FUNKOL 21S0LYP304-32 Large Rectangular Frameless Anti-Fog Wall Mount Bathroom Vanity Mirror Instruction Manual
- June 12, 2024
- FUNKOL
Table of Contents
FUNKOL 21S0LYP304-32 Large Rectangular Frameless Anti-Fog Wall Mount
Bathroom Vanity Mirror
Product Information
The product is a plug with three wires: green (ground), white (live), and black (neutral). The green wire should be connected to the middle wire of the plug, the white wire should be connected to the wire with the plug with four wires on it, and the black wire should be connected to the wire with a smooth surface of the plug. When the power is turned on, the lights and defogging function will be automatically turned on. The product has three light color options: natural light, warm yellow, and white light. The power button can be used for adjusting the light color and turning the light on/off. A long touch on the power button will dim thecurrently selected light. When the switch is turned off, the defogging function will also be turned off. Additionally, the defogging function will turn off automatically after one hour to save electricity. The function can be re-opened by re-touching the switch.
Product Usage Instructions
- Connect the green wire to the middle wire of the plug, white wire to the wire with four wires on it, and black wire to the wire with a smooth surface of the plug.
- Turn on the power to automatically turn on lights and defogging function.
- To adjust the light color, short touch the power button.
- Select from three light color options – natural light, warm yellow, and white light.
- To turn the light on/off, short touch the power button again.
- For dimming the currently selected light, long touch on the power button.
- To turn off the defogging function, turn off the switch.
- The defogging function will also turn off automatically after one hour to save electricity.
- To re-open the defogging function, re-touch the switch.
IMPORTANT INFORMATION
To avoid the risk of electrocution, please turn OFF the electricity supply mains before commencing the installation.
Do not stand the mirror upright on hard surfaces whilst fitting as th is will damage the edge. Keep the plastic corner protectors on until installation is fully completed.
Tips:
The mirror can be Horizontally Mounted or Vertically Mounted.
Installation
Note: Keep the plastic corner protectors on until installation is fully completed.
- Measure the distance of the mounting hole, Drill holes with a suitable sized drill.
- Insert the anchor and mounting screw into the wall.
- Connect the mirror wires with your main wires and hang the mounting hole to the screw on the wall.
- Peel off the protective film and clean the mirror with a soft cloth.
Power Connection Instruction
Before you start the installation, please ensure that:
- the wall where the product is being installed is able to support the weight of the product
- the main electrical supply has been powered off to complete installation
The terminal connection method: A power cord on the wall is connected to a power cord on the mirror.There are 3 terminals in total.
There are two wiring methods:
- Connect the wire of the mirror to the wire of the wall switch.
- You would see there three wires with three colors–white,green and black.
- Safely connect these three wires one by one to the wires of the wall switch in your home.
* Green=GROUND wire connect to the ground wire in your box,or to the box as a ground
* White=LIVE wire connect to the White LIVE wire in your box.
* Black=Neutral wire connect to the Black Neutral wire in your box.- Connect the wire of the mirror to the wire of the plug and plug it into the socket
The plug has three wires,
- Green=GROUND wire con net to the middle wire of the plug.
- White=LIVE wire connect to the wire with the plug with four wires on it.
- Black=Neutral wire connect to the wire with a smooth surface of the plug
Operation
Lights and defogging will be automatically turned on
when the power is turned on.
Lighting Color Adjust
Short touch the power button to adjust the lighting color.
It has three colors to select,natural light/warm yellow/white light
-
Short touch the power button to turn the light ON/OFF.
Shirt touch again to choose the light(natural light/warm yellow/white light). -
Long touch the power button to dim the currently selecte_d light.
-
When the switch is turned off, the defogging function will also be turned off. In addition, the defogging function will also turn off automatically after one hour in order to save electricity. If you want to re-open this function, you can re-touch the switch.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>