PROAIM LB230 SnapRig L-Bracket User Manual
- October 30, 2023
- PROAIM
Table of Contents
SnapRig L-Bracket (LB230)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Snap Rig L-Bracket Setup
- There is a magnetized screwdriver at the bottom of the Snap Rig.
- Use the magnetized screwdriver to loosen the screw.
- Now, extend the side plate.
- Loosen the knob of the ball head and remove the camera plate.
- Mount the Snap Rig and tighten the knob of the ball head.
- Now, mount the Snap Rig vertically on the ball head.
YOUR PROAIM SNAPRIG PROFESSIONAL KIT ALL DRESSED UP AND READY TO GO!
Warranty: We offer one year warranty for our products from date of
purchase. Within this period of time, we will repair it without charge for
labor or parts. Warranty doesn’t cover transportation costs nor does it cover
a product subjected to misuse or accidental damage. Warranty repairs are
subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not
supply or from mishandling in transit, accident, misuse, neglect, lack of care
of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us
immediately and we promise our utmost support and care until you use our
product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>