB port on your PC or laptop. Alternatively, enable Bluetooth®.
   

2. Select 2.4GH mode on the connection mode slider 1.mdernea ,h he mouse to connect via dongle.
   Alternatively, select Bluetooth0 mode to connect via Bluetooth.
   

3. Hold down the profile button for 3 seconds to enable pairing mode. If you’re connecting via dongle. the mouse will be paired automatically.
   If you’re connecting via Bluetooth. you’ll need to pair manually via the Bluetooth settings in your device.

4. Navigate to www.roccat.com/downloads and download the latest driver.

5. Complete the installation to get access to all software features and setup.

TECHNICAL FACTS

• Radio frequency: 2400MHz
• Operating frequency: 2402~2480MHz
• Max. Output power: 7.39dBm(Peak Power)/7.29dBm(Avg. Power)
• Operating temperature: 0-40°C
• Rated input voltage: 5V。
• Rated input current: 500mA

System Requirement

• Windows® 7, 8, 10 & 11 (software support)
• 7、8、10 & 11
• USB 2.0 (or higher)
• Internet connection (for driver software)

Disposal information

The crossed-out wheelie-bin symbol means that you must not dispose of this product together with unsorted household waste As electrical devices can contain harmful substances which may cause environmental damage or harm to your health if not disposed of correctly, please dispose of these products separately. As the end user, you are required by law to dispose of used electrical equipment at an official recycling point. For information about local recycling points, contact your local authority, civic amenity site or the business where you purchased this product. By disposing of electrical products at an official recycling point, you are doing your bit to ensure equipment is recycled correctly and professionally, and our environment is protected. When purchasing a new product, the retailer will let you hand in old products and dispose of them free of charge provided the product you are handing in is of a similar type and has the same functions as the product you are purchasing.You can hand in small used electrical and electronic equipment (measuring no longer than 25 cm on any one side) for free and with no obligation to purchase a similar product at electrical and electronic retail outlets with sales areas larger than 400m2 or at nearby recycling points designated by the retail outlet. Wherever possible, remove any batteries before disposing of the device. Under law, as a user you face the risk of penalties if you dispose of devices and batteries illegally.

Technical support

Having technical problems with this product? Get in touch with our Support team — the quickest way is via our website: www.roccat.com/support Please keep this information for later reference.

FCC CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (11 this device may not cause harmful interference and (2) this device must accept any interference received, including Interference that may cause undesired operation.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver Is connected.
• Consult the dealer or an experienced radio/TV technician for help.

GENERAL SAFETY GUIDEUNES AND INTENDED USE

1. Do not open or modify the product.
2. Not approved changes or modifications may void the operation authority and/or warranty.
3. In case of trouble or doubt, contact us immediately.
4. Keep the product away from fire/water/humidity/temperature extremes.
5. Only use as intended with a compliant PC and connector part.
6. Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
7. Don’t look into the light beam on bottom of the mouse.

BATTERY SAFETY GUIDEUNES

1. Improperly treated rechargeable batteries may catch fire or cause chemical damages and injuries.
2. Do not disassemble or modify the battery in any way.
3. If battery is damaged or appears abnormal, stop using it.
4. Do not short-circuit the battery.
5. Do not leave the battery discharged or unused for extended time periods
6. If battery is replaceable by design, do not apply higher forces which may damage the battery
7. Only use original equipment and cables for charging.

Hereby, Voyetra Turtle Beach Inc. declares that Kone Pro Air is in compliance with Directive 2014/30/EU(EMC), Directive 2014/53/EU(RED), 2014/35/EU(Safety), 2015/863 amending Annex II to 2011/65/EC(RoHS), Electromagnetic Compatibility Regulations 2016(EMC), Radio Equipment Regulations 2017(Radio), Electrical Equipment Regulations 2016(Safety), 2012/19/EU (WEEE] , 2006/1907/EU (REACH), 94/92/EU (PACKAGING], 2006/66/EU (Battery). 2009/48/EC (Toy safety), The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 The full text of the EU/UK declaration of conformity is available at the following internet address: http://www.turdebeach.com/homologation Radio frequency: 2400MHz Operating frequency: 2400-2483.5MHz Output power: 0.035 dBm

RF RADIATION EXPOSURE & HAZARD STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not co-located or operating in conjunction with any other antenna or transmitter. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF RADIATION EXPOSURE & HAZARD STATEMENT

The product complies with Canada portable RF exposure limits set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

VOYETRA TURTLE BEACH, INC. 144 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA

© 2021 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners, Information contained herein is subject to change without notice, 2021 Voyetra Turtle Beach, Inc shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or r placed if the goods fail to be of acceptable quality and the failure does not amount to a major failure. BSMI PRFMNIVPAERP,OLL https://www.roccat-neon.com/Bsmi

If the battery needs to be replaced, it must be repaired by a certified technician who uses the original battery. Replacement operations performed by untrained technicians may not follow the correct safety and maintenance procedures and may result in improper replacement or maintenance. This may also damage the battery, cause overheating, fire and explosion, or cause injury.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>