Xiaomi SCXMIVACCLEMINI-1 Handheld Vacuum Cleaner 1C User Manual

June 7, 2024
Xiaomi

Xiaomi SCXMIVACCLEMINI-1 Handheld Vacuum Cleaner 1C

product

For further information, please go to www.mi.com
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Dreame Technology (Tianjin) Limited (a Mi Ecosystem company)
Address: 1-1-804-8, North, Finance Trade Center, 6865, Yazhou Road, Dongjiang Free Trade Zone, Tianjin Pilot Free Trade Zone, Tianjin, China

Safety Instructions

  • To prevent accidents including electric shock or fire caused by improper use, please read this manual carefully before use and retain it for future reference.
  • This product can be used by children aged from 8 years and above and persons with physical, sensory, intellectual deficiencies, or limited experience or knowledge under the supervision of a parent or guardian to ensure safe operation and to avoid any risk of hazards. Cleaning and maintenance shall not be made by children without supervision.
  • The vacuum is not a toy. Children shall not play with or operate this product. Please exercise caution when using the vacuum near children. Do not allow children to clean or maintain the vacuum unless supervised by a parent or guardian.
  • Do not use the vacuum outdoors or on wet surfaces. Only use the vacuum on dry indoor surfaces. Do not touch the plug or any part of the vacuum with wet hands.
  • To reduce the risk of fire, explosion, or injury, check to make sure the lithium battery and charging adapter are undamaged before use. Do not use the vacuum if either the lithium battery or charger is damaged.
  • The soft roller brushbar, battery, Extension Rod, and vacuum are electrically conductive and should not be immersed in water or other liquid. Make sure to dry all filters after cleaning.
  • To prevent injury caused by moving parts, turn off the vacuum before cleaning the soft roller brushbar. The soft roller brushbar, dust compartment, and filter must all be properly installed before using the vacuum.
  • Only use the original charging adapter. Never use an unoriginal adapter, as this may cause the lithium battery to catch re. (The charger is not compatible with Mi Handheld Vacuum Cleaner.)
  • Do not use the vacuum to pick up flammable or combustible liquids, such as gasoline, or bleach, ammonia, drain cleaners or other liquids.
  • Do not use the vacuum to pick up drywall particles, ashes like fireplace ash, or smoking or burning materials such as coal, cigarette butts or matches.
  • Do not use the vacuum to pick up sharp or hard objects, such as glass, nails, screws, or coins, which may damage the machine.
  • Keep hair, loose clothing, fingers and other parts of the body away from the vacuum’s openings and moving parts. Do not point the hose, wand or tools at your eyes or ears or put them in your mouth.
  • Do not put any object into the vacuum’s openings. Do not use the vacuum with any opening blocked. Keep free of dust, lint, hair, or other items which may reduce airflow.
  • Do not rest the vacuum against a chair, table, or other unstable surface, as this may cause damage to the machine or personal injury. If the vacuum becomes damaged from being knocked over or is otherwise malfunctioning, please contact our authorized service department. Never attempt to disassemble the device on your own.
  • All instructions in the manual for recharging the battery must be strictly followed. Failure to properly charge the battery within the specified temperature range could damage the battery.
  • Only use accessories and replacement parts that are approved by Xiaomi.
  • Do not use the vacuum without the clear dust compartment and filter in place.
  • Make sure the vacuum is unplugged when not used for extended periods as well as prior to performing any maintenance or repairs.
  • Please be extra careful when using the vacuum to clean stairs.
  • Do not install, charge, or use this product outdoors, in bathrooms, or around a pool.
  • Fire Hazard Warning: Do not apply any type of fragrance to the vacuum’s filter. These types of products are known to contain flammable chemicals which may cause the vacuum to catch fire.
  • This product is designed for home use only.

We Dreame Technology (Tianjin) Limited, hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

Product Overview

Accessories

accessories

Part Names

part names

Installation

Vacuum and Accessories Installation Diagram

installation

Installing the 2-in-1 Charging & Storage Mount

  1. The 2-in-1 charging & storage mount is an optional accessory, you can install it based on your requirements.
  2. The mount should be installed in a cool, dry place near a power outlet, out of direct sunlight, and away from moisture-prone areas, such as a kitchen.
  3. Securely install the mount using mounting hardware suitable for the type of wall selected. Make sure the installation area is clear of any pipes such as gas or water lines, and air ducts, electric wires and cables, or drainage lines.installation 1
  4. It is recommended to hire a professional to install the mount and to use protective clothing, goggles, and other protective equipment where necessary.
  5. Using an electric drill, mark and drill two 8 mm diameter holes into the wall where desired to a depth of about 30 mm. Insert the wall plugs into the holes, position the mount, then fasten it to the wall with the included screws.

installation 2

How to Use

Charging
Battery Status Indicator

chargingCharge the vacuum with the power adapter

Note:

  • Fully charge the vacuum before using it for the first time. This will take about 4 hours.
  • Vacuum cannot be used while charging.
  • Vacuuming at turbo mode for a prolonged period will cause the battery to heat up, which increases charging time. Allow the vacuum to cool down for 30 minutes before charging it.
  • Charging adapter is not compatible with Mi Handheld Vacuum Cleaner.

charging 1 Charge the vacuum on the charging mount

Using Different Attachments

Electric Mite Brush: Strong vibrations yield deep cleaning action for removing mites and dust from mattresses and fabric surfaces.

how to use

2-in-1 Brush Nozzle: Suitable for vacuuming up dust and mites on beds, sofas, and other furniture fabric.

how to use 1

Note:

  • If any rotating part becomes stuck, the vacuum may turn off automatically. Remove any trapped foreign objects, then resume use.
  • The vacuum will automatically shut off if its motor enters overheat protection mode. Wait until the motor’s temperature returns to normal before resuming use.

2-in-1 Crevice Nozzle: Suitable for vacuuming cracks, corners of doors and windows, stairs, and other hard to reach places.

how to use 2

Soft Roller Brushbar: Suitable for vacuuming the hard surfaces such as oor, tile, marble, as well as for vacuuming up larger pieces of dirt and debris. The soft roller brushbar can also be directly attached to the vacuum.

how to use 3

Care & Maintenance

Tips

  • Always use genuine parts to keep your warranty from being voided.
  • If the filter or nozzle becomes clogged, the vacuum will stop working shortly after being turned on. To restore functionality, clean the filter or nozzle.
  • If the vacuum will not used for an extended period, fully charge it, unplug its power adapter, and store it in a cool, low-humidity environment away from direct sunlight. To avoid over-discharging the battery, recharge the vacuum at least once every 3 months.

care and maintenance

Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.

Cleaning the Dust Compartment
Before cleaning the dust compartment, disconnect the adapter and keep the vacuum’s power switch in the off position. The vacuum’s cleaning ability will be reduced if the dust compartment is filled to the “MAX” mark. To regain performance, empty the compartment.
To empty the dust compartment: Press the release button on the bottom of the compartment, then empty its contents.

care and maintenance 1

Cleaning the Cyclone Assembly

  1. Rotate the cyclone assembly in the direction illustrated to unlock it, then remove the cyclone assembly.care and maintenance 2
  2. Rinse the cyclone assembly with water until it is clean. To thoroughly dry the cyclone assembly, keep it in a ventilated or cool place for at least 24 hours.care and maintenance 3 Note: Do not clean the cyclone assembly in a dishwasher or washing machine, and do not attempt to dry it in a tumble dryer, oven, microwave, or near an open fire.
  3. Once it is dry, reinstall the cyclone assembly.

Cleaning the HEPA Filter Assembly

  1. Place the vacuum securely on a flat surface, then turn the HEPA filter assembly cover in the direction indicated and remove the HEPA filter assembly.
    Note: Remove the built-in foam pad before cleaning the HEPA filter assembly. Rinse the HEPA filter andcare and maintenance
4

  2. Rinse the HEPA filter and foam pad with water. To thoroughly remove all dust caught in the filter, rotate the HEPA filter by 360 degrees while rinsing. Lightly tap the filter against a sink several times to remove any excess debris. Keep the HEPA filter in a well-ventilated and cool place to fully dry.
    Note: Fully dry the filter (at least 24 hours) before reinstalling it.

care and maintenance 5

Cleaning the Soft Roller Brushbar and Electric Mite Brush

Note: To prevent injury from accidentally turning on the vacuum, make sure the soft roller brushbar or electric mite brush is detached from the vacuum before removing the head. The mite brush and soft roller brushbar contain electrical components, and the soft roller brushbar head also contains bearings. Do not wash these parts with water. Be careful of sharp objects when removing debris caught in the heads of mite brush and soft roller brushbar.

Clean the Soft Roller Brushbar

  1. Push the brushbar head release button in the direction of the arrow until the cover of the brushbar head pops to open, then remove the brushbar head by lifting it in the direction indicated.
  2. After you have finished cleaning soft roller brushbar, reinsert it by following the disassembly steps in reverse.

care and maintenance 6

Clean the Electric Mite Brush

1. Use a coin as illustrated to rotate the lock counterclockwise until you hear a click.
Note: It is recommended to clean the electric mite brush after each use.care and maintenance 72. After unlocking the brush head, remove it from the electric mite brush, then rinse and clean the brush head.care and
maintenance 83. Stand the brush head upright in a well-ventilated area for at least 24 hours until it is fully dry.care and maintenance
94. Once the soft roller brushbar is dry, reinstall it by following the disassembly steps in reverse.

care and maintenance 10

Specifications

specification

This product contains batteries that can only be replaced by qualified technicians or after-sales service.
This product contains batteries that are non-replaceable.

WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Troubleshooting

If the vacuum is not working properly, please refer to the table below.

troubleshooting

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals